scholarly journals Assessment of Groundwater Quality of Ilorin Metropolis using Water Quality Index Approach

1970 ◽  
Vol 12 (1) ◽  
pp. 18-21
Author(s):  
JA Olatunji ◽  
OA Odediran ◽  
RI Obaro ◽  
PI Olasehinde
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Chemical Properties ◽  
Total Hardness ◽  
Physico Chemical ◽  
Index Approach ◽  
Two Samples ◽  
Total Dissolved Solid

Groundwater as a source of potable water is becoming more important in Nigeria. Therefore, the need to ascertain the continuing potability of the sources cannot be over emphasised. This study is aimed at assessing the quality of selected groundwater samples from Ilorin metropolis, Nigeria, using the water quality index (WQI) method. Twenty two water samples were collected, 10 samples from boreholes and 12 samples from hand dug wells. All these were analysed for their physico – chemical properties. The parameters used for calculating the water quality index include the following: pH, total hardness, total dissolved solid, calcium, fluoride, iron, potassium, sulphate, nitrate and carbonate. The water quality index for the twenty two samples ranged from 0.66 to 756.02 with an average of 80.77. Two of the samples exceeded 100, which is the upper limit for safe drinking water. The high values of WQI from the sampling locations are observed to be due to higher values of iron and fluoride. This study reveals that the investigated groundwaters are mostly potable and can be consumed without treatment. Nonetheless, the sources identified to be unsafe should be treated before consumption.KEYWORDS: groundwater, water quality index, potability, physico - chemical, parameter

scholarly journals Assessment of the Quality of Well Dug Water Samples in Nigeria and Their Suitability for Drinking and Irrigation Purposes

2021 ◽  
Author(s):  
Samuel Dare Oluwagbayide ◽  
Francis Olawale Abulude
Keyword(s):  
Water Quality ◽  
Water Samples ◽  
Water Quality Index ◽  
Quality Index ◽  
Total Hardness ◽  
Chemical Parameters ◽  
Drinking And Irrigation ◽  
Physico Chemical

Abstract The quality of well-dug water for drinking and irrigation purposes must be measured as part of a sustainable groundwater analysis. The study aimed to assess water quality and to evaluate their usefulness for drinking and irrigation, using the Drinking Water Quality Index (DWQI) and Irrigation Water Quality Index (IWQI). To achieve this, standard methods were used for the determination of physicochemical parameters of the water samples, while using models (ESP, SSP, SAR, MAR, KR, TDS, and EC) to ascertain their suitability for drinking and irrigation. According to the findings, the determined Physico-chemical parameters were compared to standard limits and found desirable because they were within the guidelines. Low pH (6.4-7), total dissolved solids (106–130 mg/L), total hardness (42–56 mg/L), calcium (3.5–8.3 mg/L), magnesium (1.13.6 mg/L), nitrate (4.6–16 mg/L), chloride (1.8–3.1), and sulphate (14–15. mg/L) in the well samples were found to be the key cause of the low DWQI and IWQI value at these sites. The results also depicted that all the water samples are of exceptional quality (excellent).

scholarly journals Evaluation the water quality of the potable water network in Al-Shuala/ Baghdad City

2019 ◽  
Vol 13 (28) ◽  
pp. 116-124
Author(s):  
Zainab Bahaa Mohammed
Keyword(s):  
Heavy Metals ◽  
Water Quality ◽  
Drinking Water ◽  
Quality Index ◽  
Potable Water ◽  
Total Hardness ◽  
Water Network ◽  
Conductivity Water ◽  
Total Dissolved Solid

In this research, the water quality of the potable water network inAl-Shuala Baghdad city were evaluated and compare them with theIraqi standards (IQS) for drinking water and World HealthOrganization standards (WHO), then water quality index (WQI) werecalculator: pH, heavy metals (lead, cadmium and iron), chlorides,total hardness, turbidity, dissolved oxygen, total dissolved solid andelectrical conductivity. Water samples are collected weekly duringthe period from February 2015 to April 2015 from ten sites. Resultsshow that the chlorides, total dissolved solid and electricalconductivity less than acceptable limit of standards, but totalhardness and heavy metals in some samples higher than acceptablelimit of standards while the other parameter is good.WQI shows thatresults is excellent and good for drinking for all location and monthsexcept site (2) gave higher value (65.184) in March and site (9) gavehigh value (57.78, 57.23) at March and April indicate that sites ispoor for drinking water.

