scholarly journals TRANSILLUMINATION OF THE DENSE PLASMA BARRIER BY THE STRONG BEAM OF ELECTROMAGNETIC WAVES: COMPUTER SIMULATION

2020 ◽  
pp. 64-68
Author(s):  
B.R. Mykhailenko ◽  
I.O. Anisimov
Keyword(s):  
Computer Simulation ◽  
Electromagnetic Wave ◽  
Software Package ◽  
Electromagnetic Waves ◽  
Dense Plasma ◽  
Wave Beam ◽  
Incident Beam ◽  
Strong Electromagnetic Wave ◽  
Higher Power ◽  
Simulation Results

Transillumination of a dense plasma barrier by a strong electromagnetic wave beam has been studied via simulation using the PIConGPU software package. Formation of the channel with reduced plasma density, predicted theoretically and detected experimentally, was observed. For a higher power incident beam, plasma turbulent dynamics has been observed, which leads to its "fast" transillumination. The simulation results didn’t confirm the theoretically proposed mechanisms of "fast" transillumination.

scholarly journals Excitation of ion wakefields by electromagnetic pulses in dense plasmas

2009 ◽  
Vol 75 (1) ◽  
pp. 15-18 ◽  
Author(s):  
P. K. SHUKLA
Keyword(s):  
Wave Equation ◽  
Electromagnetic Wave ◽  
Electromagnetic Waves ◽  
Electromagnetic Pulse ◽  
Dense Plasma ◽  
Ponderomotive Force ◽  
Electromagnetic Pulses ◽  
Dense Plasmas ◽  
High Energies

AbstractThe excitation of electrostatic ion wakefields by electromagnetic pulses in a very dense plasma is considered. For this purpose, a wave equation for the ion wakefield in the presence of the ponderomotive force of the electromagnetic waves is obtained. Choosing a typical profile for the electromagnetic pulse, the form of the ion wakefields is deduced. The electromagnetic wave-generated ion wakefields can trap protons and accelerate them to high energies in dense plasmas.

scholarly journals Numerical simulation of aerodynamic properties of separable elements of space-rocket systems in the LOGOS software package

2021 ◽  
Vol 2099 (1) ◽  
pp. 012072
Author(s):  
S V Aksenov ◽  
D A Korchazhkin ◽  
A Yu Puzan ◽  
O A Puzan
Keyword(s):  
Numerical Simulation ◽  
Computer Simulation ◽  
Software Package ◽  
Reference Data ◽  
Verification And Validation ◽  
Aerodynamic Properties ◽  
Space Rocket ◽  
Simulation Results

Abstract The work describes simulation results of the aerodynamic properties of split elements of the space-rocket systems in the LOGOS software package: the review of the advanced methods for aerodynamic properties has been carried out, the advantages of the computer simulation when solving such problems were demonstrated, verification and validation computations of the simulation problems for the split elements were performed, the produced results were compared with the reference data from available publications. The analysis of the results confirmed the applicability of the LOGOS software package for computing aerodynamic properties of the split elements.

scholarly journals TO THE PROBLEM OF DETERMINING THE COEFFICIENT OF THERMAL EXPANSION OF MATERIALS

2020 ◽  
pp. 284-292
Author(s):  
Денис Васильевич Пьянзин ◽  
Николай Александрович Панькин ◽  
Александр Николаевич Чалдышкин ◽  
Николай Иванович Чистяков
Keyword(s):  
Experimental Data ◽  
Experimental Study ◽  
Computer Simulation ◽  
Thermal Expansion ◽  
Software Package ◽  
Coefficient Of Thermal Expansion ◽  
Metallic Materials ◽  
Ansys Software ◽  
Simulation Results ◽  
Good Agreement

Проведено экспериментальное исследование и компьютерное моделирование в программном комплексе ANSYS термического воздействия на металлический материал. Отмечается уменьшение значений коэффициента теплового расширения при увеличении скорости нагрева образца. Показано, что данное поведение обусловлено наличием градиента температур между его центральной и поверхностью частями. Отмечается хорошее согласие результатов компьютерного моделирования с соответствующими экспериментальными данными. Значения коэффициента теплового расширения близки к истинным, которые были определены при малых скоростях нагрева/охлаждения или при длительной выдержке образца при конечной и начальной температурах. Результаты моделирования в ANSYS могут быть использованы при интерпретации и прогнозировании тепловых свойств металлических материалов. An experimental study and computer modeling in the ANSYS software package of the thermal effect on a metal material was carried out. A decrease in the values of the coefficient of the thermal expansion is noted with an increase in the heating rate of the sample. It is shown that this behavior is due to the presence of the temperature gradient between its central and surface parts. Good agreement of the results of computer simulation with the corresponding experimental data is found. The values of the coefficient of thermal expansion are close to true ones determined at low heating / cooling rates or with long exposure of the sample at the final and initial temperatures. The simulation results in ANSYS can be used to interpret and predict thermal properties of metallic materials.

