scholarly journals Effect of Organic Alternative Scouring Agents on Structure of Cellulose/Polyester Blend Fabric

2020 ◽  
Vol 24 (7) ◽  
pp. 1175-1179
Author(s):  
A.U. Barambu ◽  
D.E.A. Boryo ◽  
H.M. Adamu ◽  
N.M. Lawal ◽  
A.B. Mustapha
Keyword(s):  
Structural Analysis ◽  
Crystallite Size ◽  
Structural Modification ◽  
Crystallinity Index ◽  
Amorphous Region ◽  
Crystalline Region ◽  
X Ray Diffraction ◽  
X Ray ◽  
The Difference ◽  
Blend Fabric

This study investigated the effect of organic alternative scouring agents on structure of cotton/polyester blend fabric. A structural modification for a cellulose/polyester blend has been carried out using (COOH)2, CH3COOH and CH3CH2OH alternative scouring agents and NaOH was used as control. The scoured fabrics were then subjected to structural analysis using X-ray diffraction in order to expose the possible modifications on the pretreated fabrics. The samples showed possibilities of being highly competitive with the conventional agent. These inferences were drawn from the difference in the crystallinity index of scoured samples (10.10-60.03%), the crystallite size of scoured samples (6-9 nm) in the crystalline region (6-11 nm), in the amorphous region, inter-planar spacing of the scoured samples (0.340-0.350 nm) of the crystalline region and (0.360-0.390 nm) of the amorphous region of sample and number of crystalline planes of the scoured sample is (3-10) of the cellulose/polyester blend fabric samples via X-ray diffraction studies. Keywords; Cellulose, Fabric, Organic, Polyester, Scouring Agents

scholarly journals EFFECT OF INORGANIC ALTERNATIVE SCOURING AGENTS ON STRUCTURE OF CELLULOSE/POLYESTER BLEND FABRIC

2020 ◽  
Vol 45 (4) ◽  
Author(s):  
A. U. Barambu ◽  
D. E. A. Boryo ◽  
H. M Adamu ◽  
K. M Yahuza ◽  
A. Abdulkadir
Keyword(s):  
Structural Modification ◽  
Crystallinity Index ◽  
Amorphous Region ◽  
The Other ◽  
Crystalline Region ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scouring Process ◽  
20 Nm ◽  
Blend Fabric

In this research, a structural modification for a cellulose/polyester blend has been carried out using NH4OH, (NH4)2C2O4 and liquid NH3 which are environmentally friendly alternative scouring agents with NaOH as control. The scouring process was carried out on the samples with these alternative agents. Investigation into structural modification of cellulose/polyester blend fabric using NH4OH, (NH4)2C2O4 and liquid NH3 and its structural characterization with X-ray diffraction was carried. The results showed the inferences variation in the crystallinity index of scoured samples from (3.21-65.30%), the crystallite size of scoured samples (1.9-15 nm) in the crystalline region and (7-20 nm) in the amorphous region, inter-planar spacing of the scoured samples (0.340-0.350 nm) of the crystalline region and (0.350-0.340 nm) of the amorphous region and number of crystalline planes of the scoured samples is (3-11) of the cellulose/polyester blend fabric samples via X-ray diffraction studies. Among these alternative agents (NH4)2C2O4 and NH4OH showed better interaction with both amorphous and crystalline regions of the cellulose/polyester blend fabric samples without loss in crystallinity when used as scouring agents, and the possibilities of being a superior alternative with significant effect on the structures of the cellulose/polyester blend, while the other samples showed possibilities of being highly competitive with the conventional agent.

scholarly journals Study on the Evaluation of Thermal Damage According to the Manufacturing Conditions of Korean Paper

2021 ◽  
Vol 37 (6) ◽  
pp. 648-658
Author(s):  
Ji Won Kim ◽  
Se Rin Park ◽  
Ki Ok Han ◽  
Seon Hwa Jeong
Keyword(s):  
Crystallinity Index ◽  
Amorphous Region ◽  
Xrd Analysis ◽  
Crystalline Region ◽  
X Ray Diffraction ◽  
Raman Spectroscopic ◽  
Ft Ir ◽  
Ir Analysis ◽  
Ph Level ◽  
Ft Ir Spectroscopy

