New insights into the internal structure of Turbidite deposits from physical modelling of relevant erosional and depositional processes

Author(s):  
Jonathan Wilkin

<p>Results are presented from the current experimental campaign which aims to observe the character of supercritical turbidity currents and other supercritical sediment gravity flows (SGFs) as they respond to morphological transition zones, e.g. slope breaks and losses of lateral confinement. This experimental setup aims to reproduce lower slope, channel-lobe transition zone, and, proximal lobe conditions, in order to be analogous to conditions found within deep-marine sedimentary environments such as those found within foreland basins, and on passive margins. Of particular interest is the sedimentological expression of these systems, how sedimentological variability arises in the form of sediment waves and scour fields, and how does an understanding of current dynamics help in the prediction of the internal structures of these features. Thus, this study will yield new data on how turbidity currents impact multi-layered sedimentary beds and determine parametric controls on erosion, deposition and bed restructuring processes. Turbidity currents are scaled via dimensionless parameters representing prevalent flow (e.g. Reynolds, Densimetric Froude Number, and Shields Numbers) and sedimentary (e.g. Rouse and Reynolds Particle Numbers) conditions, following the scaling techniques of de Leeuw et al., (2016) which have now been tested in numerous experimental studies e.g. Pohl et al., 2019.</p><p> </p><p>Investigating how varying experimental conditions such as current parameters, severity of breaks in-slope, and, losses of lateral confinement impact the resulting depositional signature of lower slope, and channel-lobe transition zones. Of particular interest is the impact of previously developed bedforms upon current dynamics which will be studied via UVP and ADV measurements, as well as through the application of digital elevation models (DEM), which will be used to understand how systems evolve over multiple runs. DEM models will be generated using a photogrammetry technique capable of producing a high-resolution model (±2mm). The results of which will then be linked to synchronous sedimentological packages – both on the modern seafloor and preserved within ancient geological outcrops – with the aim of enhancing the predictive sedimentological concepts applied to these systems when being interpreted within the subsurface.</p><p> </p><p>A seafloor study will focus upon supercritical bedforms generated by SGFs upon a deep-water slope and terrace located offshore of Senegal, West Africa. Combining seafloor seismic images, high-resolution sparker data, and drop cores taken from deep water channels, and overbanks. Through the interpretation of this dataset, it will be possible to understand the sedimentological variability of bedforms present on this slope system and allude to the flow conditions that led to their formation.</p><p> </p><p>References</p><p>de Leeuw, J., Eggenhuisen, J.T., Cartigny, M.J.B., 2016. Morphodynamics of submarine channel inception revealed by new experimental approach. Nat. Commun. 7. https://doi.org/10.1038/ncomms10886</p><p>Pohl, F., Eggenhuisen, J.T., Cartigny, M.J.B., Tilston, M., de Leeuw, J. & Hermidas, N. (in review). The influence of a slope break on turbidite deposits: an experimental investigation. Marine Geology.</p>

2020 ◽  
Vol 90 (12) ◽  
pp. 1678-1705
Author(s):  
Kévin Boulesteix ◽  
Miquel Poyatos-Moré ◽  
David M. Hodgson ◽  
Stephen S. Flint ◽  
Kevin G. Taylor

ABSTRACT Mud dominates volumetrically the fraction of sediment delivered and deposited in deep-water environments, and mudstone is a major component of basin-floor successions. However, studies of basin-floor deposits have mainly focused on their proximal sandstone-prone part. A consequent bias therefore remains in the understanding of depositional processes and stratigraphic architecture in mudstone-prone distal settings beyond the sandstone pinchouts of basin-floor fans. This study uses macroscopic and microscopic descriptions of over 500 m of continuous cores from research boreholes from the Permian Skoorsteenberg Formation of the Karoo Basin, South Africa, to document the sedimentology, stratigraphy, and ichnology of a distal mudstone-prone basin-floor succession. Very thin- to thin-bedded mudstones, deposited by low-density turbidity currents, stack to form bedsets bounded by thin packages (< 0.7 m thick) of background mudstones. Genetically related bedsets stack to form bedset packages, which are bounded by thicker (> 0.7 m thick) background mudstones. Stratigraphic correlation between cores suggests that bedsets represent the distal fringes of submarine fan lobe elements and/or lobes, and bedset packages represent the distal fringes of lobe complexes and/or lobe complex sets. The internal stacking pattern of bedsets and bedset packages is highly variable vertically and laterally, which records dominantly autogenic processes (e.g., compensational stacking, avulsion of feeder channels). The background mudstones are characterized by remnant tractional structures and outsize particles, and are interpreted as deposited from low-density turbidity currents and debris flows before intense biogenic reworking. These observations challenge the idea that mud accumulates only from hemipelagic suspension fallout in distal basin-floor environments. Thin background mudstones separating bedsets (< 0.7 m thick) are interpreted to mainly represent autogenically driven lobe abandonment due to up-dip channel avulsion. The thicker background mudstones separating bedset packages (> 0.7 m thick) are interpreted to dominantly mark allogenically driven regional decrease of sand supply to the basin floor. The recognition of sandstone-prone basin-floor fans passing into genetically linked distal fringe mudstones suggests that submarine lobes are at least ∼ 20 km longer than previously estimated. This study provides sedimentological, stratigraphic, and ichnological criteria to differentiate mudstones deposited in different sub-environments in distal deep-water basin-floor settings, with implications for the accurate characterization of basin-floor fan architecture, and their use as archives of paleoenvironmental change.


