scholarly journals Rearing, bird type and pre-slaughter transport conditions I. Effect on dead on arrival

2018 ◽  
Vol 16 (2) ◽  
pp. e0503 ◽  
Author(s):  
Morris Villarroel ◽  
Fernando Pomares ◽  
Miguel A. Ibáñez ◽  
Almudena Lage ◽  
Paula Martínez-Guijarro ◽  
...  
Keyword(s):  
Wind Speed ◽  
Waiting Time ◽  
Arrival Time ◽  
Daily Maximum ◽  
Transport Distance ◽  
Broiler Production ◽  
High Incidence ◽  
Commercial Broiler ◽  
One Year ◽  
Bird Weight

The transport of broilers to slaughter normally results in a small percentage of dead on arrival (DoA) but little is known about the effects of flock thinning or bird weight. A multivariable linear model was used to analyse the incidence of DoA over one year in 1,856 flocks of Ross broilers (9,188 shipments). Each flock was categorized according to broiler type (yellow-skinned females and males, white-skinned females and males and roaster females) and thinning (birds transported after thinning, remaining birds after thinning and non-thinned flocks), in addition to transport distance, waiting time, maximum and minimum daily temperatures, precipitation and maximum wind speed. The overall percentage of DoA was 0.187%. The effect of the daily maximum outside temperature on DoA was quadratic with minimum DoA at 21.5ºC. Arrival time to the slaughterhouse and waiting time increased DoA by 0.0044% and 0.0021% for every 60 min increase, respectively. DoA were higher in males (which were heavier than females), and in the flocks that were previously thinned. An interaction between thinning and bird type was found, so that DoA were higher in previously thinned flocks of male broilers and roaster females. Despite the high incidence of thinning and larger bird weight, the percentage of DoA was comparable to previous studies. This research provides one of the largest detailed analyses of DoA in commercial broiler production in the Iberian Peninsula. The models described allow to quantify how increases in temperature, transport distance, waiting time, bird weight and the practise of thinning can all increase broiler mortality.

scholarly journals Measurement of the Sea Surface Height with Airborne GNSS Reflectometry and Delay Bias Calibration

2021 ◽  
Vol 13 (15) ◽  
pp. 3014
Author(s):  
Feng Wang ◽  
Dongkai Yang ◽  
Guodong Zhang ◽  
Jin Xing ◽  
Bo Zhang ◽  
...  
Keyword(s):  
Wind Speed ◽  
Arrival Time ◽  
Elevation Angle ◽  
Satellite System ◽  
Sea Surface Height ◽  
Antenna Pattern ◽  
Sea Surface ◽  
Observation Method ◽  
Global Navigation Satellite ◽  
The Impact

Sea surface height can be measured with the delay between reflected and direct global navigation satellite system (GNSS) signals. The arrival time of a feature point, such as the waveform peak, the peak of the derivative waveform, and the fraction of the peak waveform is not the true arrival time of the specular signal; there is a bias between them. This paper aims to analyze and calibrate the bias to improve the accuracy of sea surface height measured by using the reflected signals of GPS CA, Galileo E1b and BeiDou B1I. First, the influencing factors of the delay bias, including the elevation angle, receiver height, wind speed, pseudorandom noise (PRN) code of GPS CA, Galileo E1b and BeiDou B1I, and the down-looking antenna pattern are explored based on the Z-V model. The results show that (1) with increasing elevation angle, receiver height, and wind speed, the delay bias tends to decrease; (2) the impact of the PRN code is uncoupled from the elevation angle, receiver height, and wind speed, so the delay biases of Galileo E1b and BeiDou B1I can be derived from that of GPS CA by multiplication by the constants 0.32 and 0.54, respectively; and (3) the influence of the down-looking antenna pattern on the delay bias is lower than 1 m, which is less than that of other factors; hence, the effect of the down-looking antenna pattern is ignored in this paper. Second, an analytical model and a neural network are proposed based on the assumption that the influence of all factors on the delay bias are uncoupled and coupled, respectively, to calibrate the delay bias. The results of the simulation and experiment show that compared to the meter-level bias before the calibration, the calibrated bias decreases the decimeter level. Based on the fact that the specular points of several satellites are visible to the down-looking antenna, the multi-observation method is proposed to calibrate the bias for the case of unknown wind speed, and the same calibration results can be obtained when the proper combination of satellites is selected.

