Regional modeling of urban climate: the impact of physical process representation

2020 ◽  
Author(s):  
Peter Huszár ◽  
Jan Karlický ◽  
jana Ďoubalová ◽  
Tereza Nováková ◽  
Filip Švábik ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Urban Areas ◽  
Climate Model ◽  
Numerical Models ◽  
Absolute Humidity ◽  
Average Wind Speed ◽  
Substantial Impact ◽  
Mitigation And Adaptation ◽  
Urban Rural ◽  
The Impact

<p>The urban heat island (UHI) is a relaively old concept and has been widely studied using both observational and modeling approches. However, urban canopies impact the meteorological conditions in the planetary boundary layer (PBL) and above in many other ways, e.g. urban breeze circulation can form, enhanced drag causes intensification of the turbulent diffusion leading to elevated PBL height, reduced evaporation results in decreased absolute humidity, changes in cloudiness etc.<br>A well established regional model representation of these phenomena is crucial for both mitigation and adaptation in areas affected by intense urbanization and climate change. There are however large uncertainities how the underlying physical processes are represented in numerical models, i.e. what models are used along with which parameterizations and parameters.</p><p>Here we perform a regional multi-model analysis over central Europe using the Regional Climate Model (RegCM4) and Weather Research and Forecast (WRF) regional models with different configurations representing different PBL treatment, convection parameterization, surface layer physics, microphysics and urban canopy models. Model results are extensively compared to surface measurements as well as satellite observation of surface temperatures. We analyse the model results mainly in terms of the urban-rural contrast which is a measure of the difference between the urban core value and the vicitinity (with respect to the particular city) for selected meteorological parameters. Our results show substantial impact of the choice of the model as well as the choice of parameterization on the intensity of UHI and other meteorological effects. The urban-rural difference of PBL height and average wind speed between urban areas and their vicinity is affected the most, controlled by the boundary layer physics parameterization.<br>Our simulations confirm the large uncertainity in how models resolve the meteorological features specific to urbanized areas and this has to be taken into account when designing different strategies for urban planning and multimodel approaches should be preferred.<br><br></p>

scholarly journals Numerical Study of the Interaction between Oasis and Urban Areas within an Arid Mountains-Desert System in Xinjiang, China

Atmosphere ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 85
Author(s):  
Peng Cai ◽  
Rafiq Hamdi ◽  
Huili He ◽  
Geping Luo ◽  
Jin Wang ◽  
...  
Keyword(s):  
Land Surface ◽  
Urban Areas ◽  
Climate Model ◽  
Numerical Study ◽  
Urban Expansion ◽  
Regional Climate ◽  
Maximum Effect ◽  
Local Circulation ◽  
Urban Rural ◽  
The Impact

The rapid oasis expansion and urbanization that occurred in Xinjiang province (China) in the last decades have greatly modified the land surface energy balance and influenced the local circulation under the arid mountains-plain background system. In this study, we first evaluated the ALARO regional climate model coupled to the land surface scheme SURFEX at 4 km resolution using 53 national climatological stations and 5 automatic weather stations. We found that the model correctly simulates daily and hourly variation of 2 m temperature and relative humidity. A 4-day clear sky period has been chosen to study both local atmospheric circulations and their mutual interaction. Observations and simulations both show that a low-level divergence over oasis appears between 19:00 and 21:00 Beijing Time when the background mountain-plain wind system is weak. The model simulates a synergistic interaction between the oasis-desert breeze and urban-rural breeze from 16:00 until 22:00 with a maximum effect at 20:00 when the downdraft over oasis (updraft over urban) areas increases by 0.8 (0.4) Pa/s. The results show that the oasis expansion decreases the nocturnal urban heat island in the city of Urumqi by 0.8 °C, while the impact of urban expansion on the oasis cold island is negligible.

scholarly journals Modelling the impact of megacities on local, regional and global tropospheric ozone and the deposition of nitrogen species