scholarly journals Irrigation groundwater quality based on hydrochemical analysis of Nandgaon block, Nashik district in Maharashtra

2017 ◽  
Vol 5 (1) ◽  
pp. 1 ◽  
Author(s):  
Kailash Aher ◽  
Sharad Gaikwad
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Irrigation Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Shallow Aquifer ◽  
Total Hardness ◽  
Irrigation Water Quality ◽  
Irrigation Water Quality Index

To identify the sources and quality of groundwater, the water samples were collected from 52 dug wells irrigation water in an area of 1089.82km2 and were analyses for pH, Conductivity, total dissolved solids, Calcium, Magnesium, Sodium, potassium, total hardness, Alkalinity (CO32−, HCO3−), sulphate, chloride, nitrate and fluoride to understand the (irrigation water quality index ) IWQI, The         secondary parameters of irrigation groundwater quality indices such as Sodium adsorption ratio (SAR), Residual sodium carbonate (RSC), Kelley’s ratio (KR), Sodium soluble percent (SSP), Permeability index (PI),Magnesium adsorption ratio (MAR),and CRI       (Corrosively ratio index) were calculated from the primary parameter for irrigation water quality index (IWQI). The IWQI was classified into excellent to unfit condition of groundwater quality based on their Water Quality Index (WQI). The IWQI (88%+12%) indicate that slightly unsustainable to good quality of ground water. But due to this quality deterioration of shallow aquifer, an immediate attestation requires for sustainable development.

scholarly journals Water Quality Index (WQI) Approach to Evaluate the Water Quality of Certain Tank Waters of Tiptur Taluk in Tumkur District, Karnataka, India

2015 ◽  
Vol 10 (1) ◽  
pp. 189-198
Author(s):  
A Shivanna ◽  
G Nagendrappa
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Poor Quality ◽  
The Public ◽  
Run Off ◽  
Physico Chemical ◽  
Investigation Period ◽  
The Impact

Evaluation of water quality using different parameters is complex and not easy to understand as it is variable by variable discussion. Water quality index is a single value indicator used to evaluate and present the water quality to the public and the related management in precise and understandable manner. Measured values of eleven physico-chemical parameters namely, pH, TDS, TH, Cl-,NO3-,SO42-,HCO3-, Ca2+, Mg2+, Na+ and K+ were used to calculate WQI of six tanks in Tiptur taluk. The study was taken up to understand the impact of agriculture run off from the respective catchment area, domestic sewage input and human activities which contribute to pollution load. During the investigation period from December-2010 to November-2012, it was found that the overall water quality index of the studied tanks ranged from 46.72 to 92.22 indicating the quality ranging from good quality to very poor quality. Values of variables TDS, HCO3-, Na+ and K+exceeded their desirable limits of BIS/ICMR in Karadi, Halkurke and Honnavalli tanks which depend on rain water. Waters in these tanks were of moderately poor to very poor quality. Waters of Canal fed tanks were of good to moderately poor quality.

Suitability Assessment of Groundwater Quality for Drinking Purpose by Physicochemical Characterization and Water Quality Index from Haveli Region, India

2019 ◽  
Vol 2 (2) ◽  
pp. 83-90 ◽  
Author(s):  
Smitarani Lad ◽  
Swati Mukherjee ◽  
Bhavana Umrikar
Keyword(s):  
Water Quality ◽  
Groundwater Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Physicochemical Characterization ◽  
Total Hardness ◽  
Prime Concern ◽  
The Impact ◽  
Drinking Purpose

The emulsification of major constituents in groundwater is accentuated to highlight the impact that is anticipated to be the prime concern due to depleting quality of this resource used for drinking purpose. In view of this, 53 groundwater samples of dug wells taping basaltic water table aquifer located in Haveli taluka adjoining Pune city of Maharashtra, India were collected and analyzed for major cations and anions to evaluate the suitability using water quality index (WQI). The parameters such as pH, Total Hardness (TH), Sodium (Na) and Sulphate (SO4) were assigned with weight 5 and the weight 1 considered as lowest level was assigned to Calcium (Ca++), Magnesium (Mg++), Potassium (K+), Carbonate (CO3--), Bicarbonate (HCO3-) and Phosphate (PO4) and observations were made to know the groundwater quality of the study area. Using these values, the WQI was calculated that revealed according to BIS standards 57% of samples falls in good category, and 43% samples in poor category, while according to WHO standards 38%, 57%, 6% were representing excellent, good and poor category, respectively.

