scholarly journals Measurement experiences with FluxSet digital D/I station

2017 ◽  
Vol 6 (2) ◽  
pp. 279-284 ◽  
Author(s):  
László Hegymegi ◽  
János Szöllősy ◽  
Csaba Hegymegi ◽  
Ádám Domján
Keyword(s):  
Measurement Method ◽  
Measurement Data ◽  
Digital Form ◽  
New Instrument ◽  
Measurement Results ◽  
Inclination Angles ◽  
Flux Gate

Abstract. Geomagnetic observatories use classical theodolites equipped with single-axis flux-gate magnetometers known as declination–inclination magnetometers (DIM) to determine absolute values of declination and inclination angles. This instrument and the measurement method are very reliable but need a lot of handwork and experience. The authors developed and built a non-magnetic theodolite which gives all measurement data in digital form. Use of this instrument significantly decreases the possibility of observation errors and minimises handwork. The new instrument is presented in this paper together with first measurement results in comparison to the classical DIM.

scholarly journals Measurement experiences with FluxSet digital D/I station

2017 ◽  
Author(s):  
László Hegymegi ◽  
János Szöllősy ◽  
Csaba Hegymegi ◽  
Ádám Domján
Keyword(s):  
Measurement Method ◽  
Measurement Data ◽  
Digital Form ◽  
New Instrument ◽  
Measurement Results ◽  
Inclination Angles ◽  
Flux Gate

Abstract. Geomagnetic observatories use classical theodolites equipped with single axis flux-gate magnetometers known as declination inclination magnetometers (DIM) to determine absolute values of declination and inclination angles. This instrument and the measurement method is very reliable but needs a lot of handwork and experience. The authors developed and built a non-magnetic theodolite which gives all measurement data in digital form. Use of this instrument significantly decreases possibility of observation errors and minimizes handwork. The new instrument is presented in this paper together with first measurement results in comparison to the classical DIM.

scholarly journals Analisis Performance Jangka Pendek Pembangkit Listrik Tenaga Surya dengan Sistem Stand-alone System

2021 ◽  
Vol 8 (1) ◽  
pp. 22-27
Author(s):  
Rhezal Agung Ananto ◽  
Asfari Hariz Santoso
Keyword(s):  
Renewable Energy ◽  
Solar Energy ◽  
Energy Demand ◽  
Measurement Method ◽  
Measurement Data ◽  
Photovoltaic Efficiency ◽  
Variable Voltage ◽  
Measurement Results ◽  
Power Generation Technology ◽  
Power And Energy

Renewable energy power generation technology continues to develop every year and energy demand continues to increase. Reducing carbon emissions in accordance with international carbon emission policies (including Indonesia). The renewable energy target is targeted to increase every year in accordance with the national renewable energy mix policy. Renewable energy has characteristics that fluctuate over time, so continuous measurement data is needed. This data is used for the design of renewable energy in Indonesia in the future. To analyze the performance of a solar power plant, measurement variables are needed. Photovoltaic analysis requires measurement of variable voltage, current, power and energy. Measurement variables are measurement variables from photovoltaic and measurement variables from solar energy. The measurement of solar energy is measured in Watts per square meter. The measurement method is a direct measurement in the territory of Indonesia. The measurement method is the measurement at sunrise to sunset. The measurement results are used for performance analysis. The measurements result are used for photovoltaic efficiency analysis.

scholarly journals Modeling of German Low Voltage Cables with Ground Return Path

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1265 ◽  
Author(s):  
Johanna Geis-Schroer ◽  
Sebastian Hubschneider ◽  
Lukas Held ◽  
Frederik Gielnik ◽  
Michael Armbruster ◽  
...  
Keyword(s):  
Low Voltage ◽  
Measurement Data ◽  
Analytical Calculation ◽  
Laboratory Measurement ◽  
Model Parameters ◽  
Calculation Methods ◽  
Modeling Approach ◽  
Measurement Results ◽  
Simulation Results ◽  
Return Path

In this contribution, measurement data of phase, neutral, and ground currents from real low voltage (LV) feeders in Germany is presented and analyzed. The data obtained is used to review and evaluate common modeling approaches for LV systems. An alternative modeling approach for detailed cable and ground modeling, which allows for the consideration of typical German LV earthing conditions and asymmetrical cable design, is proposed. Further, analytical calculation methods for model parameters are described and compared to laboratory measurement results of real LV cables. The models are then evaluated in terms of parameter sensitivity and parameter relevance, focusing on the influence of conventionally performed simplifications, such as neglecting house junction cables, shunt admittances, or temperature dependencies. By comparing measurement data from a real LV feeder to simulation results, the proposed modeling approach is validated.

scholarly journals Inverse Infiltration Modeling of Dike Covers Made of Dredged Material Using PEST and AMALGAM

