Erosion monitoring of coastal cliffs of geoheritage significance – an example from north east England.

Author(s):  
Lesley Dunlop ◽  
Matthew J Westoby ◽  
Michael Lim

<p>The coastline of County Durham and Tyne and Wear, north east of England, is of geological interest as it displays extensive cliff and foreshore exposures of the dolomites and limestones of later Permian age. The coastline is covered by multiple designations ranging from being a Site of Special Scientific Interest for geological factors to other forms of national and international protection. However, the high cliffs and nature of the deposits means that it is subject to much erosion, rockfalls and exposure to storm activity. For this reason, a lengthy monitoring programme using terrestrial laser scanning (Westoby et al, 2018), photogrammetry (Westoby et al, 2012) and geophysical techniques has been taking place in order to characterise the erosion, recognise points of issue and recommend potential action.</p><p> </p><p>The carbonate rocks, also known as the Magnesian Limestone, were deposited in the Zechstein Sea in a relatively shallow landlocked sea. Straddling latitude 30° north during Late Permian times, the Zechstein Sea was subjected to high evaporation rates leading to evaporate sequences being present. The Permian concretionary limestone is most common in the headlands, stacks and arches, whereas the bays are cut into a weaker dolomite. Marsden Bay includes beach, rock and cliff features and is a classic locality for beach process studies (King, 1953). Whitburn was previously a quarry and coal mine, later infilled and now subject to erosion, undercutting and sink hole appearance.</p><p> </p><p>Rockfalls are often characterised as episodic and unpredictable events, leading to uncertainty and risk for infrastructure and people. As a result of the monitoring it is possible to demonstrate that there are lithologically distinct responses to the passage of the largest storm events.  Foreshore morphology is significant for modulating the relative importance of subaerial and marine erosion drivers. The influence of external environmental controls, notably storm activity, is clearly detectable through regression analysis of rockfall descriptors and environmental variables. Increased storminess, associated with increases in offshore wave heights and cumulative precipitation, corresponds with an increase in total and mean rockfall volume rockfalls at the cliff top during these periods.</p><p> </p><p>The study demonstrates that it is possible to quantify links between environmental variables, in this case offshore wave heights, and erosion prediction. From a hazard and geosite management perspective this finding and framework is significant because it represents an effective new tool for quantifying temporal convergence in rockfall dynamics at lithologically complex rocky coasts over timescales that are relevant for hazard assessment.</p><p> </p><p>King, C.A.M. (1953) The relationship between wave incidence, wind direction and beach changes at Marsden Bay, County Durham. Transactions of the Institute of British Geographers, 19, 13–23.</p><p>Westoby, M.J., Brasington, J., Glasser, N.F., Hambrey, M.J., and Reynolds, J.M., 2012, ‘Structure-from-Motion’ photogrammetry: A low-cost, effective tool for geoscience applications: Geomorphology, v. 179, p. 300-314, https://doi.org/10.1016/j.geomorph.2012.08.021 .</p><p>Westoby, M.J., Lim, M., Hogg, M., Pound, M.J., Dunlop, L., and Woodward, J., 2018, Cost-effective erosion monitoring of coastal cliffs: Coastal Engineering, v. 138, p. 152-164, https://doi.org/10.1016/j.coastaleng.2018.04.008.</p>

2021 ◽  
Author(s):  
William Alexander Osborne ◽  
Rebecca Hodge ◽  
Gordon Love ◽  
Peter Hawkin ◽  
Ruth Hawkin

<p>Splosh, gurgle, burble are all terms that can be used to describe how a river sounds as we stand on the bank. We have developed a new approach that uses the passive sound generated by a river, to gauge the current stage of the river, and generate (sono)hydrographs from the safety of the river bank. Our approach offers a cost-effective, power-efficient and flexible means to install flood monitors. We have developed a method of how to take the sound from around a river and translate it into a useful gauging tool without the need to listen to individual recordings. Using an internet of things approach we have developed a system of sound monitors that can be placed anywhere in the vicinity of a river. We aim to target the lesser studied parts of a river catchment, the headwaters, which are often data scarce environments. These environments are an opportunity to identify the real time responses of sub-catchments. The ultimate goal of our research is to enable community level flood monitoring, in areas that may be susceptible to river flooding, but are not yet actively gauged.</p><p> </p><p>We hypothesise that the sound generated by a river is a direct response to the obstacles found within the channel and the turbulence they cause. Sound is generated by the increase of energy available in the channel, being transformed into sound energy through turbulence generating structures, i.e. boulders. Data gathered over a winter season from several rivers in the North East of England, during Storm Ciara and Dennis, has shown sound to be a reliable method for determining rapid changes in river stage and is comparable to what the official Environment Agency gauges measured. Through an innovative approach, we have begun to understand the limits on sound data and the calibration of sound to the channel properties. Utilising a 7.5 m wide flume at a white water course we have recreated controlled environments and simulated different discharges and their effect on sound.</p><p> </p><p>Overall, we have found that sound is an opportunity to be taken to measure river stage in areas that are seldom studied. We have identified that sound works during extreme conditions, and being placed on the banks of the channel our monitors have a lower risk of being damaged during storm events and are easy and safe to install. We present the first means of using sound from a river to actively gauge a river and the full workflow from collection, analysis and dissemination of results.</p>


