scholarly journals MANAGING GEOLOGICAL PROFILES IN DATABASES FOR 3D VISUALISATION

2016 ◽  
Vol XLII-2/W2 ◽  
pp. 115-121
Author(s):  
A. Jarna ◽  
B. O. Grøtan ◽  
I. H. C. Henderson ◽  
S. Iversen ◽  
E. Khloussy ◽  
...  
Keyword(s):  
3D Model ◽  
Three Dimensional ◽  
Mineral Resources ◽  
Marine Geology ◽  
Geological Data ◽  
Geological Structures ◽  
Use Of Data ◽  
Rock Structure ◽  
Surficial Deposits ◽  
The Web

Geology and all geological structures are three-dimensional in space. GIS and databases are common tools used by geologists to interpret and communicate geological data. The NGU (Geological Survey of Norway) is the national institution for the study of bedrock, mineral resources, surficial deposits and groundwater and marine geology. 3D geology is usually described by geological profiles, or vertical sections through a map, where you can look at the rock structure below the surface. The goal is to gradually expand the usability of existing and new geological profiles to make them more available in the retail applications as well as build easier entry and registration of profiles. The project target is to develop the methodology for acquisition of data, modification and use of data and its further presentation on the web by creating a user-interface directly linked to NGU’s webpage. This will allow users to visualise profiles in a 3D model.

scholarly journals 3-DIMENSIONAL GEOLOGICAL MAPPING AND MODELING ACTIVITIES AT THE GEOLOGICAL SURVEY OF NORWAY

2015 ◽  
Vol XL-2/W4 ◽  
pp. 11-16 ◽  
Author(s):  
A. Jarna ◽  
A. Bang-Kittilsen ◽  
C. Haase ◽  
I. H. C. Henderson ◽  
F. Høgaas ◽  
...  
Keyword(s):  
3D Visualization ◽  
Three Dimensional ◽  
Mineral Resources ◽  
Geological Mapping ◽  
Geological Survey ◽  
Marine Geology ◽  
Data Infrastructure ◽  
3 Dimensional ◽  
3D Data ◽  
Wide Range

Geology and all geological structures are three-dimensional in space. Geology can be easily shown as four-dimensional when time is considered. Therefore GIS, databases, and 3D visualization software are common tools used by geoscientists to view, analyse, create models, interpret and communicate geological data. The NGU (Geological Survey of Norway) is the national institution for the study of bedrock, mineral resources, surficial deposits and groundwater and marine geology. The interest in 3D mapping and modelling has been reflected by the increase of number of groups and researches dealing with 3D in geology within NGU. This paper highlights 3D geological modelling techniques and the usage of these tools in bedrock, geophysics, urban and groundwater studies at NGU, same as visualisation of 3D online. The examples show use of a wide range of data, methods, software and an increased focus on interpretation and communication of geology in 3D. The goal is to gradually expand the geospatial data infrastructure to include 3D data at the same level as 2D.

scholarly journals Dip angles of active faults from the surface to the seismogenic zone inferred from a 2D numerical analysis of visco-elasto-plastic models: a case study for the Osaka Plain

2021 ◽  
Vol 73 (1) ◽  
Author(s):  
Hayami Nishiwaki ◽  
Takamoto Okudaira ◽  
Kazuhiko Ishii ◽  
Muneki Mitamura
Keyword(s):  
Urban Areas ◽  
Active Faults ◽  
Three Dimensional ◽  
Seismogenic Zone ◽  
Earthquake Ground Motion ◽  
Convex Curve ◽  
Seismic Reflection Profile ◽  
Geological Structures ◽  
Dimensional Distribution ◽  
Dip Angle

