DESIGN AND DEVELOPMENT OF REGENERATIVE DAMPERS

2022 ◽  
Vol 2 (1) ◽  
pp. 406-410
Author(s):  
Aditya Singh ◽  
Manish Thakur ◽  
Akshat shah ◽  
Neerake Bajaj ◽  
Hardik Taneja ◽  
...  
Keyword(s):  
Magnetic Flux ◽  
Electric Vehicle ◽  
Feedback Loop ◽  
Mechanical Energy ◽  
Cost Effective ◽  
The Other ◽  
Minimal Cost ◽  
Cost Increase ◽  
Suspension Systems ◽  
On Demand

Each and every automobile in service or being developed in the industry is benchmarked on the basis of its efficiency in running real conditions. So in our project here we have tried to develop a complete new damper and spring setup which can be used in all sorts of suspension systems and in turn provides a feedback loop of voltage which can then be used charge the batteries and upscale the efficiency of bikes by (5-6)% & and for HUV or Sedans by (2-4)% (can even go higher) depending on the terrain. In this setup we harness the mechanical energy into electrical where earlier it was left as heat and vibrational losses. This setup is as cost effective as the earlier dampers where as providing an efficient output in minimal cost increase due to its novelty. The other Features include Electronic height adjustment & on demand suspension softness or stiffness. Keywords: Dampers, Automobile, Electromagnet, EV (Electric vehicle), Voltage, Magnetic flux, Suspension

scholarly journals Cost-effective Analysis of Proton Pump Inhibitors in Long-term Management of Gastroesophageal Reflux Disease: A Narrative Review

2019 ◽  
Vol 55 (5) ◽  
pp. 292-305
Author(s):  
Shazia Jamshed ◽  
Akshaya Srikanth Bhagavathula ◽  
Sheikh Muhammad Zeeshan Qadar ◽  
Umaira Alauddin ◽  
Sana Shamim ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Gastroesophageal Reflux Disease ◽  
Cost Effective ◽  
The Other ◽  
Cost Effectiveness Ratio ◽  
On Demand ◽  
Step Down ◽  
The Cost ◽  
Term Management

Background: Gastroesophageal reflux disease (GERD) is a common gastrointestinal disorder that results from regurgitation of acid from the stomach into the esophagus. Treatment available for GERD includes lifestyle changes, antacids, histamine-2 receptor antagonists (H2RAs), proton pump inhibitors (PPIs), and anti-reflux surgery. Aim: The aim of this review is to assess the cost-effectiveness of the use of PPIs in the long-term management of patients with GERD. Method: We searched in PubMed to identify related original articles with close consideration based on inclusion and exclusion criteria to choose the best studies for this narrative review. The first section compares the cost-effectiveness of PPIs with H2RAs in long-term heartburn management. The other sections shall only discuss the cost-effectiveness of PPIs in 5 different strategies, namely, continuous (step-up, step-down, and maintenance), on-demand, and intermittent therapies. Results: Of 55 articles published, 10 studies published from 2000 to 2015 were included. Overall, PPIs are more effective in relieving heartburn in comparison with ranitidine. The use of PPIs in managing heartburn in long-term consumption of nonsteroidal anti-inflammatory drug (NSAID) has higher cost compared with H2RA. However, if the decision-maker is willing to pay more than US$174 788.60 per extra quality-adjusted life year (QALY), then the optimal strategy is traditional NSAID (tNSAID) and PPIs. The probability of being cost-effective was also highest for NSAID and PPI co-therapy users. On-demand PPI treatment strategy showed dominant with an incremental cost-effectiveness ratio of US$2197 per QALY gained and was most effective and cost saving compared with all the other treatments. The average cost-effectiveness ratio was lower for rabeprazole therapy than for ranitidine therapy. Conclusion: Our review revealed that long-term treatment with PPIs is effective but costly. To achieve long-term cost-effective approach, we recommend on-demand approach to treat heartburn symptoms, but if the symptoms persist, treatment with continuous step-down therapy should be applied.

2D Color-Intensity Representation of Ultrasonic Thickness Gauge Measurements

2020 ◽  
pp. 1192-1198
Author(s):  
M.S. Mohammad ◽  
Tibebe Tesfaye ◽  
Kim Ki-Seong
Keyword(s):  
Cost Effective ◽  
The Other ◽  
Thickness Gauge ◽  
Color Intensity ◽  
Digital Readout ◽  
Flat Surfaces ◽  
Video Cameras ◽  
Wide Range ◽  
Cost Effective Alternative ◽  
Ultrasonic Thickness

Ultrasonic thickness gauges are easy to operate and reliable, and can be used to measure a wide range of thicknesses and inspect all engineering materials. Supplementing the simple ultrasonic thickness gauges that present results in either a digital readout or as an A-scan with systems that enable correlating the measured values to their positions on the inspected surface to produce a two-dimensional (2D) thickness representation can extend their benefits and provide a cost-effective alternative to expensive advanced C-scan machines. In previous work, the authors introduced a system for the positioning and mapping of the values measured by the ultrasonic thickness gauges and flaw detectors (Tesfaye et al. 2019). The system is an alternative to the systems that use mechanical scanners, encoders, and sophisticated UT machines. It used a camera to record the probe’s movement and a projected laser grid obtained by a laser pattern generator to locate the probe on the inspected surface. In this paper, a novel system is proposed to be applied to flat surfaces, in addition to overcoming the other limitations posed due to the use of the laser projection. The proposed system uses two video cameras, one to monitor the probe’s movement on the inspected surface and the other to capture the corresponding digital readout of the thickness gauge. The acquired images of the probe’s position and thickness gauge readout are processed to plot the measured data in a 2D color-coded map. The system is meant to be simpler and more effective than the previous development.