1991 ◽  
Vol 113 (2) ◽  
pp. 156-161
Author(s):  
S. R. Winterstein ◽  
S. Haver

Probabilistic models of combined environmental variables are shown, and their effect on the probability distribution of annual maximum base shear is estimated. A new “generalized Gumbel” model is introduced for the critical wave height parameter. By preserving higher statistical moments, this model better follows extreme storm events. Uncertainty in this model is included through statistical uncertainty in these moments. Corresponding reliability confidence intervals are also shown as a function of the sample size of hindcast data. Finally, models of the non-Gaussian crest and the drag parameter are found to be of similar importance in predicting the 100-yr base shear.


Water ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 648
Author(s):  
Stanislav Myslenkov ◽  
Vladimir Platonov ◽  
Alexander Kislov ◽  
Ksenia Silvestrova ◽  
Igor Medvedev

The recurrence of extreme wind waves in the Kara Sea strongly influences the Arctic climate change. The period 2000–2010 is characterized by significant climate warming, a reduction of the sea ice in the Arctic. The main motivation of this research to assess the impact of climate change on storm activity over the past 39 years in the Kara Sea. The paper presents the analysis of wave climate and storm activity in the Kara Sea based on the results of numerical modeling. A wave model WAVEWATCH III is used to reconstruct wind wave fields for the period from 1979 to 2017. The maximum significant wave height (SWH) for the whole period amounts to 9.9 m. The average long-term SWH for the ice-free period does not exceed 1.3 m. A significant linear trend shows an increase in the storm wave frequency for the period from 1979 to 2017. It is shown that trends in the storm activity of the Kara Sea are primarily regulated by the ice. Analysis of the extreme storm events showed that the Pareto distribution is in the best agreement with the data. However, the extreme events with an SWH more than 6‒7 m deviate from the Pareto distribution.


2020 ◽  
Vol 12 (15) ◽  
pp. 2497
Author(s):  
Rohan Bennett ◽  
Peter van Oosterom ◽  
Christiaan Lemmen ◽  
Mila Koeva

Land administration constitutes the socio-technical systems that govern land tenure, use, value and development within a jurisdiction. The land parcel is the fundamental unit of analysis. Each parcel has identifiable boundaries, associated rights, and linked parties. Spatial information is fundamental. It represents the boundaries between land parcels and is embedded in cadastral sketches, plans, maps and databases. The boundaries are expressed in these records using mathematical or graphical descriptions. They are also expressed physically with monuments or natural features. Ideally, the recorded and physical expressions should align, however, in practice, this may not occur. This means some boundaries may be physically invisible, lacking accurate documentation, or potentially both. Emerging remote sensing tools and techniques offers great potential. Historically, the measurements used to produce recorded boundary representations were generated from ground-based surveying techniques. The approach was, and remains, entirely appropriate in many circumstances, although it can be timely, costly, and may only capture very limited contextual boundary information. Meanwhile, advances in remote sensing and photogrammetry offer improved measurement speeds, reduced costs, higher image resolutions, and enhanced sampling granularity. Applications of unmanned aerial vehicles (UAV), laser scanning, both airborne and terrestrial (LiDAR), radar interferometry, machine learning, and artificial intelligence techniques, all provide examples. Coupled with emergent societal challenges relating to poverty reduction, rapid urbanisation, vertical development, and complex infrastructure management, the contemporary motivation to use these new techniques is high. Fundamentally, they enable more rapid, cost-effective, and tailored approaches to 2D and 3D land data creation, analysis, and maintenance. This Special Issue hosts papers focusing on this intersection of emergent remote sensing tools and techniques, applied to domain of land administration.


2021 ◽  
Vol 9 (6) ◽  
pp. 660
Author(s):  
Sagi Knobler ◽  
Daniel Bar ◽  
Rotem Cohen ◽  
Dan Liberzon

There is a lack of scientific knowledge about the physical sea characteristics of the eastern part of the Mediterranean Sea. The current work offers a comprehensive view of wave fields in southern Israel waters covering a period between January 2017 and June 2018. The analyzed data were collected by a meteorological buoy providing wind and waves parameters. As expected for this area, the strongest storm events occurred throughout October–April. In this paper, we analyze the buoy data following two main objectives—identifying the most appropriate statistical distribution model and examining wave data in search of rogue wave presence. The objectives were accomplished by comparing a number of models suitable for deep seawater waves. The Tayfun—Fedele 3rd order model showed the best agreement with the tail of the empirical wave heights distribution. Examination of different statistical thresholds for the identification of rogue waves resulted in the detection of 99 unique waves, all of relatively low height, except for one wave that reached 12.2 m in height which was detected during a powerful January 2018 storm. Characteristics of the detected rogue waves were examined, revealing the majority of them presenting crest to trough symmetry. This finding calls for a reevaluation of the crest amplitude being equal to or above 1.25 the significant wave height threshold which assumes rogue waves carry most of their energy in the crest.


