EFFECT OF IONIC LIQUID MODIFIED MWCNT ON THE RHEOLOGICAL AND MICROSTRUCTURAL DEVELOPMENTS IN STYRENE BUTADIENE RUBBER NANOCOMPOSITES

2019 ◽  
Vol 92 (3) ◽  
pp. 531-545
Author(s):  
Jiji Abraham ◽  
Ajesh K. Zachariah ◽  
Runcy Wilson ◽  
Rigoberto Ibarra-Gómez ◽  
Rene Muller ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Large Strain ◽  
Three Dimensional ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Multiwalled Carbon ◽  
Nonlinear Viscoelastic ◽  
Roll Mill ◽  
Styrene Butadiene

ABSTRACT Ionic liquid modified multiwalled carbon nanotube (MWCNT) based styrene–butadiene rubber (SBR) nanocomposites were prepared with the two-roll mill mixing method, and the rheological measurements were used to study the dispersion of MWCNTs on a microscopic scale and its compatibility with the SBR matrix. Viscous liquid-like rheological behavior at low MWCNT loadings and pseudo-solid-like rheological response at high MWCNT loadings were observed, showing the gradual transformation from individual structures of MWCNTs to polymer bridged MWCNT networks. A decrease in the mobility of SBR macromolecular chains by the geometric confinement of three-dimensional networks of MWCNTs further confirms the interdeveloped pseudo-solid behavior of filled composites. Dynamic viscoelasticity data have been compared with the theoretical Carreau–Yasuda equation. Transmission electron microscopy of the samples reveals that MWCNTs are randomly dispersed in the rubber matrix. Finally the nature of the filler association and its role in the nonlinear viscoelastic properties at large strain amplitudes were investigated.

ELASTOMER COMPOSITES BASED ON CARBON NANOTUBES AND IONIC LIQUID

2013 ◽  
Vol 86 (3) ◽  
pp. 367-400 ◽  
Author(s):  
Kalaivani Subramaniam ◽  
Amit Das ◽  
Klaus Werner Stöckelhuber ◽  
Gert Heinrich
Keyword(s):  
Carbon Nanotubes ◽  
Ionic Liquid ◽  
Tensile Modulus ◽  
Styrene Butadiene Rubber ◽  
Coupling Agents ◽  
Butadiene Rubber ◽  
Roll Mill ◽  
Elastomer Composites ◽  
Styrene Butadiene ◽  
Nonpolar Solution

ABSTRACT Carbon nanotubes (CNTs) are known for excellent electrical conductivity and high elastic modulus. But difficulties arise in realizing their potential in matrices due to their existence in the form of aggregates or agglomerates. A simplified mixing technique using ionic liquid (IL) was developed to improve the dispersion of CNTs in elastomers. At first, CNTs were modified using an IL, 1-butyl-3-methyl-imidazolium-bis-(trifluoromethylsulfonyl)-imide in a mortar and pestle, and later, the modified tubes were incorporated into elastomers using a two-roll mill. The effect of modified tubes and IL on polar polychloroprene and nonpolar solution styrene butadiene rubber is studied. Enhanced dispersion and networking of CNTs can be achieved using this technique, based on which highly conducting composites were developed. Moreover, the composites with modified CNTs exhibited higher mechanical properties (tensile modulus, hardness) and thermal stability than the composites with unmodified CNTs. ILs are also found to have multifunctional roles (as antioxidants, as coupling agents) in the composites. The applications of composites with a particular focus on actuators and sensors are also discussed.

scholarly journals Hybrid Silica-Based Fillers in Nanocomposites: Influence of Isotropic/Isotropic and Isotropic/Anisotropic Fillers on Mechanical Properties of Styrene-Butadiene (SBR)-Based Rubber

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2413
Author(s):  
Mariapaola Staropoli ◽  
Vincent Rogé ◽  
Enzo Moretto ◽  
Joffrey Didierjean ◽  
Marc Michel ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silica Nanoparticles ◽  
Synergetic Effect ◽  
Mechanical Analysis ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Precipitated Silica ◽  
Scanning Transmission ◽  
Styrene Butadiene