The Propaganda Feedback Loop

2018 ◽  
Author(s):  
Yochai Benkler ◽  
Robert Faris ◽  
Hal Roberts
Keyword(s):  
Case Studies ◽  
Feedback Loop ◽  
The Other ◽  
Hillary Clinton ◽  
Donald Trump ◽  
The Public ◽  
False Reporting ◽  
Media Ecosystem ◽  
Crowd Out ◽  
Selection Of

This chapter presents a model of the interaction of media outlets, politicians, and the public with an emphasis on the tension between truth-seeking and narratives that confirm partisan identities. This model is used to describe the emergence and mechanics of an insular media ecosystem and how two fundamentally different media ecosystems can coexist. In one, false narratives that reinforce partisan identity not only flourish, but crowd-out true narratives even when these are presented by leading insiders. In the other, false narratives are tested, confronted, and contained by diverse outlets and actors operating in a truth-oriented norms dynamic. Two case studies are analyzed: the first focuses on false reporting on a selection of television networks; the second looks at parallel but politically divergent false rumors—an allegation that Donald Trump raped a 13-yearold and allegations tying Hillary Clinton to pedophilia—and tracks the amplification and resistance these stories faced.

scholarly journals Development of a Genoserotyping Method for Salmonella Infantis Detection on the Basis of Pangenome Analysis

2020 ◽  
Vol 9 (1) ◽  
pp. 67
Author(s):  
Seung-Min Yang ◽  
Jiwon Baek ◽  
Eiseul Kim ◽  
Hyeon-Be Kim ◽  
Seyoung Ko ◽  
...  
Keyword(s):  
Public Health ◽  
Polymerase Chain Reaction ◽  
Bacterial Species ◽  
Cost Effective ◽  
The Other ◽  
Gene Marker ◽  
Diagnostic Assay ◽  
Chain Reaction ◽  
Polymerase Chain ◽  
Substantial Economic Burden

In recent years, Salmonella Infantis has become a predominant serovariant in clinical and poultry isolates, thereby imposing a substantial economic burden on both public health and the livestock industry. With the aim of coping with the steep increase in serovar Infantis prevalence, a polymerase chain reaction (PCR)-based rapid and accurate diagnostic assay was developed in this study through pangenome profiling of 60 Salmonella serovars. A gene marker, SIN_02055, was identified, which is present in the S. Infantis genome but not in the pangenome of the other serovars. Primers specific to SIN_02055 were used to accurately detect serovar Infantis, and to successfully differentiate Infantis from the other 59 serovars in real-time PCR with a R2 of 0.999 and an efficiency of 95.76%. The developed method was applied to 54 Salmonella strains belonging to eight dominant serovars, and distinguished Infantis from the other seven serovars with an accuracy of 100%. The diagnostic primer set also did not show false positive amplification with 32 strains from eight non-Salmonella bacterial species. This cost-effective and rapid method can be considered an alternative to the classic serotyping using antisera.

scholarly journals Assessment of Live Candidate Vaccines for Paratuberculosis in Animal Models and Macrophages

2009 ◽  
Vol 78 (3) ◽  
pp. 1383-1389 ◽  
Author(s):  
Gabriella M. Scandurra ◽  
Geoffrey W. de Lisle ◽  
Sonia M. Cavaignac ◽  
May Young ◽  
R. Pamela Kawakami ◽  
...  
Keyword(s):  
Side Effects ◽  
Bacterial Load ◽  
Economic Effect ◽  
Cost Effective ◽  
The Other ◽  
Murine Models ◽  
Initial Screening ◽  
Vaccine Candidates ◽  
Allelic Exchange ◽  
Potential Vaccine

ABSTRACT Mycobacterium avium subsp. paratuberculosis (basonym M. paratuberculosis) is the causative agent of paratuberculosis, a chronic enteritis of ruminants. To control the considerable economic effect that paratuberculosis has on the livestock industry, a vaccine that induces protection with minimal side effects is required. We employed transposon mutagenesis and allelic exchange to develop three potential vaccine candidates, which were then tested for virulence with macrophages, mice, and goats. All three models identified the WAg906 mutant as being the most attenuated, but some differences in the levels of attenuation were evident among the models when testing the other strains. In a preliminary mouse vaccine experiment, limited protection was induced by WAg915, as evidenced by a reduced bacterial load in spleens and livers 12 weeks following intraperitoneal challenge with M. paratuberculosis K10. While we found macrophages and murine models to be rapid and cost-effective alternatives for the initial screening of M. paratuberculosis mutants for attenuation, it appears necessary to do the definitive assessment of attenuation with a ruminant model.