AbstractThe geometries (i.e., dip angles) of active faults from the surface to the seismogenic zone are the most important factors used to evaluate earthquake ground motion, which is crucial for seismic hazard assessments in urban areas. In Osaka, a metropolitan city in Japan, there are several active faults (e.g., the Uemachi and Ikoma faults), which are inferred from the topography, the attitude of active faults in surface trenches, the seismic reflection profile at shallow depths (less than 2 km), and the three-dimensional distribution of the Quaternary sedimentary layers. The Uemachi and Ikoma faults are N–S-striking fault systems with total lengths of 42 km and 38 km, respectively, with the former being located ~ 12 km west of the latter; however, the geometries of each of the active faults within the seismogenic zone are not clear. In this study, to examine the geometries of the Uemachi and Ikoma faults from the surface to the seismogenic zone, we analyze the development of the geological structures of sedimentary layers based on numerical simulations of a two-dimensional visco-elasto-plastic body under a horizontal compressive stress field, including preexisting high-strained weak zones (i.e., faults) and surface sedimentation processes, and evaluate the relationship between the observed geological structures of the Quaternary sediments (i.e., the Osaka Group) in the Osaka Plain and the model results. As a result, we propose geometries of the Uemachi and Ikoma faults from the surface to the seismogenic zone. When the friction coefficient of the faults is ~ 0.5, the dip angles of the Uemachi and Ikoma faults near the surface are ~ 30°–40° and the Uemachi fault has a downward convex curve at the bottom of the seismogenic zone, but does not converge to the Ikoma fault. Based on the analysis in this study, the dip angle of the Uemachi fault zone is estimated to be approximately 30°–40°, which is lower than that estimated in the previous studies. If the active fault has a low angle, the width of the fault plane is long, and thus the estimated seismic moment will be large.

scholarly journals Direct 3D model extraction method for color volume images

2021 ◽  
Vol 29 ◽  
pp. 133-140
Author(s):  
Bin Liu ◽  
Shujun Liu ◽  
Guanning Shang ◽  
Yanjie Chen ◽  
Qifeng Wang ◽  
...  
Keyword(s):  
3D Model ◽  
Clinical Medicine ◽  
Three Dimensional ◽  
Laplacian Matrix ◽  
Segmentation Method ◽  
Human Organs ◽  
Model Segmentation ◽  
Treatment Objective ◽  
Organ Models ◽  
Different Parts

BACKGROUND: There is a great demand for the extraction of organ models from three-dimensional (3D) medical images in clinical medicine diagnosis and treatment. OBJECTIVE: We aimed to aid doctors in seeing the real shape of human organs more clearly and vividly. METHODS: The method uses the minimum eigenvectors of Laplacian matrix to automatically calculate a group of basic matting components that can properly define the volume image. These matting components can then be used to build foreground images with the help of a few user marks. RESULTS: We propose a direct 3D model segmentation method for volume images. This is a process of extracting foreground objects from volume images and estimating the opacity of the voxels covered by the objects. CONCLUSIONS: The results of segmentation experiments on different parts of human body prove the applicability of this method.

A comparison between the CS-TOF and the CTA/DSA for WEB device management

2021 ◽  
pp. 159101992110147
Author(s):  
Oktay Algin ◽  
Gokhan Yuce ◽  
Ural Koc ◽  
Gıyas Ayberk
Keyword(s):  
Mr Angiography ◽  
Three Dimensional ◽  
Morphological Parameters ◽  
Perfect Agreement ◽  
Device Management ◽  
Web Device ◽  
Sensing Time ◽  
The Web

Purpose There is no study on the role of three-dimensional compressed sensing time of flight MR angiography (3D-CS-TOF) in the management of the WEB device. We evaluated the efficacy of 3-tesla 3D-CS-TOF for the management and follow-up of the WEB device implantations. Materials and methods Seventy-three aneurysms of 69 patients treated with the WEB device were retrospectively examined. Morphological parameters and embolization results of the aneurysms were assessed and compared on 3D-CS-TOF, CTA, and DSA images. Results Occluded, neck remnant, and recurrent aneurysms were observed in 61 (83.6%), 7 (9.6%), and 5 (6.8%) aneurysms, respectively. Inter- and intra-reader agreement values related to aneurysm size measurements were perfect. Aneurysms size, age, and proximal vessel tortuosity were negatively correlated with the visibility of the aneurysms and parent vessels on 3D-CS-TOF images (p = 0.043; p = 0.032; p < 0.001, respectively). Subarachnoid hemorrhage and age are associated with 3D-CS-TOF artifacts (p = 0.031; p = 0.005, respectively). 3D-CS-TOF findings are in perfect agreement with DSA or CT angiography (CTA) results (p < 0.001). Conclusion According to our results, 3D-CS-TOF can be an easy, fast, and reliable alternative for the management or follow-up of WEB assisted embolization.

