scholarly journals Detecting regional variability in sources and sinks of carbon dioxide: a synthesis

2009 ◽  
Vol 6 (6) ◽  
pp. 1015-1026 ◽  
Author(s):  
A. J. Dolman ◽  
C. Gerbig ◽  
J. Noilhan ◽  
C. Sarrat ◽  
F. Miglietta
Keyword(s):  
Boundary Layer ◽  
Large Scale ◽  
Carbon Fluxes ◽  
Considerable Effort ◽  
Regional Variability ◽  
Data Set ◽  
Mesoscale Models ◽  
Boundary Layer Height ◽  
Inverse Models ◽  
Flux Measurements

Abstract. The current paper reviews the experimental setup of the CarboEurope Experimental Strategy (CERES) campaigns with the aim of providing an overview of the instrumentation used, the data-set and associated modelling. It then assesses progress in the field of regional observation and modelling of carbon fluxes, bringing the papers of this special issue into a somewhat broader context of analysis. Instrumental progress has been obtained in the field of remotely monitoring from tall towers and the experimental planning. Flux measurements from aircraft are now capable, within some constraints, to provide regular regional observations of fluxes of CO2, latent and sensible heat. Considerable effort still needs to be put into calibrating the surface schemes of models, as they have direct impact on the input of energy, moisture and carbon fluxes in the boundary layer. Overall, the mesoscale models appear to be capable of simulating the large scale dynamics of the region, but in the fine detail, like the precise horizontal and vertical CO2 field differences between the models still exist. These errors translate directly into transport uncertainty, when the forward simulations are used in inverse mode. Quantification of this uncertainty, including that of inadequate boundary layer height modelling, still remains a major challenge for state of the art mesoscale models. Progress in inverse models has been slow, but has shown that it is possible to estimate some of the errors involved, and that using the combination of observations. Overall, the capability to produce regional, high-resolution estimates of carbon exchange, exist in potential, but the routine application will require considerable effort, both in the experimental as in the modelling domain.

scholarly journals Study of a prototypical convective boundary layer observed during BLLAST: contributions by large-scale forcings

2014 ◽  
Vol 14 (13) ◽  
pp. 19247-19291 ◽  
Author(s):  
H. Pietersen ◽  
J. Vilà-Guerau de Arellano ◽  
P. Augustin ◽  
O. de Coster ◽  
H. Delbarre ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Large Scale ◽  
Surface Heterogeneity ◽  
Small Scale ◽  
Mountain Range ◽  
Convective Boundary ◽  
Good Correspondence ◽  
Data Set ◽  
Boundary Layer Height ◽  
Boundary Layer Dynamics

Abstract. We study the disturbances of CBL dynamics due to large-scale atmospheric contributions for a representative day observed during the Boundary Layer Late Afternoon and Sunset Turbulence (BLLAST) campaign. We first reproduce the observed boundary-layer dynamics by combining the Dutch Atmospheric Large-Eddy Simulation (DALES) model with a mixed-layer theory based model. We find that by only taking surface and entrainment fluxes into account, the boundary-layer height is overestimated by 70%. If we constrain our numerical experiments with the BLLAST comprehensive data set, we are able to quantify the contributions of advection of heat and moisture, and subsidence. We find that subsidence has a clear diurnal pattern. Supported by the presence of a nearby mountain range, this pattern suggests that not only synoptic scales exert their influence on the boundary layer, but also mesoscale circulations. Finally, we study whether the vertical and temporal evolution of turbulent variables are influenced by these large-scale forcings. Our model results show good correspondence of the vertical structure of turbulent variables with observations. Our findings further indicate that when large-scale advection and subsidence are applied, the values for turbulent kinetic are lower than without these large-scale forcings. We conclude that the prototypical CBL can still be used as a valid representation of the boundary-layer dynamics near regions characterized by complex topography and small-scale surface heterogeneity, provided that surface- and large-scale forcings are well characterized.

scholarly journals Can We Infer Diapycnal Mixing Rates from the World Ocean Temperature–Salinity Distribution?