2013 ◽  
Vol 13 (24) ◽  
pp. 12215-12231 ◽  
Author(s):  
Z. S. Stock ◽  
M. R. Russo ◽  
T. M. Butler ◽  
A. T. Archibald ◽  
M. G. Lawrence ◽  
...  
Keyword(s):  
Air Quality ◽  
Urban Areas ◽  
Climate Model ◽  
Surface Ozone ◽  
Global Scale ◽  
Chemical Environment ◽  
Ozone Production ◽  
The Uk ◽  
The Impact ◽  
Local Emissions

Abstract. We examine the effects of ozone precursor emissions from megacities on present-day air quality using the global chemistry–climate model UM-UKCA (UK Met Office Unified Model coupled to the UK Chemistry and Aerosols model). The sensitivity of megacity and regional ozone to local emissions, both from within the megacity and from surrounding regions, is important for determining air quality across many scales, which in turn is key for reducing human exposure to high levels of pollutants. We use two methods, perturbation and tagging, to quantify the impact of megacity emissions on global ozone. We also completely redistribute the anthropogenic emissions from megacities, to compare changes in local air quality going from centralised, densely populated megacities to decentralised, lower density urban areas. Focus is placed not only on how changes to megacity emissions affect regional and global NOx and O3, but also on changes to NOy deposition and to local chemical environments which are perturbed by the emission changes. The perturbation and tagging methods show broadly similar megacity impacts on total ozone, with the perturbation method underestimating the contribution partially because it perturbs the background chemical environment. The total redistribution of megacity emissions locally shifts the chemical environment towards more NOx-limited conditions in the megacities, which is more conducive to ozone production, and monthly mean surface ozone is found to increase up to 30% in megacities, depending on latitude and season. However, the displacement of emissions has little effect on the global annual ozone burden (0.12% change). Globally, megacity emissions are shown to contribute ~3% of total NOy deposition. The changes in O3, NOx and NOy deposition described here are useful for quantifying megacity impacts and for understanding the sensitivity of megacity regions to local emissions. The small global effects of the 100% redistribution carried out in this study suggest that the distribution of emissions on the local scale is unlikely to have large implications for chemistry–climate processes on the global scale.

scholarly journals Assessing storm surge hazard and impact of sea level rise in the Lesser Antilles case study of Martinique

2017 ◽  
Vol 17 (9) ◽  
pp. 1559-1571 ◽  
Author(s):  
Yann Krien ◽  
Bernard Dudon ◽  
Jean Roger ◽  
Gael Arnaud ◽  
Narcisse Zahibo
Keyword(s):  
Sea Level Rise ◽  
Sea Level ◽  
Storm Surge ◽  
Numerical Models ◽  
Lesser Antilles ◽  
Adaptation Measures ◽  
Worst Case ◽  
Mitigation And Adaptation ◽  
The Impact

Abstract. In the Lesser Antilles, coastal inundations from hurricane-induced storm surges pose a great threat to lives, properties and ecosystems. Assessing current and future storm surge hazards with sufficient spatial resolution is of primary interest to help coastal planners and decision makers develop mitigation and adaptation measures. Here, we use wave–current numerical models and statistical methods to investigate worst case scenarios and 100-year surge levels for the case study of Martinique under present climate or considering a potential sea level rise. Results confirm that the wave setup plays a major role in the Lesser Antilles, where the narrow island shelf impedes the piling-up of large amounts of wind-driven water on the shoreline during extreme events. The radiation stress gradients thus contribute significantly to the total surge – up to 100 % in some cases. The nonlinear interactions of sea level rise (SLR) with bathymetry and topography are generally found to be relatively small in Martinique but can reach several tens of centimeters in low-lying areas where the inundation extent is strongly enhanced compared to present conditions. These findings further emphasize the importance of waves for developing operational storm surge warning systems in the Lesser Antilles and encourage caution when using static methods to assess the impact of sea level rise on storm surge hazard.

scholarly journals Evaluation of simulated aerosol properties with the aerosol-climate model ECHAM5-HAM using observations from the IMPACT field campaign