In this study, we aimed to analyze the chemical changes that occur in Korean paper in an accelerated deterioration environment of 105℃. We selected the Korean paper produced with different types of cooking agents (plant lye, Na2CO3) and during different manufacturing seasons (winter, summer). The degree of deterioration of the Korean paper was confirmed by measuring the brightness, yellowness, and pH level, and the degree of change in each vibrational region of cellulose as deterioration progressed through infrared (FT-IR) spectroscopy. The FT-IR analysis showed that, as deterioration progressed, the absorbance of the amorphous region in cellulose decreased, whereas the absorbance of the crystalline region slightly increased. X-Ray diffraction (XRD) analysis and Raman spectroscopy were performed to verify the changes in the crystalline and amorphous regions in cellulose indicated by the FT-IR results. Furthermore, the crystallinity index (CI) was calculated; it showed a slight increase after deterioration; therefore, CI was confirmed to follow the same trend as that observed for absorbance in the FT-IR results. In addition, as a result of Raman spectroscopic analysis, the degree of decomposition of the amorphous region in the cellulose under the manufacturing conditions was confirmed by the fluorescence measured after the deterioration.

Antiphase Boundaries in Ordered Ni3FE Crystals

1969 ◽  
Vol 27 ◽  
pp. 62-63
Author(s):  
Y. H. Liu
Keyword(s):  
Domain Size ◽  
Antiphase Domain ◽  
X Ray Diffraction ◽  
X Ray ◽  
Hardening Mechanism ◽  
Superlattice Structure ◽  
Disordered Phase ◽  
Domain Boundaries ◽  
Atomic Scattering ◽  
The Difference

Ordered Ni3Fe crystals possess a LI2 type superlattice similar to the Cu3Au structure. The difference in slip behavior of the superlattice as compared with that of a disordered phase has been well established. Cottrell first postulated that the increase in resistance for slip in the superlattice structure is attributed to the presence of antiphase domain boundaries. Following Cottrell's domain hardening mechanism, numerous workers have proposed other refined models also involving the presence of domain boundaries. Using the anomalous X-ray diffraction technique, Davies and Stoloff have shown that the hardness of the Ni3Fe superlattice varies with the domain size. So far, no direct observation of antiphase domain boundaries in Ni3Fe has been reported. Because the atomic scattering factors of the elements in NijFe are so close, the superlattice reflections are not easily detected. Furthermore, the domain configurations in NioFe are thought to be independent of the crystallographic orientations.

RNA polymerase: Preparation and structural analysis of helical polymers

1984 ◽  
Vol 42 ◽  
pp. 152-153
Author(s):  
E. Loren Buhle ◽  
Pamela Rew ◽  
Ueli Aebi
Keyword(s):  
Structural Analysis ◽  
Rna Polymerase ◽  
Molecular Level ◽  
X Ray Diffraction ◽  
Helical Polymers ◽  
X Ray ◽  
E Coli ◽  
The Past ◽  
Ordered Arrays ◽  
Low Ionic Strength

While DNA-dependent RNA polymerase represents one of the key enzymes involved in transcription and ultimately in gene expression in procaryotic and eucaryotic cells, little progress has been made towards elucidation of its 3-D structure at the molecular level over the past few years. This is mainly because to date no 3-D crystals suitable for X-ray diffraction analysis have been obtained with this rather large (MW ~500 kd) multi-subunit (α2ββ'ζ). As an alternative, we have been trying to form ordered arrays of RNA polymerase from E. coli suitable for structural analysis in the electron microscope combined with image processing. Here we report about helical polymers induced from holoenzyme (α2ββ'ζ) at low ionic strength with 5-7 mM MnCl2 (see Fig. 1a). The presence of the ζ-subunit (MW 86 kd) is required to form these polymers, since the core enzyme (α2ββ') does fail to assemble into such structures under these conditions.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

scholarly journals Measurements by x-ray diffraction of the temperature dependence of lattice parameter and crystallite size for isostatically-pressed graphite

Carbon Trends ◽  
2021 ◽  
pp. 100071
Author(s):  
Keith R. Hallam ◽  
James Edward Darnbrough ◽  
Charilaos Paraskevoulakos ◽  
Peter J. Heard ◽  
T. James Marrow ◽  
...  
Keyword(s):  
Temperature Dependence ◽  
Crystallite Size ◽  
Lattice Parameter ◽  
X Ray Diffraction ◽  
X Ray

scholarly journals Valorization of Byproducts of Hemp Multipurpose Crop: Short Non-Aligned Bast Fibers as a Source of Nanocellulose

Molecules ◽  
2021 ◽  
Vol 26 (16) ◽  
pp. 4723
Author(s):  
Sara Dalle Vacche ◽  
Vijayaletchumy Karunakaran ◽  
Alessia Patrucco ◽  
Marina Zoccola ◽  
Loreleï Douard ◽  
...  
Keyword(s):  
Infrared Spectroscopy ◽  
Thermogravimetric Analysis ◽  
Cannabis Sativa ◽  
Crystallinity Index ◽  
Residual Lignin ◽  
Chemical Pretreatment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Bast Fibers ◽  
Seed Maturity