Detection of delamination in composites by using electromagnetic penetrating radar

2014 ◽  
Vol 5 (2) ◽  
pp. 151-156
Author(s):  
Z. Mechbal ◽  
A. Khamlichi
Keyword(s):  
Electromagnetic Wave ◽  
Electromagnetic Waves ◽  
Electromagnetic Wave Propagation ◽  
Wave Reflection ◽  
Image Features ◽  
Partial Reflection ◽  
Straight Path ◽  
Reflected Signal ◽  
Short Time ◽  
Intervening Factors

Composites made from E-glass/epoxy or aramid/epoxy are frequently used in aircraft and aerospace industries. These materials are prone to suffer from the presence of delamination, which can reduce severely the performance of aircrafts and even threaten their safety. Since electric conductivity of these composites is rather small, they can propagate electromagnetic waves. Detection of delamination damage can then be monitored by using an electromagnetic penetrating radar scanner, which consists of emitting waves having the form of short time pulses that are centered on a given work frequency. While propagating, these waves undergo partial reflection when running into an obstacle or a material discontinuity. Habitually, the radar is moved at constant speed along a straight path and the reflected signal is processed as a radargram that gives the reflected energy as function of the two-way time and the antenna position.In this work, modeling of electromagnetic wave propagation in composites made from E-glass/epoxy was performed analytically. The electromagnetic wave reflection from a delamination defect was analyzed as function of key intervening factors which include the defect extent and depth, as well as the work frequency. Various simulations were performed and the obtained results have enabled to correlate the reflection pattern image features to the actual delamination defect characteristics which can provide quantification of delamination.

SIMULATION OF SOFT START OF SYNCHRONOUS ELECTRIC DRIVES

2019 ◽  
Author(s):  
Shakhboz Dadabaev
Keyword(s):  
Computer Simulation ◽  
Electric Drive ◽  
Water Supply Systems ◽  
Factors Affecting ◽  
Electric Drives ◽  
Soft Start ◽  
Simulation Results ◽  
Pumping Units ◽  
Negative Factors ◽  
Supply Systems

The main negative factors affecting the starting modes of synchronous electric drives of pumping units of irrigation water supply systems were identified, computer simulation of direct and soft start of synchronous electric drive was made, the simulation results are shown in graphs and a brief conclusion was made on the study.

Computer simulation to evaluate the economics of landfill gas recovery

1998 ◽  
Vol 38 (2) ◽  
pp. 201-208
Author(s):  
M. W. Milke
Keyword(s):  
Computer Simulation ◽  
Computer Program ◽  
Landfill Gas ◽  
Base Case ◽  
Simulation Tool ◽  
Hypothetical Case ◽  
Gas Recovery ◽  
Fixed Set ◽  
Key Variables ◽  
Simulation Results

A need exists for tools to improve evaluations of the economics of landfill gas recovery. A computer simulation tool is presented. It uses a spreadsheet computer program to calculate the economics for a fixed set of inputs, and a simulation program to consider variations in the inputs. The method calculates the methane generated each year, and estimates the costs and incomes associated with the recovery and sale of the gas. Base case results are presented for a city of 500,000. An uncertainty analysis for a hypothetical case is presented. The simulation results can help an analyst see the key variables affecting the economics of a project.

New Approach to the Theory of Circular Dichroism

1998 ◽  
Vol 63 (8) ◽  
pp. 1187-1201 ◽  
Author(s):  
Jaroslav Zamastil ◽  
Lubomír Skála ◽  
Petr Pančoška ◽  
Oldřich Bílek
Keyword(s):  
Electromagnetic Wave ◽  
Circular Dichroism ◽  
Electromagnetic Waves ◽  
Maxwell Equations ◽  
Optically Active ◽  
Semiclassical Approach ◽  
New Approach ◽  
Isotropic Media ◽  
New Formula ◽  
Circular Dichroïsm

Using the semiclassical approach for the description of the propagation of the electromagnetic waves in optically active isotropic media we derive a new formula for the circular dichroism parameter. The theory is based on the idea of the time damped electromagnetic wave interacting with the molecules of the sample. In this theory, the Lambert-Beer law need not be taken as an empirical law, however, it follows naturally from the requirement that the electromagnetic wave obeys the Maxwell equations.

Sign in / Sign up

Export Citation Format

Share Document