2010 ◽  
Vol 10 (16) ◽  
pp. 7709-7722 ◽  
Author(s):  
G.-J. Roelofs ◽  
H. ten Brink ◽  
A. Kiendler-Scharr ◽  
G. de Leeuw ◽  
A. Mensah ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Climate Model ◽  
Lower Boundary ◽  
Synoptic Scale ◽  
Concentration Gradients ◽  
Cloud Properties ◽  
Dry Conditions ◽  
Strong Exchange ◽  
The Impact ◽  
Lower Boundary Layer

Abstract. In May 2008, the measurement campaign IMPACT for observation of atmospheric aerosol and cloud properties was conducted in Cabauw, The Netherlands. With a nudged version of the coupled aerosol-climate model ECHAM5-HAM we simulate the size distribution and chemical composition of the aerosol and the associated aerosol optical thickness (AOT) for the campaign period. Synoptic scale meteorology is represented realistically through nudging of the vorticity, the divergence, the temperature and the surface pressure. Simulated concentrations of aerosol sulfate and organics at the surface are generally within a factor of two from observed values. The monthly averaged AOT from the model is 0.33, about 20% larger than observed. For selected periods of the month with relatively dry and moist conditions discrepancies are approximately −30% and +15%, respectively. Discrepancies during the dry period are partly caused by inaccurate representation of boundary layer (BL) dynamics by the model affecting the simulated AOT. The model simulates too strong exchange between the BL and the free troposphere, resulting in weaker concentration gradients at the BL top than observed for aerosol and humidity, while upward mixing from the surface layers into the BL appears to be underestimated. The results indicate that beside aerosol sulfate and organics also aerosol ammonium and nitrate significantly contribute to aerosol water uptake. The simulated day-to-day variability of AOT follows synoptic scale advection of humidity rather than particle concentration. Even for relatively dry conditions AOT appears to be strongly influenced by the diurnal cycle of RH in the lower boundary layer, further enhanced by uptake and release of nitric acid and ammonia by aerosol water.

scholarly journals Impact of biogenic hydrocarbons on tropospheric chemistry: results from a global chemistry-climate model

2005 ◽  
Vol 5 (5) ◽  
pp. 10517-10612 ◽  
Author(s):  
G. A. Folberth ◽  
D. A. Hauglustaine ◽  
J. Lathière ◽  
F. Brocheton
Keyword(s):  
Tropospheric Ozone ◽  
Radiative Forcing ◽  
Climate Model ◽  
Primary Source ◽  
Tropospheric Chemistry ◽  
Secondary Source ◽  
Peroxy Radicals ◽  
Substantial Impact ◽  
The Impact ◽  
Global Mean

Abstract. We present a description and evaluation of LMDz-INCA, a global three-dimensional chemistry-climate model, pertaining to its recently developed NMHC version. In this substantially extended version of the model a comprehensive representation of the photochemistry of non-methane hydrocarbons (NMHC) and volatile organic compounds (VOC) from biogenic, anthropogenic, and biomass-burning sources has been included. The tropospheric annual mean methane (9.2 years) and methylchloroform (5.5 years) chemical lifetimes are well within the range of previous modelling studies and are in excellent agreement with estimates established by means of global observations. The model provides a reasonable simulation of the horizontal and vertical distribution and seasonal cycle of CO and key non-methane VOC, such as acetone, methanol, and formaldehyde as compared to observational data from several ground stations and aircraft campaigns. LMDz-INCA in the NMHC version reproduces tropospheric ozone concentrations fairly well throughout most of the troposphere. The model is applied in several sensitivity studies of the biosphere-atmosphere photochemical feedback. The impact of surface emissions of isoprene, acetone, and methanol is studied. These experiments show a substantial impact of isoprene on tropospheric ozone and carbon monoxide concentrations revealing an increase in surface O3 and CO levels of up to 30 ppbv and 60 ppbv, respectively. Isoprene also appears to significantly impact the global OH distribution resulting in a decrease of the global mean tropospheric OH concentration by approximately 0.9×105 molecules cm−3 or roughly 10% and an increase in the global mean tropospheric methane lifetime by approximately four months. A global mean ozone net radiative forcing due to the isoprene induced increase in the tropospheric ozone burden of 0.09W m−2 is found. The key role of isoprene photooxidation in the global tropospheric redistribution of NOx is demonstrated. LMDz-INCA calculates an increase of PAN surface mixing ratios ranging from 75 to 750 pptv and 10 to 250 pptv during northern hemispheric summer and winter, respectively. Acetone and methanol are found to play a significant role in the upper troposphere/lower stratosphere (UT/LS) budget of peroxy radicals. Calculations with LMDz-INCA show an increase in HOx concentrations region of 8 to 15% and 10 to 15% due to methanol and acetone biogenic surface emissions, respectively. The model has been used to estimate the global tropospheric CO budget. A global CO source of 3019 TgCO yr−1 is estimated. This source divides into a primary source of 1533 TgCO yr−1 and secondary source of 1489 TgCO yr−1 deriving from VOC photooxidation. Global VOC-to-CO conversion efficiencies of 90% for methane and between 20 and 45% for individual VOC are calculated by LMDz-INCA.