2016 ◽  
Vol 46 (12) ◽  
pp. 3751-3775 ◽  
Author(s):  
Olivier Arzel ◽  
Alain Colin de Verdière
Keyword(s):  
General Circulation ◽  
Large Scale ◽  
Water Mass ◽  
World Ocean ◽  
Eddy Diffusivity ◽  
Regional Variability ◽  
Diapycnal Mixing ◽  
Inverse Models ◽  
The World ◽  
The Difference

AbstractThe turbulent diapycnal mixing in the ocean is currently obtained from microstructure and finestructure measurements, dye experiments, and inverse models. This study presents a new method that infers the diapycnal mixing from low-resolution numerical calculations of the World Ocean whose temperatures and salinities are restored to the climatology. At the difference of robust general circulation ocean models, diapycnal diffusion is not prescribed but inferred. At steady state the buoyancy equation shows an equilibrium between the large-scale diapycnal advection and the restoring terms that take the place of the divergence of eddy buoyancy fluxes. The geography of the diapycnal flow reveals a strong regional variability of water mass transformations. Positive values of the diapycnal flow indicate an erosion of a deep-water mass and negative values indicate a creation. When the diapycnal flow is upward, a diffusion law can be fitted in the vertical and the diapycnal eddy diffusivity is obtained throughout the water column. The basin averages of diapycnal diffusivities are small in the first 1500 m [O(10−5) m2 s−1] and increase downward with bottom values of about 2.5 × 10−4 m2 s−1 in all ocean basins, with the exception of the Southern Ocean (50°–30°S), where they reach 12 × 10−4 m2 s−1. This study confirms the small diffusivity in the thermocline and the robustness of the higher canonical Munk’s value in the abyssal ocean. It indicates that the upward dianeutral transport in the Atlantic mostly takes place in the abyss and the upper ocean, supporting the quasi-adiabatic character of the middepth overturning.

scholarly journals Modelling above-ground carbon dynamics using multi-temporal airborne lidar: insights from a Mediterranean woodland

2016 ◽  
Vol 13 (4) ◽  
pp. 961-973 ◽  
Author(s):  
W. Simonson ◽  
P. Ruiz-Benito ◽  
F. Valladares ◽  
D. Coomes
Keyword(s):  
Climate Change ◽  
Large Scale ◽  
Critical Role ◽  
Carbon Fluxes ◽  
Carbon Dynamics ◽  
Airborne Lidar ◽  
Lidar Data ◽  
Low Carbon ◽  
Data Set ◽  
Multi Temporal

Abstract. Woodlands represent highly significant carbon sinks globally, though could lose this function under future climatic change. Effective large-scale monitoring of these woodlands has a critical role to play in mitigating for, and adapting to, climate change. Mediterranean woodlands have low carbon densities, but represent important global carbon stocks due to their extensiveness and are particularly vulnerable because the region is predicted to become much hotter and drier over the coming century. Airborne lidar is already recognized as an excellent approach for high-fidelity carbon mapping, but few studies have used multi-temporal lidar surveys to measure carbon fluxes in forests and none have worked with Mediterranean woodlands. We use a multi-temporal (5-year interval) airborne lidar data set for a region of central Spain to estimate above-ground biomass (AGB) and carbon dynamics in typical mixed broadleaved and/or coniferous Mediterranean woodlands. Field calibration of the lidar data enabled the generation of grid-based maps of AGB for 2006 and 2011, and the resulting AGB change was estimated. There was a close agreement between the lidar-based AGB growth estimate (1.22 Mg ha−1 yr−1) and those derived from two independent sources: the Spanish National Forest Inventory, and a tree-ring based analysis (1.19 and 1.13 Mg ha−1 yr−1, respectively). We parameterised a simple simulator of forest dynamics using the lidar carbon flux measurements, and used it to explore four scenarios of fire occurrence. Under undisturbed conditions (no fire) an accelerating accumulation of biomass and carbon is evident over the next 100 years with an average carbon sequestration rate of 1.95 Mg C ha−1 yr−1. This rate reduces by almost a third when fire probability is increased to 0.01 (fire return rate of 100 years), as has been predicted under climate change. Our work shows the power of multi-temporal lidar surveying to map woodland carbon fluxes and provide parameters for carbon dynamics models. Space deployment of lidar instruments in the near future could open the way for rolling out wide-scale forest carbon stock monitoring to inform management and governance responses to future environmental change.

scholarly journals Options to correct local turbulent flux measurements for large-scale fluxes using a LES-based approach

2021 ◽  
Author(s):  
Matthias Mauder ◽  
Andreas Ibrom ◽  
Luise Wanner ◽  
Frederik De Roo ◽  
Peter Brugger ◽  
...  
Keyword(s):  
Eddy Covariance ◽  
Large Scale ◽  
Heat Fluxes ◽  
Eddy Covariance Method ◽  
Boundary Layer Height ◽  
Secondary Circulations ◽  
Low Pass ◽  
Measurement Height ◽  
Flux Measurements ◽  
Dispersive Fluxes