Simulation of Plasto-Elastohydrodynamic Lubrication in Line Contacts of Infinite and Finite Length

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Tao He ◽  
Jiaxu Wang ◽  
Zhanjiang Wang ◽  
Dong Zhu
Keyword(s):  
Surface Roughness ◽  
Finite Length ◽  
3D Model ◽  
Three Dimensional ◽  
Elastohydrodynamic Lubrication ◽  
Axial Direction ◽  
Contact Length ◽  
Line Contact ◽  
Line Contacts ◽  
3D Surface Topography

Line contact is common in many machine components, such as various gears, roller and needle bearings, and cams and followers. Traditionally, line contact is modeled as a two-dimensional (2D) problem when the surfaces are assumed to be smooth or treated stochastically. In reality, however, surface roughness is usually three-dimensional (3D) in nature, so that a 3D model is needed when analyzing contact and lubrication deterministically. Moreover, contact length is often finite, and realistic geometry may possibly include a crowning in the axial direction and round corners or chamfers at two ends. In the present study, plasto-elastohydrodynamic lubrication (PEHL) simulations for line contacts of both infinite and finite length have been conducted, taking into account the effects of surface roughness and possible plastic deformation, with a 3D model that is needed when taking into account the realistic contact geometry and the 3D surface topography. With this newly developed PEHL model, numerical cases are analyzed in order to reveal the PEHL characteristics in different types of line contact.

Facial reconstruction project

1970 ◽  
Vol 80 (1) ◽  
Author(s):  
Federico Cesarani ◽  
Maria Cristina Martina ◽  
Valter Capussotto ◽  
Andrea Giuliano ◽  
Renato Grilletto ◽  
...  
Keyword(s):  
3D Model ◽  
Multidetector Ct ◽  
Three Dimensional ◽  
Facial Reconstruction ◽  
Digital Data ◽  
Egyptian Mummy ◽  
Ancient Egyptian ◽  
Synthetic Materials ◽  
Reconstruction Project

Facial reconstruction of mummies and corpses is important in anthropological, medical and forensic studies. The purpose of our study was to evaluate the role of three- Dimensional Multidetector CT examination for 3D facial reconstruction. We present a multidisciplinary work performed by radiologists, anthropologists and forensic police in reconstructing the possible physiognomy of an ancient Egyptian mummy. Three-Dimensional data were obtained from a well-preserved completely wrapped Egyptian mummy from the collection of the Egyptian Museum in Torino, Italy, dated from XXII or XXIII dynasty (945-715 BC). Data were used as a model for the rapid prototyping stereolithographic technique, a method which allows the creation of 3D model with digital data using synthetic materials such as resin or nylon.

Algorithm to Reduce Leading and Lagging in Conformal Direct-Print

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Morteza Vatani ◽  
Faez Alkadi ◽  
Jae-Won Choi
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
3D Model ◽  
Three Dimensional ◽  
Motion Direction ◽  
B Spline ◽  
And Topology ◽  
Printing System ◽  
3D Printed ◽  
Printed Patterns

A novel additive manufacturing algorithm was developed to increase the consistency of three-dimensional (3D) printed curvilinear or conformal patterns on freeform surfaces. The algorithm dynamically and locally compensates the nozzle location with respect to the pattern geometry, motion direction, and topology of the substrate to minimize lagging or leading during conformal printing. The printing algorithm was implemented in an existing 3D printing system that consists of an extrusion-based dispensing module and an XYZ-stage. A dispensing head is fixed on a Z-axis and moves vertically, while the substrate is installed on an XY-stage and moves in the x–y plane. The printing algorithm approximates the printed pattern using nonuniform rational B-spline (NURBS) curves translated directly from a 3D model. Results showed that the proposed printing algorithm increases the consistency in the width of the printed patterns. It is envisioned that the proposed algorithm can facilitate nonplanar 3D printing using common and commercially available Cartesian-type 3D printing systems.