Future humidity extremes in an urban-rural context - using regional climate model projections down to convection permitting scales for Berlin

2021 ◽  
Author(s):  
Gaby S. Langendijk ◽  
Diana Rechid ◽  
Daniela Jacob
Keyword(s):  
Climate Change ◽  
Urban Areas ◽  
Climate Models ◽  
Climate Model ◽  
Regional Climate ◽  
Climate Change Impacts ◽  
Regional Climate Models ◽  
Climate Projections ◽  
Climate Data ◽  
Urban Rural

<p>Urban areas are prone to climate change impacts. A transition towards sustainable and climate-resilient urban areas is relying heavily on useful, evidence-based climate information on urban scales. However, current climate data and information produced by urban or climate models are either not scale compliant for cities, or do not cover essential parameters and/or urban-rural interactions under climate change conditions. Furthermore, although e.g. the urban heat island may be better understood, other phenomena, such as moisture change, are little researched. Our research shows the potential of regional climate models, within the EURO-CORDEX framework, to provide climate projections and information on urban scales for 11km and 3km grid size. The city of Berlin is taken as a case-study. The results on the 11km spatial scale show that the regional climate models simulate a distinct difference between Berlin and its surroundings for temperature and humidity related variables. There is an increase in urban dry island conditions in Berlin towards the end of the 21st century. To gain a more detailed understanding of climate change impacts, extreme weather conditions were investigated under a 2°C global warming and further downscaled to the 3km scale. This enables the exploration of differences of the meteorological processes between the 11km and 3km scales, and the implications for urban areas and its surroundings. The overall study shows the potential of regional climate models to provide climate change information on urban scales.</p>

Modelling rain heterogeneities within an urban neighbourhood

2021 ◽  
Author(s):  
Karolin S. Ferner ◽  
K. Heinke Schlünzen ◽  
Marita Boettcher
Keyword(s):  
Wind Speed ◽  
Urban Areas ◽  
Climate Model ◽  
Numerical Models ◽  
Urban Climate ◽  
Cloud Microphysics ◽  
In Situ Measurements ◽  
Small Scale ◽  
Atmospheric Processes