Abstract. The eddy-covariance method provides the most direct estimates for fluxes between ecosystems and the atmosphere. However, dispersive fluxes can occur in the presence of secondary circulations, which can inherently not be captured by such single-tower measurements. In this study, we present options to correct local flux measurements for such large-scale transport based on a non-local parametric model that has been developed from a set of idealized LES runs for three real-world sites. The test sites DK-Sor, DE-Fen, and DE-Gwg, represent typical conditions in the mid-latitudes with different measurement height, different terrain complexity and different landscape-scale heterogeneity. Different ways to determine the boundary-layer height, which is a necessary input variable for modelling the dispersive fluxes, are applied, either from operational radio-soundings and local in-situ measurements for the flat site or from backscatter-intensity profile obtained from collocated ceilometers for the two sites in complex terrain. The adjusted total fluxes are evaluated by assessing the improvement in energy balance closure and by comparing the resulting latent heat fluxes with evapotranspiration rates from nearby lysimeters. The results show that not only the accuracy of the flux estimates is improved but also the precision, which is indicated by RMSE values that are reduced by approximately 50 %. Nevertheless, it needs to be clear that this method is intended to correct for a bias in eddy-covariance measurements due to the presence of large-scale dispersive fluxes. Other reasons potentially causing a systematic under- or overestimation, such as low-pass filtering effects and missing storage terms, still need to be considered and minimized as much as possible. Moreover, additional transport induced by surface heterogeneities is not considered.

scholarly journals Synoptic-scale controls of fog and low-cloud variability in the Namib Desert

2020 ◽  
Vol 20 (6) ◽  
pp. 3415-3438 ◽  
Author(s):  
Hendrik Andersen ◽  
Jan Cermak ◽  
Julia Fuchs ◽  
Peter Knippertz ◽  
Marco Gaetani ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Cloud Cover ◽  
Large Scale ◽  
Marine Boundary Layer ◽  
Synoptic Scale ◽  
Namib Desert ◽  
Data Set ◽  
Air Masses ◽  
Low Cloud ◽  
Low Cloud Cover

Abstract. Fog is a defining characteristic of the climate of the Namib Desert, and its water and nutrient input are important for local ecosystems. In part due to sparse observation data, the local mechanisms that lead to fog occurrence in the Namib are not yet fully understood, and to date, potential synoptic-scale controls have not been investigated. In this study, a recently established 14-year data set of satellite observations of fog and low clouds in the central Namib is analyzed in conjunction with reanalysis data in order to identify synoptic-scale patterns associated with fog and low-cloud variability in the central Namib during two seasons with different spatial fog occurrence patterns. It is found that during both seasons, mean sea level pressure and geopotential height at 500 hPa differ markedly between fog/low-cloud and clear days, with patterns indicating the presence of synoptic-scale disturbances on fog and low-cloud days. These regularly occurring disturbances increase the probability of fog and low-cloud occurrence in the central Namib in two main ways: (1) an anomalously dry free troposphere in the coastal region of the Namib leads to stronger longwave cooling of the marine boundary layer, increasing low-cloud cover, especially over the ocean where the anomaly is strongest; (2) local wind systems are modulated, leading to an onshore anomaly of marine boundary-layer air masses. This is consistent with air mass back trajectories and a principal component analysis of spatial wind patterns that point to advected marine boundary-layer air masses on fog and low-cloud days, whereas subsiding continental air masses dominate on clear days. Large-scale free-tropospheric moisture transport into southern Africa seems to be a key factor modulating the onshore advection of marine boundary-layer air masses during April, May, and June, as the associated increase in greenhouse gas warming and thus surface heating are observed to contribute to a continental heat low anomaly. A statistical model is trained to discriminate between fog/low-cloud and clear days based on information on large-scale dynamics. The model accurately predicts fog and low-cloud days, illustrating the importance of large-scale pressure modulation and advective processes. It can be concluded that regional fog in the Namib is predominantly of an advective nature and that fog and low-cloud cover is effectively maintained by increased cloud-top radiative cooling. Seasonally different manifestations of synoptic-scale disturbances act to modify its day-to-day variability and the balance of mechanisms leading to its formation and maintenance. The results are the basis for a new conceptual model of the synoptic-scale mechanisms that control fog and low-cloud variability in the Namib Desert and will guide future studies of coastal fog regimes.

scholarly journals Streamflow indices to identify catchment drivers of hydrograph

2021 ◽  
Author(s):  
Jeenu Mathai ◽  
Pradeep Mujumdar
Keyword(s):  
Large Scale ◽  
Catchment Scale ◽  
Regional Variability ◽  
Data Set ◽  
Temporal Asymmetry ◽  
Hydrologic Processes ◽  
Statistical Assumptions ◽  
Comparative Hydrology ◽  
Time Irreversibility ◽  
Characteristic Features