Geosciences ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 41
Author(s):  
Tim Jurisch ◽  
Stefan Cantré ◽  
Fokke Saathoff
Keyword(s):  
Large Scale ◽  
Measurement Data ◽  
Fine Grained ◽  
Dredged Materials ◽  
Measurement Results ◽  
Large Scale Field ◽  
Eigenvalue Ratio ◽  
Ill Posed ◽  
Materials Used ◽  
Installation Technology

A variety of studies recently proved the applicability of different dried, fine-grained dredged materials as replacement material for erosion-resistant sea dike covers. In Rostock, Germany, a large-scale field experiment was conducted, in which different dredged materials were tested with regard to installation technology, stability, turf development, infiltration, and erosion resistance. The infiltration experiments to study the development of a seepage line in the dike body showed unexpected measurement results. Due to the high complexity of the problem, standard geo-hydraulic models proved to be unable to analyze these results. Therefore, different methods of inverse infiltration modeling were applied, such as the parameter estimation tool (PEST) and the AMALGAM algorithm. In the paper, the two approaches are compared and discussed. A sensitivity analysis proved the presumption of a non-linear model behavior for the infiltration problem and the Eigenvalue ratio indicates that the dike infiltration is an ill-posed problem. Although this complicates the inverse modeling (e.g., termination in local minima), parameter sets close to an optimum were found with both the PEST and the AMALGAM algorithms. Together with the field measurement data, this information supports the rating of the effective material properties of the applied dredged materials used as dike cover material.

Detection and Analysis of Rats’ Bioelectromagnetic Signal

2014 ◽  
Vol 536-537 ◽  
pp. 13-17
Author(s):  
Hong Long Cao ◽  
Fen Ju Qin ◽  
Xue Guan Liu ◽  
He Ming Zhao
Keyword(s):  
Standard Deviation ◽  
Automatic System ◽  
Measurement Method ◽  
Measurement Accuracy ◽  
Biological Activities ◽  
Measurement Data ◽  
Measured Data ◽  
The Mean ◽  
Frequency Window ◽  
Window Effects

In this paper, we designed an automatic system and automatic test software, and they can carry out Kunming rats bioelectromagnetic measurement in standard status and anesthesia automatically in anechoic chamber where the electromagnetic field outside is shielded, the reflection wave is absorbed, and the measurement accuracy will be improved. We get a great number of measurement data with frequency-sweep measurement method. The mean and standard deviation of amplitudes vs. frequencies is calculated and analyzed. The results show the measurement method is feasible. We have plotted the means of measured data as multiple sets of Y values in a series of bars with standard deviations bars included and distributed in the frequency axis of X. It is found that the fluctuation of the mean and standard deviation in some frequencies is not evident which may explain frequency window effects, while in other frequencies, such a fluctuation can be obviously observed, which may suggest that bioelectromagnetic signal is influenced by biological activities (standard and anaesthesia status) in these frequency points.

Geometrical Modeling of Tool-Workpiece Contact Zone and Chip Formation in Finish Ball End Milling Process with Tool Inclination Angles

2016 ◽  
Vol 693 ◽  
pp. 788-794
Author(s):  
Xiao Xiao Chen ◽  
Jun Zhao
Keyword(s):  
Contact Zone ◽  
Measurement Method ◽  
End Milling ◽  
Milling Process ◽  
Ball End Milling ◽  
Geometrical Modeling ◽  
Section Area ◽  
Inclination Angles ◽  
Area And Perimeter ◽  
End Milling Process

The tool-workpiece contact zone is an important issue in the ball end milling process. This paper investigated the effects of tool inclination angles on the tool-workpiece contact zone, and variations of the cutting section area and perimeter with the increasing tilt and lead angles were also analyzed by geometrical modeling and measurement method for ball end milling process. The appropriate tool inclination angles, which could avoid the extrusion and friction between tool tip and the uncut materials, shorten the loading time on the cutting flute, and decrease the maximum cutting forces, could be preferentially selected according to the distribution characteristics of the tool-workpiece contact zone and the variations of the cutting section area and perimeter corresponding to various tool postures.

Block Thickness Measurement of Using the Structured Light Vision

2018 ◽  
Vol 33 (01) ◽  
pp. 1955001 ◽  
Author(s):  
Fenghui Lian ◽  
Qingchang Tan ◽  
Siyuan Liu
Keyword(s):  
Machine Vision ◽  
Measurement Method ◽  
Measurement Accuracy ◽  
Thickness Measurement ◽  
Base Plane ◽  
Vision Measurement ◽  
Measurement Results ◽  
Measurement Equations ◽  
Structured Light Vision ◽  
Measuring Base

A method for measuring block thicknesses is proposed by the machine vision measurement. Equations of the measuring base plane and the light plane are formed by calibration. Then, the equation of the light strip image, that is, the image of the intersection between the base plane and light one, is established by the projection relation. Equation of the image of the light strip on the measured plane can be determined by the fitting. Since the light strip on the measuring base plane is parallel to one on the measured plane, the thickness of the measuring block is measured by using the two equations. The experiment evaluates the measurement accuracy of the measurement method and analyzes the influence of some factors on the measurement results.