2020 ◽  
Author(s):  
Adrian Linsel ◽  
Sebastian Wiesler ◽  
Jens Hornung ◽  
Matthias Hinderer

Abstract. The prediction of physicochemical rock properties in subsurface models regularly suffers from uncertainty observed at the sub-meter scale. Although at this scale – which is commonly termed the lithofacies scale – the physicochemical variability plays a critical role for various types of subsurface utilization, its dependence on syn- and post-depositional processes is still subject to investigation. The impact of syn- and post-depositional geological processes, including depositional dynamics, diagenetical compaction and chemical mass transfer, onto the spatial distribution of physicochemical properties in siliciclastic media at the lithofacies scale is investigated in this study. We propose a new workflow using two cubic rock samples where eight representative geochemical, thermophysical, elastic and hydraulic properties are measured on the cubes' faces and on samples taken from the inside. The scalar fields of the properties are then constructed by means of spatial interpolation. The rock cubes represent the structurally most homogeneous and most heterogeneous lithofacies types observed in a Permian lacustrine delta formation that deposited in an intermontane basin. The spatio-temporal controlling factors are identified by exploratory data analysis and geostatistical modeling in combination with thin section and environmental scanning electron microscopy analyses. Sedimentary structures are well preserved in the spatial patterns of the negatively correlated permeability and mass fraction of Fe2O3. The Fe-rich mud fraction, which builds large amounts of the intergranular rock matrix and of the pseudomatrix, has a degrading effect onto the hydraulic properties. This relationship is underlined by a zonal anisotropy that is connected to the observed stratification. Feldspar alteration produced secondary pore space that is filled with authigenic products including illite, kaolinite and opaque phases. The local enrichment of clay minerals implies a non-pervasive alteration process that is expressed by network-like spatial patterns of the positively correlated mass fractions of Al2O3 and K2O. Those patterns are spatially decoupled from primary sedimentary structures. The elastic properties, namely p- and s-wave velocity, indicate a weak anisotropy that is not inevitably oriented perpendicularly to the sedimentary structures. The multifarious patterns observed in this study emphasize the importance of high-resolution sampling in order to properly model the variability present in a lithofacies-scale system. In fact, the physicochemical variability observed at the lithofacies scale might nearly cover the global variability in a formation. Hence, if the local variability is not considered in full-field projects – where the sampling density is usually low – statistical correlations and thus conclusions about causal relationships among physicochemical properties might be feigned inadvertently.


2021 ◽  
Author(s):  
Natacha Fabregas ◽  
Sofia Pechlivanidou ◽  
Robert Gawthorpe ◽  
Mary Ford ◽  
Richard Collier

<p>Relatively few detailed studies exist of rift axis depositional systems and the controls on their sedimentology and stratigraphy. Cores from the IODP Expedition 381 (Corinth Active Rift Development) provide a continuous high resolution stratigraphic record of depositional processes operating within this deep-water rift. During the Late Quaternary, the Gulf of Corinth alternated between marine and isolated/non-marine conditions due to intermittent connection with the open ocean across a sill driven by climate-related sea-level fluctuations. In this study we performed bed scale logging of the sedimentary deposits within the eastern Gulf of Corinth in order to understand key controls on sedimentation during the Late Quaternary. High resolution, mm-scale analysis was performed on the first 300 m of core from Site M0079 that records the last two glacial-interglacial cycles and the Holocene (Marine Isotope Stages 1 to 7). The succession is dominated by fine-grained gravity flows (event beds) and hemipelagic sediments. Event beds result from discrete events that interrupt/overprint ongoing low energy sedimentation. As such, these have been abstracted in order to define three main sedimentary unit types. Unit-scale logging was extended to the rest of the succession and to the other drill sites to build a stratigraphic and depositional model covering the last ca. 700 kyr of deposition. Our results show that during interglacial periods (i.e. marine conditions), the sediment record consists mainly of highly bioturbated mud with rarer occurrences of coarser grained sediment. Sedimentary structures and identifiable event beds have largely been lost due to the high degree of bioturbation. In contrast, during glacial periods (i.e. isolated/semi-isolated lake conditions) the deposits are well bedded with a low bioturbation index and background muds alternate with event beds. Transitional strata, between marine and non-marine units, show finely laminated beds rich in aragonite, often becoming more organic rich toward the top. The deepest parts of the core penetrate slumped units and thicker gravity flow deposits. This study allows us to recognise the response to high frequency climatic fluctuations recorded in the sedimentary succession of this deep-water rift.</p>