Abstract. Streamflow indices are flow descriptors that quantify the streamflow dynamics, which are usually determined for a specific basin and are distinct from other basin features. The flow descriptors are appropriate for large-scale and comparative hydrology studies, independent of statistical assumptions and can distinguish signals that indicate basin behavior over time. In this paper, the characteristic features of the hydrograph's temporal asymmetry due to its different underlying hydrologic processes are primarily highlighted. Streamflow indices linked to each limb of the hydrograph within the time-irreversibility paradigm are distinguished with respect to its processes driving the rising and falling limbs. Various streamflow indices relating the rising and falling limbs, and the catchment attributes such as climate, topography, vegetation, geology and soil are then correlated. Finally, the key attributes governing rising and falling limbs are identified. The novelty of the work is on differentiating hydrographs by their time irreversibility property and offering an alternative way to recognize primary drivers of streamflow hydrographs. A set of streamflow indices at the catchment scale for 671 basins in the Contiguous United States (CONUS) is presented here. These streamflow indices complement the catchment attributes provided earlier (Addor et al., 2017) for the CAMELS data set. A series of spatial maps describing the streamflow indices and their regional variability over the CONUS is illustrated in this study.

scholarly journals Evaluation of the the wind farm wake parametrization with large-eddy simulations of wakes in WRF

2021 ◽  
Author(s):  
Alfredo Peña ◽  
Jeffrey Mirocha
Keyword(s):  
Boundary Layer ◽  
Wind Farm ◽  
Wrf Model ◽  
Wind Farms ◽  
Large Eddy Simulations ◽  
Disk Model ◽  
Mesoscale Models ◽  
Boundary Layer Height ◽  
Wind Speeds ◽  
Large Eddy

<p>Mesoscale models, such as the Weather Research and Forecasting (WRF) model, are now commonly used to predict wind resources, and in recent years their outputs are being used as inputs to wake models for the prediction of the production of wind farms. Also, wind farm parametrizations have been implemented in the mesoscale models but their accuracy to reproduce wind speeds and turbulent kinetic energy fields within and around wind farms is yet unknown. This is partly because they have been evaluated against wind farm power measurements directly and, generally, a lack of high-quality observations of the wind field around large wind farms. Here, we evaluate the in-built wind farm parametrization of the WRF model, the so-called Fitch scheme that works together with the MYNN2 planetary boundary layer (PBL) scheme against large-eddy simulations (LES) of wakes using a generalized actuator disk model, which was also implemented within the same WRF version. After setting both types of simulations as similar as possible so that the inflow conditions are nearly identical, preliminary results show that the velocity deficits can differ up to 50% within the same area (determined by the resolution of the mesoscale run) where the turbine is placed. In contrast, within that same area, the turbine-generated TKE is nearly identical in both simulations. We also prepare an analysis of the sensitivity of the results to the inflow wind conditions, horizontal grid resolution of both the LES and the PBL run, number of turbines within the mesoscale grid cells, surface roughness, inversion strength, and boundary-layer height.</p>

scholarly journals Marine boundary layer structure as observed by A-train satellites

2016 ◽  
Vol 16 (9) ◽  
pp. 5891-5903 ◽  
Author(s):  
Tao Luo ◽  
Zhien Wang ◽  
Damao Zhang ◽  
Bing Chen
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Layer Structure ◽  
Mixing Layer ◽  
Eastern Pacific ◽  
Data Set ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Ocean Region ◽  
Low Cloud

Abstract. The marine boundary layer (MBL) structure is important to the marine low cloud processes, and the exchange of heat, momentum, and moisture between oceans and the low atmosphere. This study examines the MBL structure over the eastern Pacific region and further explores the controlling factors of MBL structure over the global oceans with a new 4-year satellite-based data set. The MBL top (boundary layer height, BLH) and the mixing layer height (MLH) were identified using the MBL aerosol lidar backscattering from the CALIPSO (Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations). Results showed that the MBL is generally decoupled with MLH ∕ BLH ratio ranging from  ∼  0.5 to  ∼  0.8 over the eastern Pacific Ocean region. The MBL decoupling magnitude is mainly controlled by estimated inversion strength (EIS), which in turn controls the cloud top entrainment process. The systematic differences between drizzling and non-drizzling stratocumulus tops also show dependence on EIS. This may be related to the meso-scale circulations or gravity wave in the MBL. Further analysis indicates that the MBL shows a similar decoupled structure for clear-sky and cumulus-cloud-topped conditions, but is better mixed under stratiform cloud breakup and overcast conditions.

