scholarly journals Evaluation of bioactive glass and hydroxyapatite crystals as pulpotomy agents in primary molars: A clinical study

2020 ◽  
Vol 1 (1) ◽  
pp. 42-51
Author(s):  
Neeraja Govindaraj ◽  
◽  
Kinjal Shah ◽  
Priya Subramaniam ◽  
Megha Gupta ◽  
...  

Aim: To clinically and radiographically evaluate the potential of bioactive glass and hydroxyapatite crystals as pulpotomy agents in primary molars. Methods: A total of fifty teeth were selected from 25 children (14 boys and 11 girls) aged 4 to 9 years, who had no medical condition that would contraindicate pulp therapy. Each child had at least two primary molars (first and/or second primary molar) requiring pulpotomy. A conventional pulpotomy procedure was performed on the selected teeth using bioactive glass and hydroxyapatite crystals. All molars were evaluated clinically and radiographically at regular intervals over 12 months. The results were subjected to statistical analysis using Fischer exact test. Results: One hundred percent clinical success and 84% radiographic success was observed in both the groups at the end of the study period. Conclusions: The study concluded that both bioactive glass and hydroxyapatite crystals can be used as pulpotomy agents in primary molars.

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Zahra Bahrololoomi ◽  
Fatemeh Zarebidoki ◽  
Atefeh Shakib

Objective: The aim of this study was to compare the clinical and radiographic success rates of pulpotomy in primary molars using formocresol versus sodium hypochlorite.Methods:  Twenty-three children aged 4-9 years with at least two primary molars requiring pulpotomy were randomly allocated into two groups. All teeth received stainless steel crown after conventional pulpotomy procedure with either NaOCl or formocresol. Clinical and radiographic signs/symptoms were recorded at six and 12 months. Outcomes were statistically analyzed using Fisher’s exact test and Chi-squaretest.Results: Clinical success rates at 6 and 12-month follow-up in both groups was 100%. At 6-month follow-up, radiographic success rate for NaOCl and formocresol groups was 100%. At 12-month recalls, in NaOCl group, 20 teeth (87%) and in formocresol group, 21 teeth (91.3%) had radiographic success. No significant difference was found in the radiographic success rates at 12 months (P=1.00). Internal root resorption was the most common radiographic pathologic finding in both groups.Conclusion:Clinical and radiographic success rates in NaOCl group was comparable with formocresol group, so NaOCL can be suggested as an alternative for primary teeth pulpotomies. However further clinical studies with long-term follow-ups are needed. 


2014 ◽  
Vol 38 (4) ◽  
pp. 349-354 ◽  
Author(s):  
K Cantekin ◽  
H Gumus

Objective: The present study determined whether primary molar pulpotomies showed equal in vitro and clinical success when restored with sandwich restoration with a bulk-fill flowable composite (BFRBC) liner versus a stainless steel crown (SSC) restoration. Study design: Sixty extracted human primary second molars with proximo-occlusal cavities were selected for in vitro test. The specimens were randomly divided into three groups (n = 20) and restored with sandwich restoration with a BFRBC liner, composite (RBC) restoration and SSC. In addition, sixty teeth were selected from 20 children and each child had at least three primary molars (first and/or second primary molar) requiring pulpotomy. The patients were recalled for clinical and radiographic evaluation at approximately 6- and 12-month intervals. Results: The SSC restoration had significantly higher microleakage than the others. Although there was a significant difference between the RBC and the SSC (P = 0.02), the differences between the BFRBC and the RBC, as well as between the BFRBC and the SSC, were not statistically significant at the 12-month radiographic evaluation (P = 0.33 and P = 0.11, respectively). Conclusion: In laboratory conditions, sandwich restoration with BFRBC liner showed a superior seal margins of pulpotomized primary molars. Based clinical and radiographical evaluation, teeth treated with formocresol pulpotomy and restored with sandwich restoration with BFRBC liner were as successful as those restored with a SSC.


Author(s):  
F. S. Ayupova ◽  
S. N. Alekseenko ◽  
V. Ya. Zobenko ◽  
T. V. Gayvoronskaya

Relevance. To study the incidence of different types of resorption of multirooted primary teeth, to specify indications for deciduous molar extraction to prevent eruption abnormalities of permanent posterior teeth in mixed dentition.Materials and methods. Root resorption of 375 multirooted primary teeth (166 first primary molars and 209 second primary molars) was studied on panoramic X-rays of 60 children (30 girls and 30 boys) aged between 7 and 15. Illustrated classification by T.F. Vinogradova (1967) improved by authors was used to determine type and degree of root resorption of multi-rooted primary teeth. Received data were described with absolute values of number of cases and percentage. Chi-square was used to detect differences in sign incidence rate between groups, p<0.05 was considered statistically significant.Results. There were no statistically significant gender differences (p>0,05) in type and degree of root resorption of multirooted primary teeth. Type A resorption prevailed and constituted 53.3% of all primary molars. Disturbances in root resorption of multirooted primary teeth in mixed dentition were related to health condition of primary teeth. Transition of even resorption to unven was considered a risk factor of delayed eruption and aberrant position of permanent teeth, and indication for extraction of a primary molar in question. Conclusions. 1) Even root resorption (type A) was detected in 53.3% of primary molars in mixed dentition by orthopantomography. 2) Transition from even resorption of primary molar roots to uneven resorption was associated with eruption deviations and delayed premolar eruption. 3) Timely extraction of primary molars with uneven root resorption facilitated correct eruption of premolars and increased effectiveness of secondary prevention of malocclusion in children.


