Molded or Extruded Bar, Rod, and Shapes Made from Polyamide-Imide (PAI) Plastic Material Both Filled and Unfilled Grades for High-Impact Strength and Mechanical Strength Applications in High Temperature Environments

2021 ◽  
Author(s):  
Keyword(s):  
High Temperature ◽  
Impact Strength ◽  
Mechanical Strength ◽  
Plastic Material ◽  
High Impact ◽  
High Impact Strength

SIMOCH

Alloy Digest ◽  
1966 ◽  
Vol 15 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Impact Strength ◽  
Cold Work ◽  
Heat Treating ◽  
High Impact ◽  
High Shock ◽  
Alloy Tool ◽  
High Impact Strength ◽  
Shock Resistance

Abstract SIMOCH is a low alloy tool steel having high shock resistance, high impact strength and excellent wear resistance. It is recommended for many hot work and cold work applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-186. Producer or source: Teledyne Vasco.

RMI 6Al-2Cb-1Ta-0.8Mo

Alloy Digest ◽  
1967 ◽  
Vol 16 (12) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Impact Strength ◽  
Base Alloy ◽  
Heat Treating ◽  
High Impact ◽  
Good Corrosion Resistance ◽  
Deep Diving ◽  
High Impact Strength ◽  
Reactive Metals

Abstract RMI-6A1-2Cb-1Ta-0.8Mo is a titanium-base alloy recommended for parts requiring high impact strength along with good corrosion resistance, especially for deep diving under sea vehicles. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on forming, heat treating, machining, and joining. Filing Code: Ti-53. Producer or source: Reactive Metals Inc..

ISOPLAST 101 UNREINFORCED

Alloy Digest ◽  
1989 ◽  
Vol 38 (10) ◽  
Keyword(s):  
Fracture Toughness ◽  
Wear Resistance ◽  
Impact Strength ◽  
High Impact ◽  
Thermoplastic Polymer ◽  
Moisture Sensitivity ◽  
Chemical Company ◽  
High Impact Strength ◽  
Rigid Amorphous ◽  
Excellent Chemical

Abstract ISOPLAST 101, unreinforced, is a rigid, amorphous polyurethane thermoplastic polymer. It is opaque and impact modified. It is injection moldable and extrudable. It is characterized by its high impact strength, high abrasion resistance, excellent chemical and solvent resistance and low moisture sensitivity. This datasheet provides information on composition, physical properties, and tensile properties as well as fracture toughness. It also includes information on wear resistance. Filing Code: P-10. Producer or source: The Dow Chemical Company.

Effect of Dynamic Crosslinking on Mechanical Properties of PP/EPDM Blends

1993 ◽  
Vol 58 (11) ◽  
pp. 2642-2650 ◽  
Author(s):  
Zdeněk Kruliš ◽  
Ivan Fortelný ◽  
Josef Kovář
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Shear Modulus ◽  
High Impact ◽  
Necessary Condition ◽  
Step Method ◽  
Melt Mixing ◽  
One Step ◽  
High Impact Strength ◽  
Dynamic Curing

The effect of dynamic curing of PP/EPDM blends with sulfur and thiuram disulfide systems on their mechanical properties was studied. The results were interpreted using the knowledge of the formation of phase structure in the blends during their melt mixing. It was shown, that a sufficiently slow curing reaction is necessary if a high impact strength is to be obtained. Only in such case, a fine and homogeneous dispersion of elastomer can be formed, which is the necessary condition for high impact strength of the blend. Using an inhibitor of curing in the system and a one-step method of dynamic curing leads to an increase in impact strength of blends. From the comparison of shear modulus and impact strength values, it follows that, at the stiffness, the dynamically cured blends have higher impact strength than the uncured ones.

scholarly journals Comparison of Flexural Strength between Fiber-Reinforced Polymer and High-Impact Strength Resin

2008 ◽  
Vol 173 (10) ◽  
pp. 1023-1030 ◽  
Author(s):  
Denis Vojvodic ◽  
Franjo Matejicek ◽  
Ante Loncar ◽  
Domagoj Zabarovic ◽  
Dragutin Komar ◽  
...  
Keyword(s):  
Impact Strength ◽  
Flexural Strength ◽  
High Impact ◽  
Fiber Reinforced Polymer ◽  
Fiber Reinforced ◽  
Reinforced Polymer ◽  
High Impact Strength

Optimizing GMAW parameters to achieve high impact strength of the dissimilar weld joints using Taguchi approach

2021 ◽  
Author(s):  
M. Ramarao ◽  
M. Francis Luther King ◽  
A. Sivakumar ◽  
V. Manikandan ◽  
M. Vijayakumar ◽  
...  
Keyword(s):  
Impact Strength ◽  
High Impact ◽  
Taguchi Approach ◽  
Dissimilar Weld ◽  
Weld Joints ◽  
High Impact Strength

Physical properties of biaxially oriented PA6 film for simultaneous stretching and sequential processing

2011 ◽  
Vol 31 (1) ◽  
Author(s):  
Masao Takashige ◽  
Toshitaka Kanai
Keyword(s):  
Impact Strength ◽  
Physical Properties ◽  
Physical Property ◽  
High Impact ◽  
Thermal Shrinkage ◽  
Double Bubble ◽  
Biaxial Stretching ◽  
High Impact Strength ◽  
The Difference ◽  
Stretching Process

Abstract There are two different stretching processes that produce the biaxially oriented film, namely the tenter process and double bubble tubular film process. Furthermore, there are two tenter processes, i.e., the sequential biaxial stretching process and simultaneous biaxial stretching process. There is no report describing the difference among film physical properties of the three different processes. The biaxially oriented polyamide film using the double bubble tubular process has good balanced physical property and high impact strength, thus it is used for proper applications utilizing their advantage properties. In this report, the influence of each biaxial stretching process on film physical properties of polyamide, which has hydrogen bond, was studied in detail. As a result, the tentering process film has anisotropic tensile properties between machine direction (MD) and transverse direction (TD). This result was influenced by a later stretching process, namely TD stretching. On the contrary, the double bubble tubular film has good balanced properties, especially thermal shrinkage and impact strength. Tentering simultaneous stretching film has much larger shrinkage in MD than in TD. The sequential stretching film has larger shrinkage in TD than in MD. The double bubble tubular film has high impact strength, because it corresponds to the balanced molecular orientation.

Sign in / Sign up

Export Citation Format

Share Document