scholarly journals Assessment of heavy metal and physico-chemical pollution loadings of River Benue water at Makurdi using water quality index (WQI) and multivariate statistics

2021 ◽  
Vol 11 (7) ◽  
Author(s):  
Raphael Terungwa Iwar ◽  
Joseph Terlumun Utsev ◽  
Martina Hassan
Keyword(s):  
Water Quality ◽  
Heavy Metal ◽  
Water Quality Index ◽  
Quality Index ◽  
Dry Season ◽  
Pollution Monitoring ◽  
Total Variance ◽  
Wet Season ◽  
Physico Chemical

AbstractIn this work, the quality of River Benue water at Makurdi was assessed for its heavy metal load alongside seven other physico-chemical parameters using water quality index (WQI) and multivariate statistical tools. A total of 45 samples from three (3) different points along the River course were collected for five months (October 2018–May, 2019) spanning the dry and wet seasons. Samples were analysed  in accordance with standard methods. Most of the parameters evaluated were found to fall in the allowable limits of the World Health Organization (WHO) among others, except for colour, turbidity, total suspended solids, nickel, lead and cadmium. WQI analysis using the BISWQI, OWQI and CCMEWQI indicated that all indexing methods were suitable for estimating the WQI of River Benue as they all showed that the water corresponded to the classification as “poor water”. Heavy metal index of the river ranged from13.40–6080.00 and from 47.07–7240.00 for the dry and wet seasons, respectively, and was majorly influenced by high cadmium and lead pollution levels. Principal component analysis (PCA) revealed three rotated factor with respective communality levels for both the dry and wet seasons. Factor 1 was positively loaded with nine parameters which accounted for 32.3% of the total variance during the dry season, while it was positively loaded with 10 parameters in the wet season accounting for 25.9% of total variance. Hierarchical cluster analysis (HCA) revealed that the river was zoned into four clusters each for both dry and wet seasons. Sampling points 2 and 3 were the most polluted during the dry season, while sampling point 1 was found to be the most polluted in the wet season. It was concluded that the increasing and diverse nature of anthropogenic activities on the river course was responsible for the deteriorating quality of the water. The study recommended continuous pollution monitoring and local regulations to reduce the entrance of both diffuse and point source pollution into the river.

scholarly journals Physico-chemical and microbiological characterization of the ground water across the city Bareilly (U.P.), India

2011 ◽  
Vol 3 (2) ◽  
pp. 315-318
Author(s):  
D. R. Khanna ◽  
Shivom Singh ◽  
Neetu Saxena ◽  
R. Bhutiani ◽  
Gagan Matta ◽  
...  
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Underground Water ◽  
Total Hardness ◽  
Average Value ◽  
Physico Chemical ◽  
The City

The drinking water quality (underground water) of Bareilly city has been assessed by estimating physicochemical parameters and calculating Water Quality Index (WQI). Water Quality Index plays an important role in interpreting the information on water quality. The WQI of different sites shows that drinking water is of good quality. The correlation between different parameters was also estimated. During course of study the average value of physico-chemical parameters studied were observed as temperature 20.17 o C, turbidity 2.17 NTU, pH 8.13, electrical conductivity 1360 mmhos/cm, total dissolved solids 1218.9 mg/l, total hardness 515.0 mg/l chlorides 106.34 mg/l, alkalinity 342.15, fluorides 0.44 mg/l, sulphates 84.68 mg/l, nitrates 22.83 mg/l, DO 2.44 mg/l, BOD 1.26 mg/l. While average MPN were observed as 5.66 and average WQI as 21.48.

scholarly journals Pre-Post Monsoon Assessment of Ground Water of Ghot Village in Gadchiroli District