2020 ◽  
Vol 2 (1) ◽  
pp. 36-44
Author(s):  
Satyawan G. Damle ◽  
Ritika Bansal ◽  
Dhanashree D. Sakhare

Objective: To compare the success rate of different obturation procedures in primary mandibular second molars clinically and also by digital radiovisiography. Methods: A total of 40 children aged between 4-8 years with deeply carious mandibular second primary molars indicated for single session pulpectomy were selected. Canals were obturated with Metapex. The 3 study groups (Endodontic plugger, Handheld lentulospiral, Navi Tip syringe) were compared with the control group (reamer) both clinically and radiovisiographically. The data collected were statistically analyzed using Pearson’s Chi-square and Fisher’s exact test. Results: The use of Navi tip syringe led to the least number of voids followed by Endodontic plugger and Reamer and the highest number of voids was reported with Lentulospiral. Navitip presented maximum number of optimally filled cases followed by Endodontic plugger and Lentulospiral and least number of optimally filled cases with reamer. However, there was no statistically significant difference (p>0.05) in any of the groups with clinical (pain and tenderness to percussion) and radiographic parameters (presence or absence of voids and length of obturation). Conclusion: Within the limitations of the present study, though the clinical outcome was statistically insignificant, Navitip syringe exhibited encouraging results and is a promising option for obturation in primary teeth.


2018 ◽  
Vol 42 (1) ◽  
pp. 21-26 ◽  
Author(s):  
Attiguppe Ramasetty Prabhakar ◽  
Kratika Dixit ◽  
OS Raju

Objective: PTFE tape, which is commonly used as plumber's tape is an inorganic, non-fibrous, ribbon like material. The aim of this study was to evaluate PTFE tape as endodontic spacer material and to compare it with commonly used spacer material that is cotton, in primary teeth. Study Design: Seventeen children undergoing pulpectomy of lower second primary molar bilaterally were included in the study. Cotton and PTFE tape were placed as spacers on each side randomly. Samples were taken from the access cavity at baseline and after seven days to check for microbial leakage. Spacer materials were also checked for microbial contamination. Results: The results revealed that there was a significant increase in the bacterial colony count after seven days in cotton group. The access cavities were also positive for microbial leakage in the cotton group where the spacers showed positive growth. In PTFE group only two samples showed microbial contamination of spacer and out of two only one sample showed contamination of access cavity along with spacer. Conclusion: Within the limitations of this study, it can be concluded that PTFE tape performed better than cotton as endodontic spacer material. Thus, PTFE tape can be recommended as an endodontic spacer material as an alternative to cotton in primary teeth.


2012 ◽  
Vol 19 (2) ◽  
Author(s):  
Sawkar Vijay Pramod ◽  
Suwandi Sugandi ◽  
Aaron Tigor Sihombing ◽  
Marselina Tan

Objective: To determine the abnormality of spermatozoa in the contralateral epididymis after unilateral testicular torsion. Material & method: Twenty wistar rats were divided into two groups i.e. Group B (sham procedure) Group A (torsio and orchiectomy 24 hours later), and contralateral epididymectomy was performed a month later. Spermatozoa in the contralateral epididymis are extracted and analyzed by an experienced biologist. Data were analyzed using Chi-square or Fischer exact test. Results: Sperm morphology changes in group B is higher than Group A (6,6% vs 0,5%, p = 0,009). Conclusion: Unilateral testicular torsion causes sperm abnormal morphology in the contralateral epididymis. Keywords: Unilateral testicular torsion, contralateral epididimal spermatozoa.


2020 ◽  
pp. 1-4
Author(s):  
Prabudh Goel ◽  
◽  
Jile Dar Rawat ◽  
Piyush Kumar ◽  
◽  
...  