Climate Conditions at Perennially Ice-Covered Lake Untersee, East Antarctica

2015 ◽  
Vol 54 (7) ◽  
pp. 1393-1412 ◽  
Author(s):  
Dale T. Andersen ◽  
Christopher P. McKay ◽  
Victor Lagun
Keyword(s):  
Wind Speed ◽  
Austral Summer ◽  
Solar Flux ◽  
East Antarctica ◽  
Daily Maximum ◽  
Mean Annual Temperature ◽  
Secondary Source ◽  
Climate Conditions ◽  
Wind Speeds ◽  
Strong Winds

AbstractIn November 2008 an automated meteorological station was established at Lake Untersee in East Antarctica, producing a 5-yr data record of meteorological conditions at the lake. This dataset includes five austral summer seasons composed of December, January, and February (DJF). The average solar flux at Lake Untersee for the four years with complete solar flux data is 99.2 ± 0.6 W m−2. The mean annual temperature at Lake Untersee was determined to be −10.6° ± 0.6°C. The annual degree-days above freezing for the five years were 9.7, 37.7, 22.4, 7.0, and 48.8, respectively, with summer (DJF) accounting for virtually all of this. For these five summers the average DJF temperatures were −3.5°, −1.9°, −2.2°, −2.6°, and −2.5°C. The maximum (minimum) temperatures were +5.3°, +7.6°, +5.7°, +4.4°, and +9.0°C (−13.8°, −12.8°, −12.9°, −13.5°, and −12.1°C). The average of the wind speed recorded was 5.4 m s−1, the maximum was 35.7 m s−1, and the average daily maximum was 15 m s−1. The wind speed was higher in the winter, averaging 6.4 m s−1. Summer winds averaged 4.7 m s−1. The dominant wind direction for strong winds is from the south for all seasons, with a secondary source of strong winds in the summer from the east-northeast. Relative humidity averages 37%; however, high values will occur with an average period of ~10 days, providing a strong indicator of the quasi-periodic passage of storms across the site. Low summer temperatures and high wind speeds create conditions at the surface of the lake ice resulting in sublimation rather than melting as the main mass-loss process.

Rehabilitation of the Institutionalized Patient: Description of a Programme and Follow-up of 60 Patients

1977 ◽  
Vol 130 (5) ◽  
pp. 484-488 ◽  
Author(s):  
G. H. B. Baker ◽  
T. J. Woods ◽  
J. A. Anderson
Keyword(s):  
Psychiatric Hospital ◽  
Social Worker ◽  
Medical Staff ◽  
Community Based ◽  
Rehabilitation Unit ◽  
High Incidence ◽  
Bus Driver ◽  
One Year ◽  
Intensive Rehabilitation

SummaryThe programme in an intensive rehabilitation unit in a large psychiatric hospital is described. Features include the use of non-medical staff as primary therapists, the use of a mini-bus to facilitate regular visits by patients to their home areas, the inclusion of the mini-bus driver on weekly staff conferences, the use of sociodrama, the re-organization of hospital money payments to patients, the promotion of relations with community-based facilities through occasional ‘teach-in’ days, and a special liaison social worker providing intensive follow-up after discharge. Rehabilitation was prolonged (average stay about one year) and about half of those selected for rehabilitation from the long-stay wards were discharged. Follow-up showed that these patients benefited from discharge, in spite of a relatively high incidence of psychopathology and of social problems. Those transferred back to long-stay wards showed increased institutionalization.

scholarly journals The effect of four commercial broiler hybrids and the season on occurrence of broiler condemnations in the abattoirs

