Ru(III) Complexes of Phenoxy-İmine Ligands: Synthesis, Characterisation and Testing as Oxidation Catalysts

2019 ◽  
Vol 41 (5) ◽  
pp. 758-758
Author(s):  
Ali apan Ali apan ◽  
G khan Ceyhan and Mehmet S nmez G khan Ceyhan and Mehmet S nmez
Keyword(s):  
Nmr Spectra ◽  
Catalytic Effect ◽  
Tetradentate Ligands ◽  
Epoxidation Reaction ◽  
Substrate Conversion ◽  
Ru Complexes ◽  
Ft Ir ◽  
Imine Ligands ◽  
Very High ◽  
Catalytic Performances

A series of new mononuclear Ru(III) complexes bearing phenoxy-imine Schiff base tetradentate ligands (phenylimino, 4-chlore phenylimino, 3,4-dichlore phenylimino) have been prepared and characterized by elemental analysis, TGA, UV-VIS, FT-IR, 1H-NMR and 13C NMR spectra. The proposed structure of the ligands have a O2N2 core to form mononuclear Ru (III) complexes. Preliminary studies on the catalytic performances of the compounds in the cycloalkane oxydation are described. The catalytic effect of all Ru complexes results in the epoxidation reaction of cyclohexane, as shown in the substrate conversion reaction appears to be very high.

Preparation and Catalytic Properties of Zn-HMS Molecular Sieves

2012 ◽  
Vol 560-561 ◽  
pp. 300-304 ◽  
Author(s):  
Guang Jian Wang ◽  
Na Zeng
Keyword(s):  
Ambient Temperature ◽  
Molecular Sieves ◽  
Catalytic Effect ◽  
Catalytic Properties ◽  
Zinc Content ◽  
Catalytic Performance ◽  
Zinc Source ◽  
Ft Ir ◽  
Zinc Sources ◽  
Catalytic Performances

Znic-containing mesoporous HMS (Zn-HMS) with various znic contents were synthesized by using netural dodecylamine(DDA) as template at ambient temperature and characterized by means of XRD, FT-IR and TEM. The catalytic performance of Zn-HMS was evaluated by the oxidation of thiophene, and the influences of the zinc content and zinc source on the catalytic performances of the samples were studied. It was observed that a limited content of zinc can be incorporated into the siliciate framework of HMS and appropriate amount of zinc incorporated would promote the formation of the typical wormhole-like structure of HMS and exhibited high catalytic properties while excessive zinc incorporated would destroy the structure. Besides, for all the zinc sources, the samples synthesized from Zn(NO3) 2 have better catalytic effect, and it is benefical for zinc incorporating.

Probing Inclusion Complexes of Pentoxifylline and Pralidoxim inside Cyclic Oligosaccharides by Physicochemical Methodologies

2019 ◽  
Vol 233 (8) ◽  
pp. 1109-1127
Author(s):  
Biraj Kumar Barman ◽  
Kanak Roy ◽  
Mahendra Nath Roy
Keyword(s):  
Surface Tension ◽  
Free Energy ◽  
Inclusion Complexes ◽  
Apparent Molar Volume ◽  
Nmr Spectra ◽  
Drug Delivery Systems ◽  
Surface Tension Data ◽  
H Nmr ◽  
Ft Ir ◽  
Inclusion Phenomena

Abstract Structurally different Molecules namely Pentoxifylline and Pralidoxim were chosen along with α-cyclodextrin and β-cyclodextrin to study host-guest inclusion phenomena. The formations of host guest inclusion complexes were confirmed by studying 1H-NMR spectra, FT-IR spectra, apparent molar volume and viscosity co-efficient. The stabilities of inclusion complexes were compared calculating the binding constant from UV-VIS spectroscopic study. The 1:1 stoichiometry of the inclusion complexes were also determined by analysing the Jobs plot and surface tension data. The values for Gibbs’ free energy were found negative for both the processes. Based on all the above experiments the inclusion processes were found feasible for both the compounds. These types of inclusion complexes are of high interest in the field of research and industry as these are used as drug delivery systems.