Objective: To describe the ‘Bird-Winged Coronal-Collar Skin re-arrangement modification’ of the Tubularized Incised Plate (TIP) urethroplasty to preserve the inner preputial skin on the ventral surface of the penile shaft. Material and Method: Study Group: Prospective review of the results of a single surgeon with Bird-Winged Coronal-Collar skin re-arrangement modification of TIP urethroplasty (n=111; mean age 4.9 years) of distal (n=76) and mid-penile (n-35) hypospadias (mean follow-up 37 months). Control Group: Retrospective review of a single surgeon’s results of distal and mid-penile hypospadias repair with standard TIP urethroplasty (2007-11). Outcome parameters (to compare non-inferiority of the modified technique): Urethro-cutaneous fistula (UCF) at voiding trial and follow-up at 3 months, wound infection, complete dehiscence, local edema, meatal stenosis and quality of urinary stream. Statistical analysis was done with the Fischer Exact Test. Results: With this technique, the authors could provide an inner preputial cover on the ventral/ ventro-lateral aspects of distal penile shaft in all but one patient (complete dehiscence). The results of ‘bird-winged coronal-collar skin re-arrangement’ modification were not-inferior/ comparable to those of standard TIP urethroplasty. Conclusions: The modification is technically feasible and reproducible and the overall results of urethroplasty were not inferior to the standard TIPS procedure.


2012 ◽  
Vol 37 (2) ◽  
pp. 143-147 ◽  
Author(s):  
P Airen ◽  
A Shigli ◽  
B Airen

Aim: The aim of the present study was to clinically and radiographically evaluate Mineral Trioxide Aggre-gate (MTA) as an agent for pulpotomy in primary teeth and to compare it with that of Formocresol (FC) pulpotomy. Method: Seventy first and second primary mandibular molars of children were chosen on patients who required minimum two pulpotomies in either arch or same arch. After the standardized technique of Pulpotomy with MTA and Formocresol, all molars were treated with a thick mix of Zinc oxide Eugenol cement into the coronal pulp chamber followed by preformed stainless steel crown. The children were followed up for clinical and radio graphical examination after 6,12 and 24 month for Pain, Swelling, Sinus/ fistula, Periapical changes, Furcation radiolucency and internal resorption. Results: MTA represents 97% clinical success rate in comparison to Formocresol with 85% success. Radiographically also MTA showed more promising results with 88.6% success in comparison to Formocresol with 54.3%. Conclusions: Thus, MTA pulpotomy has emerged as an easier line of treatment to save the premature loss of primary teeth due to caries or trauma.


2021 ◽  
pp. 21-34
Author(s):  
KL Girish Babu ◽  
◽  
Guraj Hebbar Kavyashree ◽  

Aim: To evaluate and compare the instrumentation time, obturation time, quality of obturation, and clinical and radiological success of pulpectomized teethfollowing root canal preparation of primary molars with rotary and manual file system. Methods: A total of 150 primary molars requiring pulpectomy were selected from children aged four to seven years. These teeth were divided into three groups of 50 teeth each. In Groups 1, 2, and 3, cleaning and shaping were carried out with Kedo-S pediatric rotaryfiles, HERO Shaper rotary files, and manual NiTi K-files, respectively. Obturation was carried out with zinc oxide eugenol cement and an engine-driven Lentulo spiral. The instrumentation and obturation times were recorded. A radiographic assessment of thequality of the root filling was carried out immediately after obturation. Finally, the pulpectomized teeth were clinically and radiographically evaluated over a two-year period. Results: The mean instrumentation times for Groups 1, 2, and 3 were 14.56 ± 2.89 min, 17.93 ± 3.51 min, and 29.00 ± 2.08 min, respectively. The mean obturation times for Groups 1, 2, and 3 were 8.11 ± 1.7 min, 7.93 ± 1.3 min, and 9.64 ± 17.61 min, respectively. The mean difference in the quality of obturation was not statistically significant in primary molars instrumented with Kedo-S pediatricand HERO Shaper rotary file systems (p = 0.16). However, this mean difference was significant when compared between primary molar instrumented with rotary file systems and manual NiTi files (p = <0.001). At two years, the clinical success rate was 100% and the radiological success rates were 95.3%, 97.9%, and 89.5% in Groups 1, 2, and 3, respectively. Conclusions: The rotary file systems took significantly less instrumentation and obturation time than the manual NiTi files. There were no significant differences in obturation quality or success rates after two years.


2017 ◽  
Vol 2017 ◽  
pp. 1-5
Author(s):  
Marco Pasini ◽  
Maria Rita Giuca ◽  
Roberto Gatto ◽  
Silvia Caruso

Aim. The aim of this retrospective study was to evaluate the clinical and radiographic success of pulpotomy on primary molars performed by dental students compared to that performed by an expert operator.Methods. The study was conducted on 142 second primary molars in 102 children. The patients were randomly selected from the available records. The test group (treated by dental students) included 51 subjects (28 males and 23 females, mean age:7.2±1) and the control group included 51 children (29 males and 22 females, mean age:7.4±1.2years). After pulpotomy, a clinical and radiographic evaluation after 12 months was performed. Chi-square test and odds ratio were calculated and significance level was set atp<0.05.Results. The success rate was significantly lower, 81.6% (p<0.05), in the test group than in the control group (93%). The test group showed less clinical and radiographic success (86% and 80%, resp.) compared to the control group (97.2% for clinical success and 93% for radiographic success).Conclusions. Pulpotomy with MTA is an effective method that ensures a good percentage of success. The clinical experience of the operator is a contributing factor.


Sign in / Sign up

Export Citation Format

Share Document