1972 ◽  
Vol 109 (2) ◽  
pp. 115-126 ◽  
Author(s):  
David J. W. Piper

SummaryMany deep water marine muds, including lower Palaeozoic mudstones from Britain, have thin graded beds in which mud and silt laminae alternate, with the silt becoming finer and less abundant upwards. Of the known deep-sea depositional processes, turbidity currents are the most likely cause of such graded laminated beds. The lamination may be produced by alternating cohesive and granular bed conditions. Much more careful examination of laminated fine grained terrigenous sediment is needed.


2017 ◽  
Vol 14 (5) ◽  
pp. 1197-1213 ◽  
Author(s):  
Mohamed Ayache ◽  
Jean-Claude Dutay ◽  
Anne Mouchet ◽  
Nadine Tisnérat-Laborde ◽  
Paolo Montagna ◽  
...  

Abstract. A high-resolution dynamical model (Nucleus for European Modelling of the Ocean, Mediterranean configuration – NEMO-MED12) was used to give the first simulation of the distribution of radiocarbon (14C) across the whole Mediterranean Sea. The simulation provides a descriptive overview of both the natural pre-bomb 14C and the entire anthropogenic radiocarbon transient generated by the atmospheric bomb tests performed in the 1950s and early 1960s. The simulation was run until 2011 to give the post-bomb distribution. The results are compared to available in situ measurements and proxy-based reconstructions. The radiocarbon simulation allows an additional and independent test of the dynamical model, NEMO-MED12, and its performance to produce the thermohaline circulation and deep-water ventilation. The model produces a generally realistic distribution of radiocarbon when compared with available in situ data. The results demonstrate the major influence of the flux of Atlantic water through the Strait of Gibraltar on the inter-basin natural radiocarbon distribution and characterize the ventilation of intermediate and deep water especially through the propagation of the anthropogenic radiocarbon signal. We explored the impact of the interannual variability on the radiocarbon distribution during the Eastern Mediterranean Transient (EMT) event. It reveals a significant increase in 14C concentration (by more than 60 ‰) in the Aegean deep water and at an intermediate level (value up to 10 ‰) in the western basin. The model shows that the EMT makes a major contribution to the accumulation of radiocarbon in the eastern Mediterranean deep waters.


2016 ◽  
Author(s):  
Mohamed Ayache ◽  
Jean-Claude Dutay ◽  
Anne Mouchet ◽  
Nadine Tisnérat-Laborde ◽  
Paolo Montagna ◽  
...  

Abstract. A high-resolution dynamical model (NEMO-MED12) was use to give the first simulation of the distribution of radiocarbon (14C) across the whole Mediterranean Sea. The simulation provides a descriptive overview of both the natural pre-bomb 14C and the entire anthropogenic radiocarbon transient generated by the atmospheric bomb tests performed in the 1950s and early 1960s. The simulation was run until 2010 to give the post-bomb distribution. The results are compared to available in-situ measurements and proxy-based reconstructions. The radiocarbon simulation allows an additional and independent test of the dynamical model, NEMO-MED12, and its performance to produce the thermohaline circulation and deep-water ventilation. The model produces a generally realistic distribution of radiocarbon when compared with available in-situ data. The results demonstrate the major influence of the flux of Atlantic water through the strait of Gibraltar on the inter-basin natural radiocarbon distribution, and characterize the ventilation of intermediate and deep water ventilation especially through the propagation of the anthropogenic radiocarbon signal. We explored the impact of the interannual variability on the radiocarbon distribution during the Eastern Mediterranean transient event (EMT). It reveals a significant increase in 14C concentration (by more than 60 ‰) in the Aegean deep water, and at intermediate level (value up to 10 ‰) in the western basin. The model shows that the EMT makes a major contribution to the accumulation of radiocarbon in the eastern Mediterranean deep waters.