MECHANICAL PULPING: Characterization of dissolving pulp by multivariate data analysis of FT-IR and NMR spectra

2011 ◽  
Vol 26 (4) ◽  
pp. 398-409 ◽  
Author(s):  
Peter Strunk ◽  
Tommy Ö Öman ◽  
Mattias Hedenström ◽  
Bertil Eliasson ◽  
András Gorzsás
Keyword(s):  
Data Analysis ◽  
Multivariate Data Analysis ◽  
Nmr Spectra ◽  
Multivariate Data ◽  
Dissolving Pulp ◽  
Ir And Nmr Spectra ◽  
Ft Ir

An Efficient Ultrasonic-Assisted Synthesis and Nonlinear Optical Property of Donor (D) -π-Acceptor (A) Chalcone (DDFP)

2020 ◽  
Vol 234 (1) ◽  
pp. 145-152
Author(s):  
M. A. N. Razvi ◽  
S. M. Afzal ◽  
Salman A. Khan ◽  
Ahmed H. Bakry
Keyword(s):  
Nonlinear Optical ◽  
Nonlinear Optical Property ◽  
Limiting Behavior ◽  
Ultrasonic Assisted ◽  
Ion Laser ◽  
Ft Ir ◽  
Scan Data ◽  
Argon Ion ◽  
Very High ◽  
C Nmr

Abstract3-(3,4-dimethoxyphenyl)-1-(2,5-dimethylfuran-3-yl)prop-2-en-1-one (DDFP), is prepared by the equimolar ratio of 1-(2,5-dimethylfuran)ethan-1-one and 3,4, dimethoxy benzaldehyde under ultrasonic irradiation. Structure of DDFP was established by the FT-IR, 1H and 13C-NMR spectroscopic methods and elemental analysis. The nonlinear optical properties of this dye using the z-scan technique with a cw argon ion laser at 514.5 nm are studied. Both the closed and open aperture z-scan data is used to estimate the nonlinear refractive index n2 and the nonlinear absorption coefficient β respectively. The measurements are carried out at five concentrations as well as at five laser powers. The values obtained are relatively very high and vary linearly with concentration. The studies on optical limiting behavior of this dye are also reported here.

Synthesis of a Polysiloxane with High Reaction Activity

2014 ◽  
Vol 998-999 ◽  
pp. 15-18
Author(s):  
Сhao Hong Dong ◽  
Zhou Lu ◽  
Ping Zhu ◽  
Lei Wang
Keyword(s):  
Organic Synthesis ◽  
Methyl Iodide ◽  
Building Block ◽  
Nmr Spectra ◽  
Catalytic Amount ◽  
Reaction Conditions ◽  
Ir And Nmr Spectra ◽  
High Reaction ◽  
Ft Ir

A novel building block in organic synthesis, poly (4-iodobutoxylmethylsiloxane)(PIBMS) with high reaction activity was prepared by poly (hydromethylsiloxane)(PHMS), methyl iodide and tetrahydrofuran (THF) in the presence of a catalytic amount of PdCl2. The structure of PIBMS was characterized by the FT-IR and NMR spectra. The reaction conditions were optimized.

Thermo-mechanical and surface properties of POSS reinforced structurally different diamine cured epoxy nanocomposites

RSC Advances ◽  
2014 ◽  
Vol 4 (85) ◽  
pp. 45433-45441 ◽  
Author(s):  
K. Sethuraman ◽  
P. Prabunathan ◽  
M. Alagar
Keyword(s):  
Bisphenol A ◽  
Surface Properties ◽  
Nmr Spectra ◽  
Epoxy Nanocomposites ◽  
H Nmr ◽  
Ft Ir ◽  
C Nmr

In the present study three structurally different diamines namely bisphenol-A based ether diamine, octane diol based ether diamine, and capron based diamine were synthesized and characterized using FT-IR, 1H-NMR and 13C-NMR spectra.

scholarly journals The effect of alkali metal ions on the electronic structure ofp-anisic acid1