<p>Urbanisation locally modifies the regional climate: an urban climate develops. For example, the average wind speed in cities is reduced, while the gustiness is increased. Buildings induce vertical winds, which influence the falling of rain. All these processes lead to heterogeneous patterns of rain at ground and on building surfaces. The small-scale spatial rain heterogeneities may cause discomfort for people. Moreover, non-uniform wetting of buildings affects their hydrothermal performance and durability of their facades.</p><p>Measuring rain heterogeneities between buildings is, however, nearly impossible. Building induced wind gusts negatively influence the representativeness of in-situ measurements, especially in densely urbanised areas. Weather radars are usually too coarse and, more importantly, require an unobstructed view over the domain and thus do not measure ground precipitation in urban areas. Consequently, researchers turn to numerical modelling in order to investigate small-scale precipitation heterogeneities between buildings.</p><p>In building science, numerical models are used to investigate rain heterogeneities typically focussing on single buildings and vertical facades. Only few studies were performed for more than a single building or with inclusion of atmospheric processes such as radiation or condensation. In meteorology, increasing computational power now allows the use of small-scale obstacle-resolving models resolving atmospheric processes while covering neighbourhoods.</p><p>In order to assess rain heterogeneities between buildings we extended the micro-scale and obstacle-resolving transport- and stream model MITRAS (Salim et al. 2019). The same cloud microphysics parameterisation as in its mesoscale sister model METRAS (Schlünzen et al., 2018) was applied and boundary conditions for cloud and rain water content at obstacle surfaces were introduced. MITRAS results are checked for plausibility using radar and in-situ measurements (Ferner et al., 2021). To our knowledge MITRAS is the first numerical urban climate model that includes rain and simulates corresponding processes.</p><p>Model simulations were initialised for various wind speeds and mesoscale rain rates to assess their influence on the heterogeneity of falling rain in a domain of 1.9 x 1.7 km² around Hamburg City Hall. We investigated how wind speed or mesoscale rain rate influence the precipitation patterns at ground and at roof level. Based on these results we assessed the height dependence of precipitation. First analyses show that higher buildings receive more rain on their roofs than lower buildings; the results will be presented in detail in our talk.</p><p>Ferner, K.S., Boettcher, M., Schlünzen, K.H. (2021): Modelling the heterogeneity of rain in an urban neighbourhood. Publication in preparation</p><p>Salim, M.H., Schlünzen, K.H., Grawe, D., Boettcher, M., Gierisch, A.M.U., Fock B.H. (2018): The microscale obstacle-resolving meteorological model MITRAS v2.0: model theory. Geosci. Model Dev., 11, 3427–3445, https://doi.org/10.5194/gmd-11-3427-2018.</p><p>Schlünzen, K.H., Boettcher, M., Fock, B.H., Gierisch, A.M.U., Grawe, D., and Salim, M. (2018): Scientific Documentation of the Multiscale Model System M-SYS. Meteorological Institute, Universität Hamburg. MEMI Technical Report 4</p>

Atmospheric impacts of short-lived chlorinated species over the recent past: a chemistry-climate perspective

2021 ◽  
Author(s):  
Ewa Bednarz ◽  
Ryan Hossaini ◽  
Luke Abraham ◽  
Peter Braesicke ◽  
Martyn Chipperfield
Keyword(s):  
Atmospheric Chemistry ◽  
Climate Model ◽  
Stratospheric Ozone ◽  
Lower Boundary ◽  
Montreal Protocol ◽  
Recent Past ◽  
Substantial Impact ◽  
Ozone Depleting Substances ◽  
The Impact

<p>The emissions of most long-lived halogenated ozone-depleting substances (ODSs) are now decreasing, owing to controls on their production introduced by Montreal Protocol and its amendments. However, short-lived halogenated compounds can also have substantial impact on atmospheric chemistry, including stratospheric ozone, particularly if emitted near climatological uplift regions. It has recently become evident that emissions of some chlorinated very short-lived species (VSLSs), such as chloroform (CHCl<sub>3</sub>) and dichloromethane (CH<sub>2</sub>Cl<sub>2</sub>), could be larger than previously believed and increasing, particularly in Asia. While these may exert a significant influence on atmospheric chemistry and climate, their impacts remain poorly characterised. </p><p> </p><p>We address this issue using the UM-UKCA chemistry-climate model (CCM). While not only the first, to our knowledge, model study addressing this problem using a CCM, it is also the first such study employing a whole atmosphere model, thereby simulating the tropospheric Cl-VSLSs emissions and the resulting stratospheric impacts in a fully consistent manner. We use a newly developed Double-Extended Stratospheric-Tropospheric (DEST) chemistry scheme, which includes emissions of all major chlorinated and brominated VSLSs alongside an extended treatment of long-lived ODSs.</p><p> </p><p>We examine the impacts of rising Cl-VSLSs emissions on atmospheric chlorine tracers and ozone, including their long-term trends. We pay particular attention to the role of ‘nudging’, as opposed to the free-running model set up, for the simulated Cl-VSLSs impacts, thereby demostrating the role of atmospheric dynamics in modulating the atmospheric responses to Cl-VSLSs. In addition, we employ novel estimates of Cl-VSLS emissions over the recent past and compare the results with the simulations that prescribe Cl-VSLSs using simple lower boundary conditions. This allows us to demonstrate the impact such choice has on the dominant location and seasonality of the Cl-VSLSs transport into the stratosphere.</p>

scholarly journals Assessing storm surge hazard and impact of sea level rise in Lesser Antilles-Case study of Martinique

