The Study of HC Emission Characteristics and Combustion Stability with Spark Timing Retard at Cold Start in Gasoline Engine Vehicle

2000 ◽  
Author(s):  
Myung-Sik Choi ◽  
Ha-Yung Sun ◽  
Cheol-Hee Lee ◽  
Cha-Lee Myung ◽  
Woo-Tae Kim ◽  
...  
Keyword(s):  
Gasoline Engine ◽  
Cold Start ◽  
Combustion Stability ◽  
Emission Characteristics ◽  
Spark Timing

Spark timing effect on performance of gasoline engine fueled with mixture of hydrogen–gasoline

2017 ◽  
Vol 42 (52) ◽  
pp. 30813-30820 ◽  
Author(s):  
Ismail M.M. Elsemary ◽  
Ahmed A.A. Attia ◽  
Kairy H. Elnagar ◽  
Mahmoud S. Elsaleh
Keyword(s):  
Gasoline Engine ◽  
Timing Effect ◽  
Spark Timing

An experimental study on optimal spark timing control for improved performance of a flex fuel vehicle engine

2019 ◽  
Vol 234 (5) ◽  
pp. 1294-1303
Author(s):  
Junsang Yoo ◽  
Taeyong Lee ◽  
Pyungsik Go ◽  
Yongseok Cho ◽  
Kwangsoon Choi ◽  
...  
Keyword(s):  
Empirical Equation ◽  
Interpolation Method ◽  
Linear Interpolation ◽  
Combustion Characteristics ◽  
Combustion Stability ◽  
Timing Control ◽  
Vehicle Engine ◽  
Spark Timing ◽  
Linear Interpolation Method ◽  
Blended Fuels

In the American continent, the most frequently used alternative fuel is ethanol. Especially in Brazil, various blends of gasoline–ethanol fuels are widely spread. The vehicle using blended fuel is called flexible fuel vehicle. Because of several selections for the blending ratios in gas stations, the fuel properties may vary after refueling depending on a driver’s selection. Also, the combustion characteristics of the flexible fuel vehicle engine may change. In order to respond to the flexible fuel vehicle market in Brazil, a study on blended fuels is performed. The main purpose of this study is to enhance performance of the flexible fuel vehicle engine to target Brazilian market. Therefore, we investigated combustion characteristics and optimal spark timings of the blended fuels with various blending ratios to improve the performance of the flexible fuel vehicle engine. As a tool for prediction of the optimal spark timing for the 1.6L flexible fuel vehicle engine, the empirical equation was suggested. The validity of the equation was investigated by comparing the predicted optimal spark timings with the stock spark timings through engine tests. When the stock spark timings of E0 and E100 were optimal, the empirical equation predicted the actual optimal spark timings for blended fuels with a good accuracy. In all conditions, by optimizing spark timing control, performance was improved. Especially, torque improvements of E30 and E50 fuels were 5.4% and 1.8%, respectively, without affecting combustion stability. From these results, it was concluded that the linear interpolation method is not suitable for flexible fuel vehicle engine control. Instead of linear interpolation method, optimal spark timing which reflects specific octane numbers of gasoline–ethanol blended fuels should be applied to maximize performance of the flexible fuel vehicle engine. The results of this study are expected to save the effort required for engine calibration when developing new flexible fuel vehicle engines and to be used as a basic strategy to improve the performance of other flexible fuel vehicle engines.

Tumble Flow Measurements Using Three Different Methods and Its Effects on Fuel Economy and Emissions

2006 ◽  
Author(s):  
Myoungjin Kim ◽  
Sihun Lee ◽  
Wootae Kim
Keyword(s):  
Fuel Economy ◽  
High Performance ◽  
Gasoline Engine ◽  
Exhaust Emissions ◽  
Combustion Stability ◽  
Lean Burn ◽  
Flow Measurements ◽  
Part Load ◽  
Gasoline Engines ◽  
Dynamometer Test

In-cylinder flows such as tumble and swirl have an important role on the engine combustion efficiencies and emission formations. In particular, the tumble flow, which is dominant in-cylinder flow in current high performance gasoline engines, has an important effect on the fuel consumptions and exhaust emissions under part load conditions. Therefore, it is important to know the effect of the tumble ratio on the part load performance and optimize the tumble ratio of a gasoline engine for better fuel economy and exhaust emissions. First step in optimizing a tumble flow is to measure a tumble ratio accurately. In this research the tumble flow was measured, compared and correlated using three different measurement methods: steady flow rig, 2-Dimensional PIV, and 3-Dimensional PTV. Engine dynamometer test was performed to find out the effect of the tumble ratio on the part load performance. Dynamometer test results of high tumble ratio engine showed faster combustion speed, retarded MBT timing, higher exhaust emissions, and a better lean burn combustion stability. Lean limit of the baseline engine was expanded from A/F=18:1 to A/F=21:1 by increasing a tumble ratio using MTV.

Experimental and simulation study on the effect of ZSM-5 hydrocarbon catcher on the emission of gasoline engine during cold start

Fuel ◽  
2021 ◽  
pp. 122661
Author(s):  
Changling Feng ◽  
Yuanwang Deng ◽  
Yan Tan ◽  
Wei Han ◽  
Jiaqiang E ◽  
...  
Keyword(s):  
Simulation Study ◽  
Gasoline Engine ◽  
Cold Start

Effects of passive pre-chamber jet ignition on combustion and emission at gasoline engine

2021 ◽  
Vol 13 (12) ◽  
pp. 168781402110671
Author(s):  
Wei Duan ◽  
Zhaoming Huang ◽  
Hong Chen ◽  
Ping Tang ◽  
Li Wang ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Gasoline Engine ◽  
Combustion Process ◽  
Pressure Rise ◽  
Spark Ignition ◽  
Combustion Stability ◽  
Intake Valve ◽  
Part Load ◽  
Significant Difference ◽  
Valve Opening

Pre-chamber jet ignition is a promising way to improve fuel consumption of gasoline engine. A small volume passive pre-chamber was tested at a 1.5L turbocharged GDI engine. Combustion and emission characteristics of passive pre-chamber at low-speed WOT and part load were studied. Besides, the combustion stability of the passive pre-chamber at idle operation has also been studied. The results show that at 1500 r/min WOT, compared with the traditional spark ignition, the combustion phase of pre-chamber is advanced by 7.1°CA, the effective fuel consumption is reduced by 24 g/kW h, and the maximum pressure rise rate is increased by 0.09 MPa/°CA. The knock tendency can be relieved by pre-chamber ignition. At part load of 2000 r/min, pre-chamber ignition can enhance the combustion process and improve the combustion stability. The fuel consumption of pre-chamber ignition increases slightly at low load, but decreases significantly at high load. Compared with the traditional spark ignition, the NOx emissions of pre-chamber increase significantly, with a maximum increase of about 15%; the HC emissions decrease, and the highest decrease is about 36%. But there is no significant difference in CO emissions between pre-chamber ignition and spark plug ignition. The intake valve opening timing has a significant influence on the pre-chamber combustion stability at idle operation. With the delay of the pre-chamber intake valve opening timing, the CoV is reduced and can be kept within the CoV limit.

Sign in / Sign up

Export Citation Format

Share Document