2010 ◽  
Vol 24 (5) ◽  
pp. 449-459 ◽  
Author(s):  
M. Kalinowska ◽  
R. Świsłocka ◽  
E. Regulska ◽  
W. Lewandowski
Keyword(s):  
Metal Ions ◽  
Nmr Spectra ◽  
Alkali Metal Ions ◽  
Electronic Charge ◽  
Sodium Potassium ◽  
Electronic Charge Distribution ◽  
Anisic Acid ◽  
Ft Ir ◽  
C Nmr ◽  
Ft Raman

FT-IR (in solid state and solution), FT-Raman, UV and1H,13C NMR spectra of p-methoxybenzoic (p-anisic) acid and lithium, sodium, potassium, rubidium and caesiump-methoxybenzoates (p-anisates) were registered, assigned and analyzed. The structures of anisic acid and Li, Na and Kp-anisates were optimised at the B3LYP/6-311++G** level. The IR spectra and NPA, ChelpG and MK atomic charges were calculated. The effect of metal ions on the electronic charge distribution in ligand was discussed.

Synthesis of 5-Acetylacenaphthene Using Silica-Supported Phosphotungstic Heteropoly Acid as an Efficient and Reusable Catalyst

2012 ◽  
Vol 560-561 ◽  
pp. 214-220
Author(s):  
Ai Xia Pan ◽  
Yin Yin Wu ◽  
Yu Fang ◽  
Lu Lu Xu ◽  
Min Chen
Keyword(s):  
Catalytic Activity ◽  
1H Nmr ◽  
Nmr Spectra ◽  
Benzoyl Chloride ◽  
Heteropoly Acid ◽  
Environmentally Benign ◽  
Reusable Catalyst ◽  
Acylation Reaction ◽  
Experimental Parameters ◽  
Ft Ir

To obtain new fine chemical and intermediate of functional polymer material, the acylation of acenaphthene with benzoyl chloride to 5-acetylacenaphthene catalyzed by silica-supported phosphotungstic heteropoly acid (PW/SiO2) was investigated. Pure 5-acetylacenaphthene was obtained and its structure was identified by GC/MS, FT-IR and 1H NMR spectra. The effects of experimental parameters on the catalytic acylation reaction and the possibility of reusability of PW/SiO2 catalyst were studied. Under optimun conditions, the yield and the selectivity of 5-acetylacenaphthene were up to 81.3 % and 93.6 %, respectively. PW/SiO2 shows well catalytic activity after running for 5 times. The experimental results indicate that PW/SiO2 is a recyclable and environmentally benign catalyst in the synthesis of 5-acetylacenaphthene.

scholarly journals Preparation and Characterization of Styrene Bearing Diethanolamine Side Group, Styrene Copolymer Systems, and Their Metal Complexes

2018 ◽  
Vol 2018 ◽  
pp. 1-15 ◽  
Author(s):  
Aslışah Açıkses ◽  
Necmittin Çömez ◽  
Fatih Biryan
Keyword(s):  
Free Radical ◽  
Electrical Properties ◽  
Metal Complexes ◽  
Nmr Spectra ◽  
Side Group ◽  
Conductivity Measurements ◽  
H Nmr ◽  
Ft Ir ◽  
Polymerization Method

The two copolymer systems of styrene bearing diethanol amine side group and styrene were prepared by free radical polymerization method at 60°C in presence of 1,4-dioxane as solvent and AIBN as initiator. Their metal complexes were prepared by reaction of the copolymer used as ligand P(DEAMSt-co-St)L′′ and Ni(II) and Co(II) metal ions, which was carried out in presence of ethanol and NaOH at 65°C for 48 h in pH = 7.5. The structures of the copolymers used as ligand and metal complexes were identified by FT-IR, 1H-NMR spectra, and elemental analysis. The properties of the copolymers used as ligand and metal complexes were characterized by SEM-EDX, AAS, DSC, TGA, and DTA techniques. Then, the electrical properties of the copolymers and metal complexes were examined as a function of the temperature and frequency, and the activation energies (Ea) were estimated with conductivity measurements.

Sign in / Sign up

Export Citation Format

Share Document