scholarly journals Prototype Sistem Deteksi Partial Discharge Pada Isolasi Kabel Menggunakan Sensor Microphone (Prototype Of Partial Discharge Detection System In Cable Isolation Using Microphone Sensor)

2019 ◽  
Vol 3 (2) ◽  
pp. 206
Author(s):  
Mochamad Zaeynuri Setiawan ◽  
Fachrudin Hunaini ◽  
Mohamad Mukhsim
Keyword(s):  
Detection System ◽  
Partial Discharge ◽  
Measurement Data ◽  
Negative Ions ◽  
High Sensitivity ◽  
Sound Waves ◽  
Cable Insulation ◽  
Insulation Failure ◽  
Measurement Results ◽  
Discharge Detection

The phenomenon that often arises in a substation is the problem of partial discharge in outgoing cable insulation. Partial discharge is a jump of positive and negative ions that are not supposed to meet so that it can cause a spark jump. If a partial discharge is left too long it can cause insulation failure, the sound of snakes like hissing and the most can cause a flashover on the outgoing cable. Then a partial discharge detection prototype was made in the cable insulation in order to anticipate the isolation interference in the outgoing cable. Can simplify the work of substation operators to check the reliability of insulation on the outgoing side of each cubicle. So it was compiled as a method for measuring sound waves caused by partial discharge in the process of measuring using a microphone sensor, the Arduino Mega 2560 module as a microcontroller, the LCD TFT as a monitoring and the MicroSD card module as its storage. The microphone sensor is a sensor that has a high sensitivity to sound, has 2 analog and digital readings, and is easily designed with a microcontroller. Basically the unit of measure measured at partial discharge is Decibels. The results of the prototype can be applied to the cubicle and the way it works is to match the prototype to the outgoing cubicle cable then measure from the cable boots connector to the bottom of the outgoing cable with a distance of 1 meter. Then the measurement results will be monitored on the TFT LCD screen in the form of measurement results, graphs and categories on partial discharge. In this design the measurement data made by the microphone can be stored with microSD so that it can make an evaluation of partial discharge handling in outgoing cable insulation.

scholarly journals Uncertainty of factor Z in gravimetric volume measurement

ACTA IMEKO ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 198
Author(s):  
Mar Lar Win
Keyword(s):  
Measurement Method ◽  
Volume Measurement ◽  
Liquid Volume ◽  
Combined Effects ◽  
Apparent Mass ◽  
Mass Measurements ◽  
Iso Standards ◽  
Uncertainty Calculation ◽  
Measurement Results

<p class="Abstract">In the gravimetric volume measurement method, the factor <em>Z</em> is generally used to facilitate an easy conversion from the apparent mass obtained using a balance to the liquid volume. The uncertainty of the measurement used for the liquid volume can be divided into two specific contributions: one from the components related to the mass measurements and one from those related to the mass-to-volume conversion. However, some ISO standards and calibration guides have suggested that the uncertainty due to the factor <em>Z</em> is generally neglected in the uncertainty calculation pertaining to gravimetric volume measurement. This paper describes the combined effects of the density of the water, the density of the reference weights, and the air buoyancy on the uncertainty of factor <em>Z</em> in terms of how they subsequently affect the uncertainty of the measurement results.</p>

scholarly journals Making roundness measurement applications and control systems on the Roundness Tester Machine

2019 ◽  
Vol 63 (3) ◽  
pp. 17-21
Author(s):  
Dodi Sofyan Arief ◽  
◽  
Eko Jadmiko ◽  
Adhy Prayitno ◽  
Muftil Badri ◽  
...  
Keyword(s):  
Control Systems ◽  
Measurement Data ◽  
Rotating Speed ◽  
Center Point ◽  
Global Quality ◽  
Measurement Results ◽  
Roundness Deviation ◽  
And Control ◽  
Dial Indicator ◽  
Roundness Measurement

Dial indicator is a comparison device usually used in industrial activities, especially in production. To make measurements at this time must be supported by technology that can facilitate operators when using it and when analyzing measurement results. Involving the programme and microcontroller are a solution to developing in roundness measurement, and then the results can be more accurate or thorough between the readable values read from the measuring instrument with the actual value of varying the amount of data. Roundness application is a program that can input measurement data automatically and can do calculations directly. Then, it can display a reference circle, a table that calculates the values of X, Y, R, X’, Y’, R’, Roundness Deviation, Run out Concentricity or a shift in the center point and also the center point shift or Theta. In measuring roundness, the test object is used the Standard Mandrel which has been certified by PT. Global Quality Indonesia, by determining three points or positions, namely in the first position the amount of data is 180, in the second position the amount of data is 90 and in the third position, the amount of data is 60 with a rotating speed of 15 mm/s. The results of the reference circle can be seen in each calculation in each position, in the second position the roundness deviation values are approaching of the Mandrel.

Sign in / Sign up

Export Citation Format

Share Document