2017 ◽  
Vol 5 (2) ◽  
pp. 293-310 ◽  
Author(s):  
Ryan A. Kromer ◽  
Antonio Abellán ◽  
D. Jean Hutchinson ◽  
Matt Lato ◽  
Marie-Aurelie Chanut ◽  
...  

Abstract. We present an automated terrestrial laser scanning (ATLS) system with automatic near-real-time change detection processing. The ATLS system was tested on the Séchilienne landslide in France for a 6-week period with data collected at 30 min intervals. The purpose of developing the system was to fill the gap of high-temporal-resolution TLS monitoring studies of earth surface processes and to offer a cost-effective, light, portable alternative to ground-based interferometric synthetic aperture radar (GB-InSAR) deformation monitoring. During the study, we detected the flux of talus, displacement of the landslide and pre-failure deformation of discrete rockfall events. Additionally, we found the ATLS system to be an effective tool in monitoring landslide and rockfall processes despite missing points due to poor atmospheric conditions or rainfall. Furthermore, such a system has the potential to help us better understand a wide variety of slope processes at high levels of temporal detail.


Landslides ◽  
2014 ◽  
Vol 12 (2) ◽  
pp. 403-418 ◽  
Author(s):  
Clément Michoud ◽  
Dario Carrea ◽  
Stéphane Costa ◽  
Marc-Henri Derron ◽  
Michel Jaboyedoff ◽  
...  

2010 ◽  
Vol 34 (9) ◽  
pp. 364-366 ◽  
Author(s):  
Dhananjay Kumar Singh ◽  
Shakil Khawaja ◽  
Ishaq Pala ◽  
Jaleel Khaja ◽  
Ray Krishnanu ◽  
...  

Aims and methodCost-effective prescribing is an increasingly important aspect of our practice. A service evaluation was carried out to assess the level of awareness and knowledge of different aspects of cost-effective prescribing among doctors working in the North East London Foundation Trust. A semi-structured questionnaire was used to benchmark knowledge against six standards.ResultsThe survey was completed by 71% of doctors working in adult or old age psychiatry. A total of 2% of doctors stated that they should always take into consideration the price of the drug when prescribing and only 5% of doctors claimed to know the price of medications they prescribe most frequently.Clinical implicationsStrategies to improve the poor level of knowledge and awareness in this area of clinical practice would be of benefit in making the best use of limited financial resources without any detriment to patient care.


Author(s):  
Yuliang Zhu ◽  
Shunqi Pan ◽  
Premanandan T. Fernando ◽  
Xiaoyan Zhou

In this paper, a method to implement the surface elevation at the offshore boundary during storm conditions is presented in the intra-wave period wave model. At storm condition, the offshore incident significant wave height is time varying. In the case of time varying incident wave height, the JONSWAP energy spectrum can be manipulated as follows: H1/32s(f). s(f) is the energy density function for a unit wave height. During a storm event not only the offshore boundary significant wave heights but also the peak frequency varies. If we choose a mean peak frequency during a storm event, s(f) can be calculated for the mean peak frequency for the storm event. The amplitudes of the component waves for the random signals are calculated from the unit energy density function s(f), and the phase angle of the component wave, So we can numerically generate surface elevation time series for the time varying offshore wave heights. The method was verified in the intra-wave period wave model using field measurements at Sea Palling site Norfolk UK.


2021 ◽  
Author(s):  
Khalil Ibrahim Alblooshi ◽  
Kamaljit Singh ◽  
Raju Paul ◽  
Faris Ragheb Kamal

Abstract Offshore business is gradually moving from traditional Well Head Platforms to the concept of Artificial Drill Islands and use of renewable energy sources. Navigational Aids design for artificial drilling islands has unique challenges due to vast periphery. This paper highlights all such challenges along with recommendations for a reliable and cost effective solution. Clients as well as FEED/EPC Contractors can benefit from the experience shared in this paper. The trend over the last decade has been to develop Navigation Aids that minimize maintenance requirements whilst maintaining stable and satisfactory performance. Although, Navigation Aids are automated there is still a need for regular visual inspections as there is always the risk of vandalism, ship impact or damage during significant storm events. Navigational Aids System shall be in strict compliance with International Association of Lighthouse Authorities (IALA) Guidelines. In addition to usual Visual & Audible Navigations Aids, artificial islands require break water lanterns (both red & green type). Also, number of Navigational Aids is much more than those required for a typical offshore platform. Requirement of interfaces with remote ends need to be clearly defined as these have impact on the design and ultimate cost. GSM monitoring and control system, GPS synchronization & AIS remote monitoring shall be considered. Cabling over the Island periphery is neither reliable nor cost effective solution. Standalone solar power based Navigational Aids Skids with all control and monitoring facilities can be more suitable solution. Considering that Island Contractor provides few Navigational Aids before the mobilization of EPC Contractor, it is essential to coordinate the Navigational Aids design aspects to ensure synergy in terms of compatibility.


Sign in / Sign up

Export Citation Format

Share Document