Three-Dimensional Engineering Geology Data Warehouse Constructed by Power Designer

2013 ◽  
Vol 753-755 ◽  
pp. 3112-3115
Author(s):  
Jing Li Huang ◽  
Qing Wang ◽  
Qiu Ling Lang
Keyword(s):  
Data Base ◽  
Data Warehouse ◽  
Data Model ◽  
Engineering Geology ◽  
Three Dimensional ◽  
Soil Mass ◽  
Design Model ◽  
Underground Space ◽  
Geological Data ◽  
Rock And Soil

The Three-dimensional engineering geology data warehouse is constructed by Power Desinger16.1, with the theme as the rock and mass availability in urban underground space, and with the source data as the borehole data of engineering Investigation. Use the Model-driven Architecture method, reverse engineer the Access data base, extract existed data model, combine research theme to construct the Star data structure model. And check the SQL script in SQL Server2005, to ensure normal operation. 0 Forewords The traditional transaction-oriented designed engineering geology data base has the function to storage original data from work, to draw of geological section and to provide simple check and analysis, but without the decision support function in view of a subject. The purpose of construction a 3D engineering geological data warehouse is to build a decision support system in view of availability of rock and soil mass in urban underground space. Based on the data extraction, data integration, data cleaning and data transformation, the 3D engineering geological data warehouse could achieve the integrated management of massive geological data and to provide reliable data source for the rock and soil mass utilization system in urban underground space. The main feature of 3D engineering geological data base is subject-oriented, integrated, time-varying, relatively stable, and is magnanimous collection of engineering geological spatial data and attribute data. According to the design pattern of traditional data base, the construction of 3D engineering geological data warehouse can be divided into three stages: concept design model, logic design model and physical design model. But the 3D engineering geological data warehouse exist iterative in the construction process. Currently, there are many CASE tools to help developers quickly achieving the data base design, such as Rational Rose by Rational company, Erwin and Bpwin by CA company, Power Designer by Sybase company, Office Visio by Microsoft company, and Oracle Designer by Oracle company. The paper uses the Powerdesigner16.1 to achieve the logical data model (LDM) and physical data model (PDM).

Segregation Patterns and the Phase-Field 3D-Model for Adiabatic Phase Transition in Al-Cu Alloys

2013 ◽  
Vol 668 ◽  
pp. 870-874
Author(s):  
Heng Min Ding ◽  
Tie Qiao Zhang ◽  
Lv Chun Pu
Keyword(s):  
Dendritic Growth ◽  
3D Model ◽  
Three Dimensional ◽  
Cartesian Grid ◽  
Solute Diffusion ◽  
Solute Redistribution ◽  
Cu Alloys ◽  
Solid Phases ◽  
Solid Liquid ◽  
Liquid And Solid Phases

In the paper, a model basing on solute conservative in every unit is developed for solving the solute diffusion equation during solidification. The model includes time-dependent calculations for temperature distribution, solute redistribution in the liquid and solid phases. Three-dimensional computations are performed for Al-Cu dendritic growth into an adiabatic and highly supersaturated liquid phase. A numerical algorithm was developed to explicitly track the sharp solid/liquid (S/L) interface on a fixed Cartesian grid. Three-dimensional mesoscopic calculations were performed to simulate the evolution of equiaxed dendritic morphologies.

scholarly journals Dynamic modeling of tunnel survey spatiotemporal data

2014 ◽  
Vol 20 (2) ◽  
pp. 354-375
Author(s):  
Xiaolong Li ◽  
Jiansi Yang ◽  
Bingxuan Guo ◽  
Hua Liu ◽  
Jun Hua
Keyword(s):  
Survey Data ◽  
Cross Section ◽  
Cross Sections ◽  
3D Modeling ◽  
3D Model ◽  
Three Dimensional ◽  
Spatiotemporal Data ◽  
Excavation Process ◽  
Special Cases ◽  
Time Stamps

Currently, for tunnels, the design centerline and design cross-section with time stamps are used for dynamic three-dimensional (3D) modeling. However, this approach cannot correctly reflect some qualities of tunneling or some special cases, such as landslips. Therefore, a dynamic 3D model of a tunnel based on spatiotemporal data from survey cross-sections is proposed in this paper. This model can not only playback the excavation process but also reflect qualities of a project typically missed. In this paper, a new conceptual model for dynamic 3D modeling of tunneling survey data is introduced. Some specific solutions are proposed using key corresponding technologies for coordinate transformation of cross-sections from linear engineering coordinates to global projection coordinates, data structure of files and database, and dynamic 3D modeling. A 3D tunnel TIN model was proposed using the optimized minimum direction angle algorithm. The last section implements the construction of a survey data collection, acquisition, and dynamic simulation system, which verifies the feasibility and practicality of this modeling method.

Sign in / Sign up

Export Citation Format

Share Document