scholarly journals Evaluation of convective boundary layer height estimates using radars operating at different frequency bands

2021 ◽  
Vol 14 (11) ◽  
pp. 7341-7353
Author(s):  
Anna Franck ◽  
Dmitri Moisseev ◽  
Ville Vakkari ◽  
Matti Leskinen ◽  
Janne Lampilahti ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Potential Temperature ◽  
Convective Boundary ◽  
Data Set ◽  
Layer Height ◽  
Frequency Bands ◽  
Boundary Layer Height ◽  
W Band ◽  
Water Vapour Concentration ◽  
5 Ghz

Abstract. Knowledge of the atmospheric boundary layer state and evolution is important for understanding air pollution and low-level cloud development, among other things. There are a number of instruments and methods that are currently used to estimate boundary layer height (BLH). However, no single instrument is capable of providing BLH measurements in all weather conditions. We proposed a method to derive a daytime convective BLH using clear air echoes in radar observations and investigated the consistency of these retrievals between different radar frequencies. We utilized data from three vertically pointing radars that are available at the SMEAR II station in Finland, i.e. the C band (5 GHz), Ka band (35 GHz) and W band (94 GHz). The Ka- or W-band cloud radars are an integral part of cloud profiling stations of pan-European Aerosol, Clouds and Trace Gases Research Infrastructure (ACTRIS). Our method will be utilized at ACTRIS stations to serve as an additional estimate of the BLH during summer months. During this period, insects and Bragg scatter are often responsible for clear air echoes recorded by weather and cloud radars. To retrieve a BLH, we suggested a mechanism to separate passive and independently flying insects that works for all analysed frequency bands. At the lower frequency (the C band) insect scattering has been separated from Bragg scattering using a combination of the radar reflectivity factor and linear depolarization ratio. Retrieved values of the BLH from all radars are in a good agreement when compared to the BLH obtained with the co-located HALO Doppler lidar and ERA5 reanalysis data set. Our method showed some underestimation of the BLH after nighttime heavy precipitation yet demonstrated a potential to serve as a reliable method to obtain a BLH during clear-sky days. Additionally, the entrainment zone was observed by the C-band radar above the CBL in the form of a Bragg scatter layer. Aircraft observations of vertical profiles of potential temperature and water vapour concentration, collected in the vicinity of the radar, demonstrated some agreement with the Bragg scatter layer.

scholarly journals Planetary boundary layer height from CALIOP compared to radiosonde over China

2016 ◽  
Vol 16 (15) ◽  
pp. 9951-9963 ◽  
Author(s):  
Wanchun Zhang ◽  
Jianping Guo ◽  
Yucong Miao ◽  
Huan Liu ◽  
Yong Zhang ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Planetary Boundary Layer ◽  
Large Scale ◽  
Accurate Estimation ◽  
Orthogonal Polarization ◽  
Planetary Boundary Layer Height ◽  
Layer Height ◽  
Boundary Layer Height ◽  
Spatial Coverage ◽  
Ground Based Lidar

Abstract. Accurate estimation of planetary boundary layer height (PBLH) is key to air quality prediction, weather forecast, and assessment of regional climate change. The PBLH retrieval from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) is expected to complement ground-based measurements due to the broad spatial coverage of satellites. In this study, CALIOP PBLHs are derived from combination of Haar wavelet and maximum variance techniques, and are further validated against PBLHs estimated from ground-based lidar at Beijing and Jinhua. Correlation coefficients between PBLHs from ground- and satellite-based lidars are 0.59 at Beijing and 0.65 at Jinhua. Also, the PBLH climatology from CALIOP and radiosonde are compiled over China during the period from 2011 to 2014. Maximum CALIOP-derived PBLH can be seen in summer as compared to lower values in other seasons. Three matchup scenarios are proposed according to the position of each radiosonde site relative to its closest CALIPSO ground tracks. For each scenario, intercomparisons were performed between CALIOP- and radiosonde-derived PBLHs, and scenario 2 is found to be better than other scenarios using difference as the criteria. In early summer afternoon over 70 % of the total radiosonde sites have PBLH values ranging from 1.6 to 2.0 km. Overall, CALIOP-derived PBLHs are well consistent with radiosonde-derived PBLHs. To our knowledge, this study is the first intercomparison of PBLH on a large scale using the radiosonde network of China, shedding important light on the data quality of initial CALIOP-derived PBLH results.

Sign in / Sign up

Export Citation Format

Share Document