scholarly journals MOLECULAR MECHANISM OF RELAXATION ABSORPTION OF ULTRASONIC WAVES IN AN AQUEOUS SOLUTION OF CALCIUM ACETATE

InterConf ◽  
2021 ◽  
pp. 970-978
Author(s):  
Z. Nizomov ◽  
M. Asozoda ◽  
A. Olimi ◽  
A. Karimzoda
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Sodium Chloride ◽  
Sodium Acetate ◽  
Ultrasonic Waves ◽  
Calcium Acetate ◽  
Acetate Anion ◽  
Frequency Range ◽  
Calcium Cations ◽  
Calcium Cation

The absorption of ultrasonic waves in the frequency range from 6 to 146 MHz in aqueous solutions of sodium acetate, sodium chloride and calcium has been studied. It was found that only in solutions of calcium cations and acetate anion present simultaneously, relaxation absorption of ultrasonic waves is observed. The experimental data obtained indicate that the observed relaxation absorption of ultrasound in the studied frequency range by an aqueous solution of calcium acetate is associated with the interaction of the acetate anion with the calcium cation in the solution.

Ultrasonic Investigations of Inclusion Complexation of α-Cyclodextrin by DMSO in Pseudo-Binary Aqueous System

2015 ◽  
Vol 40 (4) ◽  
pp. 569-574
Author(s):  
Milena Kaczmarek-Klinowska ◽  
Tomasz Hornowski ◽  
Andrzej Skumiel ◽  
Monika Jażdżewska
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Heat Capacity ◽  
Inclusion Complexation ◽  
Adiabatic Compressibility ◽  
Resonance Method ◽  
Molecular Complexes ◽  
Aqueous System ◽  
Ultrasonic Waves ◽  
Stoichiometric Ratio

Abstract The paper reports the study of the complexation processes in aqueous solution of α-CD and DMSO. Cyclodextrins (CDs) (sometimes called cycloamyloses) are cyclic oligosaccharides formed by glucose units interconnected by α-(1,4) linkages; α-CD is one of three the most common CDs. It consists of six glucopyranose units. The speed of ultrasonic waves has been measured by the resonance method on ResoscanTM System apparatus. Some collateral data, such as density and heat capacity of the system, have also been measured. On the basis of the experimental data the excess adiabatic compressibility was determined. The extremes of the excess adiabatic compressibility function for different mixture compositions allowed us to establish the composition of molecular complexes formed in the solution. The obtained results suggest the formation of the α-CD with DMSO inclusion complexes with chemical stoichiometric ratio value of 1:1.

Utilization of Waste of Enzymes Biomass as Biosorbent for the Removal of Dyes from Aqueous Solution in Batch and Fluidized Bed Column

2020 ◽  
Vol 71 (1) ◽  
pp. 1-12
Author(s):  
Salman H. Abbas ◽  
Younis M. Younis ◽  
Mohammed K. Hussain ◽  
Firas Hashim Kamar ◽  
Gheorghe Nechifor ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Particle Size ◽  
Adsorption Capacity ◽  
Fluidized Bed ◽  
Flow Rate ◽  
Fungal Biomass ◽  
Solution Flow Rate ◽  
Maximum Adsorption Capacity ◽  
Solution Flow

The biosorption performance of both batch and liquid-solid fluidized bed operations of dead fungal biomass type (Agaricusbisporus ) for removal of methylene blue from aqueous solution was investigated. In batch system, the adsorption capacity and removal efficiency of dead fungal biomass were evaluated. In fluidized bed system, the experiments were conducted to study the effects of important parameters such as particle size (701-1400�m), initial dye concentration(10-100 mg/L), bed depth (5-15 cm) and solution flow rate (5-20 ml/min) on breakthrough curves. In batch method, the experimental data was modeled using several models (Langmuir,Freundlich, Temkin and Dubinin-Radushkviechmodels) to study equilibrium isotherms, the experimental data followed Langmuir model and the results showed that the maximum adsorption capacity obtained was (28.90, 24.15, 21.23 mg/g) at mean particle size (0.786, 0.935, 1.280 mm) respectively. In Fluidized-bed method, the results show that the total ion uptake and the overall capacity will be decreased with increasing flow rate and increased with increasing initial concentrations, bed depth and decreasing particle size.

Capillary flows and self-assembly of porous hydrate structures

2012 ◽  
Vol 9 (1) ◽  
pp. 22-25
Author(s):  
S.V. Amel’kin ◽  
D.Ye. Igoshin
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Self Assembly ◽  
Capillary Flow ◽  
Secondary Crystallization ◽  
Assembly Model ◽  
Physical Processes ◽  
Good Correspondence ◽  
Solution Formation ◽  
Capillary Flows

A self-assembly model for porous hydrate structures is proposed, which takes into account the sequence of basic physical processes: hydrate growth on the surface of the aqueous solution, formation of islet structure, capillary flow, separation and transfer of secondary crystallization nuclei to the meniscus. The model was studied within the cellular automata method. A good correspondence between the results of the simulation and the experimental data is obtained.

Modification of activated carbon using sodium acetate and its regeneration using sodium hydroxide for the adsorption of copper from aqueous solution

Carbon ◽  
2007 ◽  
Vol 45 (5) ◽  
pp. 1081-1084 ◽  
Author(s):  
Dan Mugisidi ◽  
Aria Ranaldo ◽  
Johny W. Soedarsono ◽  
Muhammad Hikam
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Sodium Hydroxide ◽  
Sodium Acetate

Separation of phenylenediamine isomers by using decamethylcucurbit[5]uril

2021 ◽  
Author(s):  
Long Cao ◽  
Han-Ling Guo ◽  
Rui Lian Lin ◽  
Li-Fei Tian ◽  
Zhi-Hua Zhang ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solution ◽  
Solid State ◽  
Phenylenediamine Isomers

Using multiple techniques, this work studied the binding behaviors of decamethylcucurbit[5]uril (Me10Q[5]) with o-, m- and p-phenylenediamine (PDA) isomers both in solid state and in aqueous solution. Experimental data indicate...

DETERMINATION OF TRACE AMOUNTS OF SILVER IN GALENA ORES

1960 ◽  
Vol 38 (9) ◽  
pp. 1488-1494 ◽  
Author(s):  
E. J. Bounsall ◽  
W. A. E. McBryde
Keyword(s):  
Aqueous Solution ◽  
Nitric Acid ◽  
Sodium Chloride ◽  
Hydrochloric Acid ◽  
Chloride Solution ◽  
Sodium Chloride Solution ◽  
Silver Content ◽  
Aqueous Sodium Chloride Solution ◽  
Aqueous Sodium

An analytical method is described for the determination of microgram amounts of silver in galena ores, based on the "reversion" of silver dithizonate. Silver is separated from relatively large amounts of lead by extraction as dithizonate into chloroform from an aqueous 1:99 nitric acid solution. Separation from mercury, which is also extracted under these conditions and would, if present, interfere in the analysis, is achieved by reverting the dithizonate solution with a 5% aqueous sodium chloride solution which is also 0.015 molar in hydrochloric acid. Following dilution of this aqueous solution and adjustment of pH, silver is again extracted into chloroform as the dithizonate, and determined absorptiometrically. Analyses of a number of galena ore samples showed a precision of within 3% for a silver content ranging from 0.03 to 0.4%.Some other methods for isolating silver from these samples, which were tried but found unsatisfactory, are discussed.

Sign in / Sign up

Export Citation Format

Share Document