2019 ◽  
Vol 8 (4) ◽  
pp. 3444-3448
Keyword(s):  
Water Quality ◽  
Drinking Water ◽  
Water Quality Index ◽  
Quality Index ◽  
Water Source ◽  
Threshold Value ◽  
World Health ◽  
Total Hardness ◽  
Drinking Water Source

there basic need of human being that is food, shelter and Cloth. So as In food water is very important after air, around 72% of earth surface is covered with water but among them only few percentage of source are available for drinking and other domestic purposed. Sub-Surface water is one of the most priceless naturally occurring things which balance human health and development of ecology. In this research find out safe drinking water source in Ghot village of Gadchiroli district. Also find determine chipset filtration process required other drinking water sources so that people from Ghot village are easily use this water for drinking and domestic purposed. With the help of sample analysis from different location of Ghot village are tested in laboratory and check with BIS and WHO standards. Water quality guidelines provide a threshold value for each parameter for drinking water. It is necessary that the quality of drinking water should be checked at regular time intervals, because due to the use of contaminated drinking water, the human population suffers from various water borne diseases. There are some parameters of drinking water quality parameters like World Health Organization (WHO) and Indian Standard IS 12500: 2012. The objectives of this study are to analyses the underground water quality of Ghot Village of Gadchiroli region by water quality index. In this research 11 sample point location were selected on five parameter which are essential for check for quality. Physico-chemical parameters such as PH, Turbidity, Total Hardness, Fluoride and Total Dissolved Solids collected different place like boar well, pond, River etc. In this study find out the range of water quality index so that treatment on water can be perform properly on respective drinking water source

Water Quality Index, a Useful Tool for Evaluation of Danube River Raw Water

2017 ◽  
Vol 68 (8) ◽  
pp. 1732-1739 ◽  
Author(s):  
Iuliana Paun ◽  
Florentina Laura Chiriac ◽  
Nicoleta Mirela Marin ◽  
Liliana Valeria Cruceru ◽  
Luoana Florentina Pascu ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Quality Index ◽  
Quality Index ◽  
Danube River ◽  
Quality Of Water ◽  
Physico Chemical ◽  
Water Quality Classification ◽  
Canadian Council ◽  
Ccme Wqi

The Danube River is the major source of drinking water supply for the cities in the southern part of Romania. The study was a descriptive-analytical one and lasted for 9 month. Samples were taken monthly between March 2016 and November 2016. Six sampling sites were selected to evaluate the spatial and temporal changes of water quality along the river. The samples were analyzed based on the standard methods for the following parameters: pH, conductivity (EC), NH4+, NO3-, Cl -, suspended solids, PO43-, SO42-, metals (Fe, Cd, Cr, Pb, Ni, Hg, As, Zn, Cu, Mn). The obtained values were compared with those imposed by the Romanian environmental legislation. An efficient and simplified method to express the quality of water used for consumption is provided by the Water Quality Index (WQI). WQI reflects the quality of water in a single value by comparing data obtained from the investigation of a number of physico-chemical parameters to the existing limits. The evaluation of water quality was performed using the Water Quality Index of the Canadian Council of Ministries of the Environment (CCME WQI). Water quality indices were classified as: excellent, good, medium, bad and very bad. The results indicated the water quality classification as �good� in all six sampling selected sites.

Suitability of Water for Drinking and Irrigation Use Using Water Quality Index and GIS

Agropedology ◽  
2019 ◽  
Vol 29 (1) ◽  
Author(s):  
V. T. Shinde ◽  
◽  
M. Singh ◽  
S. B. Nandgude ◽  
N. Varshney ◽  
...  
Keyword(s):  
Water Quality ◽  
Water Samples ◽  
Water Quality Index ◽  
Quality Index ◽  
Chemical Properties ◽  
Surface Water Quality ◽  
Gujarat State ◽  
Drinking And Irrigation ◽  
Physico Chemical ◽  
The Us

The present study highlights techniques to identify suitability of water for drinking and irrigation uses. Twenty water samples from Dang district of Gujarat state were collected in pre-monsoon (PRM) and post-monsoon (POM) seasons and analyzed for different physico-chemical properties. The Water Quality Index varied from 37.83 to 121.68 in PRM season and from 40.09 to 152.83 in POM season. Surface water quality in the Dang district was good for drinking in 58.43 % and 64.43 % area in PRM and POM season, respectively. The US Salinity diagram showed that most of the water samples belong to the categories C2S1 and C2S2 (suitable class for irrigation) in both the seasons. Some samples falling in the category C3S2 are also acceptable for irrigation use in both the seasons.

Sign in / Sign up

Export Citation Format

Share Document