2011 ◽  
Vol 48 (8) ◽  
pp. 1209-1231 ◽  
Author(s):  
Pierre Malhame ◽  
Reinhard Hesse

The Kamouraska Formation is an uppermost Cambrian – lowermost Ordovician quartz-arenite-dominated unit of controversial origin deposited on the southeastern slope of Laurentia bordering the Iapetus Ocean. It is exposed in the Quebec Appalachians on the south shore of the St. Lawrence Estuary. The formation consists of basal polymictic conglomerate and overlying massive sheet-like quartz arenite. The conglomerate beds are reversely and reversely to normally graded. The quartz arenite beds are generally massive, although they may show coarse-tail grading. Beds containing full or partial Bouma sequences are rare. Paleoflow directions from ripple-cross lamination, ripple marks on bed surfaces, and sole marks point towards southeast, south, and southwest. The clastic sediments of the Kamouraska were transported into the deep sea by sediment gravity flows that evolved from hyperconcentrated to concentrated density flows, and then to turbidity currents. The depositional environment is interpreted to have been a southwest-trending meandering submarine canyon. The exposed part of the canyon deposits is slightly oblique to the strike of slope. If correct, our interpretation establishes the preservation of continental-slope deposits in more distal deep-water siliciclastic sedimentary rocks of the Taconian orogen in Quebec, which traditionally have been interpreted as submarine-fan and (or) basin-plain deposits. The orientation of a canyon near parallel-to strike of the slope may have been controlled by syn-depositional growth faults. The coarsest hyperconcentrated flows, which deposited the conglomerate, were restricted to the deepest parts of the canyon during its early stages of development, whereas the concentrated density flows that deposited the massive quartz-arenite beds covered a wider area.


Author(s):  
N. D. Browning ◽  
M. M. McGibbon ◽  
M. F. Chisholm ◽  
S. J. Pennycook

The recent development of the Z-contrast imaging technique for the VG HB501 UX dedicated STEM, has added a high-resolution imaging facility to a microscope used mainly for microanalysis. This imaging technique not only provides a high-resolution reference image, but as it can be performed simultaneously with electron energy loss spectroscopy (EELS), can be used to position the electron probe at the atomic scale. The spatial resolution of both the image and the energy loss spectrum can be identical, and in principle limited only by the 2.2 Å probe size of the microscope. There now exists, therefore, the possibility to perform chemical analysis of materials on the scale of single atomic columns or planes.In order to achieve atomic resolution energy loss spectroscopy, the range over which a fast electron can cause a particular excitation event, must be less than the interatomic spacing. This range is described classically by the impact parameter, b, which ranges from ~10 Å for the low loss region of the spectrum to <1Å for the core losses.


Author(s):  
P. Vikulin ◽  
K. Khlopov ◽  
M. Cherkashin

Enhancing water purification processes is provided by various methods including physical ones, in particular, exposure to ultrasonic vibrations. The change in the dynamic viscosity of water affects the rate of deposition of particles in the aquatic environment which can be used in natural and wastewater treatment. At the Department Water Supply and Wastewater Disposal of the National Research Moscow State University of Civil Engineering experimental studies were conducted under laboratory conditions to study the effect of ultrasound on the change in the dynamic viscosity of water. A laboratory setup has been designed consisting of an ultrasonic frequency generator of the relative intensity, a transducer (concentrator) that transmits ultrasonic vibrations to the source water, and sonic treatment tanks. Experimental studies on the impact of the ultrasonic field in the cavitation mode on the dynamic viscosity of the aqueous medium were carried out the exposure time was obtained to achieve the maximum effect.Интенсификация процессов очистки воды осуществляется с помощью различных методов, в том числе и физических, в частности воздействием ультразвуковых колебаний. Изменение динамической вязкости воды влияет на скорость осаждения частиц в водной среде, что может быть использовано в процессах очистки природных и сточных вод. На кафедре Водоснабжение и водоотведение Национального исследовательского Московского государственного строительного университета в лабораторных условиях проведены экспериментальные исследования по изучению влияния ультразвука на изменение динамической вязкости воды. Разработана схема лабораторной установки, состоящая из генератора ультразвуковых частот с соответствующей интенсивностью, преобразователя (концентратора), передающего ультразвуковые колебания в исходную воду, и емкости для озвучивания. Выполнены экспериментальные исследования по влиянию ультразвукового поля в режиме кавитации на динамическую вязкость водной среды, получено время экспозиции для достижения максимального эффекта.


1977 ◽  
Vol 12 (1) ◽  
pp. 77-90
Author(s):  
J.F. Cordoba-Molina ◽  
P.L. Silveston ◽  
R. R. Hudgins

Abstract A simple Flow Model is proposed to describe the dynamic response of sedimentation basins. The response predicted by this model is linear as opposed to the real response of the basin which is nonlinear. However, the real response of the basin is highly correlated with its densimetric Froude number, and as a consequence our linear model effectively predicts the response of the basin in a restricted densimetric Froude Number range. Our experiments show that the response of the basin becomes more sluggish and erratic as the densimetric Froude number decreases.


Sign in / Sign up

Export Citation Format

Share Document