Ixazomib (IXA), carfilzomib (CAR), elotuzumab (ELO) or daratumumab (DAR) with lenalidomide and dexamethasone (LEN+DEX) versus LEN+DEX only in relapsed/refractory multiple myeloma (R/R MM): A comparative cost-effectiveness analysis.

2021 ◽  
Vol 39 (15_suppl) ◽  
pp. 8043-8043
Author(s):  
Mavis Obeng-Kusi ◽  
Daniel Arku ◽  
Neda Alrawashdh ◽  
Briana Choi ◽  
Nimer S. Alkhatib ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Cost Effective ◽  
Cost Utility ◽  
Cost Effectiveness Analysis ◽  
The Other ◽  
Sensitivity Analyses ◽  
Treatment Comparison ◽  
Comparative Cost ◽  
Effectiveness Analysis ◽  
Life Years

8043 Background: IXA, CAR, ELO and DARin combination with LEN+DEXhave been found superior in efficacy compared to LEN+DEX in the management of R/R MM. Applying indirect treatment comparisons from a network meta-analysis (NMA), this economic evaluation aimed to estimate the comparative cost-effectiveness and cost-utility of these four triplet regimens in terms of progression-free survival (PFS). Methods: In the absence of direct treatment comparison from a single clinical trial, NMA was used to indirectly estimate the comparative PFS benefit of each regimen. A 2-state Markov model simulating the health outcomes and costs was used to evaluate PFS life years (LY) and quality-adjusted life years (QALY) with the triplet regimens over LEN+DEX and expressed as the incremental cost-effectiveness (ICER) and cost-utility ratios (ICUR). Probability sensitivity analyses were conducted to assess the influence of parameter uncertainty on the model. Results: The NMA revealed that DAR+LEN+DEX was superior to the other triplet therapies, which did not differ statistically amongst them. As detailed in the Table, in our cost-effectiveness analysis, all 4 triplet regimens were associated with increased PFSLY and PFSQALY gained (g) over LEN+DEX at an additional cost. DAR+LEN+DEX emerged the most cost-effective with ICER and ICUR of $667,652/PFSLYg and $813,322/PFSQALYg, respectively. The highest probability of cost-effectiveness occurred at a willingness-to-pay threshold of $1,040,000/QALYg. Conclusions: Our economic analysis shows that all the triplet regimens were more expensive than LEN +DEX only but were also more effective with respect to PFSLY and PFSQALY gained. Relative to the other regimens, the daratumumab regimen was the most cost-effective.[Table: see text]

On-demand synchronous audio video telemedicine visits are cost effective

2019 ◽  
Vol 37 (5) ◽  
pp. 890-894 ◽  
Author(s):  
Garrison Nord ◽  
Kristin L. Rising ◽  
Roger A. Band ◽  
Brendan G. Carr ◽  
Judd E. Hollander
Keyword(s):  
Cost Effective ◽  
On Demand ◽  
Audio Video

Self-powered magnetorheological dampers for motorcycle suspensions

2017 ◽  
Vol 232 (7) ◽  
pp. 921-935 ◽  
Author(s):  
Chao Chen ◽  
Yu Shing Chan ◽  
Li Zou ◽  
Wei-Hsin Liao
Keyword(s):  
Laboratory Testing ◽  
Ride Comfort ◽  
Mechanical Energy ◽  
The Self ◽  
Magnetorheological Damper ◽  
System Level ◽  
Magnetorheological Dampers ◽  
Suspension Systems ◽  
Magnetorheological Suspension ◽  
Self Powered

Dampers are the parts of suspensions which improve the ride comfort and the safety of vehicles including motorcycles. Magnetorheological dampers are very attractive for motorcycle suspensions, because of their controllable properties and their fast responses. Considerable energy is wasted owing to the energy dissipation by dampers encountering road irregularities and accelerating processes during everyday use of motorcycles. In addition, the current magnetorheological suspension systems depend on the power supply of batteries. Therefore, in this paper, a self-powered magnetorheological damper for motorcycle suspensions is proposed and implemented for the first time. It can convert the wasted mechanical energy into useful electrical energy to power itself. There are great merits in this such as energy saving, independence of extra batteries and less maintenance in comparison with conventional magnetorheological suspension systems, while keeping controllable performances. A customized prototype of the self-powered magnetorheological damper that is compatible with a motorcycle is developed and actually implemented in a motorcycle. Modelling for the self-powered magnetorheological damper is developed and validated by laboratory testing. Laboratory testing showed that the self-powered feature works well to generate the electrical power and to vary the magnetorheological damping force. Preliminary system-level testing showed that a self-powered magnetorheological suspension results in a better ride comfort, compared with that of a magnetorheological suspension without power generation. The results showed that implementing self-powered magnetorheological dampers in motorcycle suspensions is feasible and beneficial.

Sign in / Sign up

Export Citation Format

Share Document