Nanocellulose was extracted from short bast fibers, from hemp (Cannabis sativa L.) plants harvested at seed maturity, non-retted, and mechanically decorticated in a defibering apparatus, giving non-aligned fibers. A chemical pretreatment with NaOH and HCl allowed the removal of most of the non-cellulosic components of the fibers. No bleaching was performed. The chemically pretreated fibers were then refined in a beater and treated with a cellulase enzyme, followed by mechanical defibrillation in an ultrafine friction grinder. The fibers were characterized by microscopy, infrared spectroscopy, thermogravimetric analysis and X-ray diffraction after each step of the process to understand the evolution of their morphology and composition. The obtained nanocellulose suspension was composed of short nanofibrils with widths of 5–12 nm, stacks of nanofibrils with widths of 20–200 nm, and some larger fibers. The crystallinity index was found to increase from 74% for the raw fibers to 80% for the nanocellulose. The nanocellulose retained a yellowish color, indicating the presence of some residual lignin. The properties of the nanopaper prepared with the hemp nanocellulose were similar to those of nanopapers prepared with wood pulp-derived rod-like nanofibrils.

Local atomic structure in tetragonal pure ZrO2nanopowders

2010 ◽  
Vol 43 (2) ◽  
pp. 227-236 ◽  
Author(s):  
Leandro M. Acuña ◽  
Diego G. Lamas ◽  
Rodolfo O. Fuentes ◽  
Ismael O. Fábregas ◽  
Márcia C. A. Fantini ◽  
...  
Keyword(s):  
Tetragonal Phase ◽  
Local Structure ◽  
X Ray Diffraction ◽  
X Ray ◽  
Atomic Structures ◽  
Crystallite Sizes ◽  
Exafs Study ◽  
The Difference ◽  
X Ray Absorption ◽  
Good Agreement

The local atomic structures around the Zr atom of pure (undoped) ZrO2nanopowders with different average crystallite sizes, ranging from 7 to 40 nm, have been investigated. The nanopowders were synthesized by different wet-chemical routes, but all exhibit the high-temperature tetragonal phase stabilized at room temperature, as established by synchrotron radiation X-ray diffraction. The extended X-ray absorption fine structure (EXAFS) technique was applied to analyze the local structure around the Zr atoms. Several authors have studied this system using the EXAFS technique without obtaining a good agreement between crystallographic and EXAFS data. In this work, it is shown that the local structure of ZrO2nanopowders can be described by a model consisting of two oxygen subshells (4 + 4 atoms) with different Zr—O distances, in agreement with those independently determined by X-ray diffraction. However, the EXAFS study shows that the second oxygen subshell exhibits a Debye–Waller (DW) parameter much higher than that of the first oxygen subshell, a result that cannot be explained by the crystallographic model accepted for the tetragonal phase of zirconia-based materials. However, as proposed by other authors, the difference in the DW parameters between the two oxygen subshells around the Zr atoms can be explained by the existence of oxygen displacements perpendicular to thezdirection; these mainly affect the second oxygen subshell because of the directional character of the EXAFS DW parameter, in contradiction to the crystallographic value. It is also established that this model is similar to another model having three oxygen subshells, with a 4 + 2 + 2 distribution of atoms, with only one DW parameter for all oxygen subshells. Both models are in good agreement with the crystal structure determined by X-ray diffraction experiments.

Problems Associated with Kα Doublet in Residual Stress Measurements

1979 ◽  
Vol 23 ◽  
pp. 333-339
Author(s):  
S. K. Gupta ◽  
B. D. Cullity
Keyword(s):  
Residual Stress ◽  
Silicon Powder ◽  
Lattice Parameter ◽  
Diffraction Peak ◽  
Parameter Determination ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Techniques ◽  
The Difference ◽  
Similar Accuracy

Since the measurement of residual stress by X-ray diffraction techniques is dependent on the difference in angle of a diffraction peak maximum when the sample is examined consecutively with its surface at two different angles to the diffracting planes, it is important that these diffraction angles be obtained precisely, preferably with an accuracy of ± 0.01 deg. 2θ. Similar accuracy is desired in precise lattice parameter determination. In such measurements, it is imperative that the diffractometer be well-aligned. It is in the context of diffractometer alignment with the aid of a silicon powder standard free of residual stress that the diffraction peak analysis techniques described here have been developed, preparatory to residual stress determinations.

Sign in / Sign up

Export Citation Format

Share Document