2017 ◽  
Author(s):  
Yann Krien ◽  
Bernard Dudon ◽  
Jean Roger ◽  
Gaël Arnaud ◽  
Narcisse Zahibo
Keyword(s):  
Sea Level Rise ◽  
Sea Level ◽  
Storm Surge ◽  
Numerical Models ◽  
Lesser Antilles ◽  
Adaptation Measures ◽  
Worst Case ◽  
Mitigation And Adaptation ◽  
The Impact

Abstract. In the Lesser Antilles, coastal inundations from hurricane-induced storm surges cause great threats to lives, properties, and ecosystems. Assessing current and future storm surge hazard with sufficient spatial resolution is of primary interest to help coastal planners and decision makers develop mitigation and adaptation measures. Here, we use wave-current numerical models and statistical methods to investigate worst case scenarios and 100-year surge levels for the case study of Martinique, under present climate or considering a potential sea-level rise. Results confirm that the wave setup plays a major role in Lesser Antilles, where the narrow island shelf impedes the piling-up of large amounts of wind-driven water on the shoreline during extreme events. The radiation stress gradients thus contribute significantly to the total surge, up to 100 % in some cases. The non-linear interactions of sea level rise with bathymetry and topography are generally found to be relatively small in Martinique, but can reach several tens of centimeters in low-lying areas where the inundation extent is strongly enhanced compared to present conditions. These findings further emphasize the importance of waves for developing operational storm surge warning systems in the Lesser Antilles, and encourage caution when using static methods to assess the impact of sea level rise on storm surge hazard.

Representing Richardson Number Hysteresis in the NWP Boundary Layer

2015 ◽  
Vol 143 (4) ◽  
pp. 1232-1258 ◽  
Author(s):  
Ron McTaggart-Cowan ◽  
Ayrton Zadra
Keyword(s):  
Boundary Layer ◽  
Richardson Number ◽  
Numerical Models ◽  
Rain Event ◽  
Vertical Diffusion ◽  
Predictive Skill ◽  
Turbulence Regime ◽  
Pbl Scheme ◽  
Critical Richardson Number ◽  
The Impact

Abstract Turbulence in the planetary boundary layer (PBL) transports heat, momentum, and moisture in eddies that are not resolvable by current NWP systems. Numerical models typically parameterize this process using vertical diffusion operators whose coefficients depend on the intensity of the expected turbulence. The PBL scheme employed in this study uses a one-and-a-half-order closure based on a predictive equation for the turbulent kinetic energy (TKE). For a stably stratified fluid, the growth and decay of TKE is largely controlled by the dynamic stability of the flow as represented by the Richardson number. Although the existence of a critical Richardson number that uniquely separates turbulent and laminar regimes is predicted by linear theory and perturbation analysis, observational evidence and total energy arguments suggest that its value is highly uncertain. This can be explained in part by the apparent presence of turbulence regime-dependent critical values, a property known as Richardson number hysteresis. In this study, a parameterization of Richardson number hysteresis is proposed. The impact of including this effect is evaluated in systems of increasing complexity: a single-column model, a forecast case study, and a full assimilation cycle. It is shown that accounting for a hysteretic loop in the TKE equation improves guidance for a canonical freezing rain event by reducing the diffusive elimination of the warm nose aloft, thus improving the model’s representation of PBL profiles. Systematic enhancements in predictive skill further suggest that representing Richardson number hysteresis in PBL schemes using higher-order closures has the potential to yield important and physically relevant improvements in guidance quality.

Sign in / Sign up

Export Citation Format

Share Document