The improvement of mechanical properties of polymer-based nanocomposites is usually obtained through a strong polymer–silica interaction. Most often, precipitated silica nanoparticles are used as filler. In this work, we study the synergetic effect occurring between dual silica-based fillers in a styrene-butadiene rubber (SBR)/polybutadiene (PBD) rubber matrix. Precipitated Highly Dispersed Silica (HDS) nanoparticles (10 nm) have been associated with spherical Stöber silica nanoparticles (250 nm) and anisotropic nano-Sepiolite. By imaging filler at nano scale through Scanning Transmission Electron Microscopy, we have shown that anisotropic fillers align only in presence of a critical amount of HDS. The dynamic mechanical analysis of rubber compounds confirms that this alignment leads to a stiffer nanocomposite when compared to Sepiolite alone. On the contrary, spherical 250 nm nanoparticles inhibit percolation network and reduce the nanocomposite stiffness.

Particle Size, Structure and Powdering Process of Calcium Carbonate Nanoparticles Filled Powdered Styrene-Butadiene Rubber

2011 ◽  
Vol 415-417 ◽  
pp. 237-242
Author(s):  
Zhou Da Zhang ◽  
Xue Mei Chen ◽  
Guo Liang Qu
Keyword(s):  
Particle Size ◽  
Calcium Carbonate ◽  
Size Structure ◽  
Average Diameter ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Particle Structure ◽  
Styrene Butadiene ◽  
New Particles

Calcium carbonate nanoparticles (nano-CaCO3) filled powdered styrene-butadiene rubber (P(SBR/CaCO3) was prepared by adding nano-CaCO3 particles, encapsulant and coagulant to styrene-butadiene rubber (SBR) latex by coacervation, and the particle size distribution, structure were studied. Scanning electron microscopy (SEM) was used to investigate the (P(SBR/CaCO3) particle structure, and a powdering model was proposed to describe the powdering process. The process includes: (i) the latex particles associated with the dispersed nano-CaCO3 particles (adsorption process) to form “new particles” and (ii) the formation of P(SBR/CaCO3) by coagulating “new particles”. The SEM results also shown that the nano-CaCO3 and rubber matrix have formed a macroscopic homogenization in the (P(SBR/CaCO3) particles and nano-CaCO3 dispersed uniformly in the rubber matrix with an average diameter of approximately 50 nm.

scholarly journals Influence of Eco-Friendly Processing Aids on Silica-Based Rubber Composites

2020 ◽  
Vol 10 (20) ◽  
pp. 7244
Author(s):  
Sung Ho Song
Keyword(s):  
Mechanical Properties ◽  
Rolling Resistance ◽  
Fatigue Properties ◽  
Rubber Matrix ◽  
Styrene Butadiene Rubber ◽  
Butadiene Rubber ◽  
Rubber Composites ◽  
Dispersing Agent ◽  
Styrene Butadiene ◽  
Processing Aids

As eco-friendly “green tires” are being developed in the tire industry, conventionally used carbon black is being replaced with silica in rubber compounds. Generally, as a lubricant and dispersing agent, processing aids containing zinc ions have been employed as additives. However, as zinc is a heavy metal, alternative eco-friendly processing aids are required to satisfy worldwide environmental concerns. Furthermore, non-toxic, degradable, and renewable processing aids are required to improve the mechanical properties of the rubber composites. In this study, we evaluated the effects of diverse silica-based processing aids containing hydrocarbon, benzene, and hydroxyl functional groups on the mechanical properties of rubber composites. Among them, rubber composites that used amphiphilic terpene phenol resin (TPR) with hydrophilic silica showed compatibility with the hydrophobic rubber matrix and were revealed to improve the mechanical and fatigue properties. Furthermore, owing to the enhanced dispersion of silica in the rubber matrix, the TPR/styrene butadiene rubber composites exhibited enhanced wet grip and rolling resistance. These results indicated that TPR had multifunctional effects at low levels and has the potential for use as a processing aid in silica-based rubber composites in tire engineering applications.

Sign in / Sign up

Export Citation Format

Share Document