2020 ◽  
Vol 50 (10) ◽  
Author(s):  
Antonise Mariely Jaguezeski ◽  
Ana Martiele Engelmann ◽  
Ivna Nalério dos Reis Machado ◽  
Beatriz Pavei Bez Batti
Keyword(s):  
Financial Impact ◽  
Welfare Programs ◽  
Conviction Rate ◽  
Commercial Broiler ◽  
Different Seasons ◽  
Time Of Year ◽  
One Year ◽  
The One ◽  
Inspection Service ◽  
Abattoir Data

ABSTRACT: Condemnations in the broilers abattoirs can represent an overview farms health and effectiveness of welfare programs, as well as predisposition between hybrids. The aim of this study was to investigate the prevalence of condemnation among four commercial broiler hybrids and the oscillation of condemnations in different seasons in a poultry abattoir. Data from condemnations of the Federal Inspection Service of a slaughterhouse were analyzed during one year, in which a total of 12.81% of partial condemnations were observed and total condemnations represented 0.41% of slaughtered broiler. There was a difference in total and partial condemnation among the hybrids evaluated, with Hubbard hybrid being the one with the highest number of condemnations (0.67% - 17.71%), followed by Ross 95 (0.42% - 14.21%), Cobb (0.30% - 10.03%); and Cobb Fast (0.26% - 9.29%). The analysis between the seasons showed a higher conviction rate in winter and a lower rate in autumn for both total and partial condemnation. Hubbard had the highest rates and Cobb Fast the lowest for most causes of condemnation. We concluded that the metabolic cause led to higher losses by total condemnation, while contamination or technopathies represented the highest rates in partial losses. The broiler hybrid and the time of year may influence the causes of condemnation in the abattoir. This information should be considered by the abattoir and the farms in sanitary planning, considering the financial impact due to losses by condemnations of carcasses.

scholarly journals Wind speed modeling based on measurement data to predict future wind speed with modified Rayleigh model

2021 ◽  
Vol 12 (3) ◽  
pp. 1823
Author(s):  
Suwarno Suwarno ◽  
Rohana Rohana
Keyword(s):  
Wind Speed ◽  
Measurement Data ◽  
Rayleigh Distribution ◽  
Scale Factor ◽  
Percentage Error ◽  
Monthly Data ◽  
Wind Speeds ◽  
Wind Characteristics ◽  
One Year ◽  
The Many

The development of modeling wind speed plays a very important in helping to obtain the actual wind speed data for the benefit of the power plant planning in the future. The wind speed in this paper is obtained from a PCE-FWS 20 type measuring instrument with a duration of 30 minutes which is accumulated into monthly data for one year (2019). Despite the many wind speed modeling that has been done by researchers. Modeling wind speeds proposed in this study were obtained from the modified Rayleigh distribution. In this study, the Rayleigh scale factor (<em>C<sub>r</sub></em>) and modified Rayleigh scale factor (<em>C<sub>m</sub></em>) were calculated. The observed wind speed is compared with the predicted wind characteristics. The data fit test used correlation coefficient (R<sup>2</sup>), root means square error (RMSE), and mean absolute percentage error (MAPE). The results of the proposed modified Rayleigh model provide very good results for users.

Effects of Sweet and Sour Yogurt Supplementation in Drinking Water on Antibiotics Free Commercial Broiler Production

2021 ◽  
Vol 20 (5) ◽  
pp. 215-223
Author(s):  
A-Al Mamun ◽  
M.Z. Islam ◽  
J. Islam ◽  
M.N. Haque ◽  
J. Raihan ◽  
...  
Keyword(s):  
Drinking Water ◽  
Broiler Production ◽  
Commercial Broiler

scholarly journals Arrival-Time Detection in Wind-Speed Measurement: Wavelet Transform and Bayesian Information Criteria

Sensors ◽  
2020 ◽  
Vol 20 (1) ◽  
pp. 269 ◽  
Author(s):  
Wei Zhang ◽  
Zhipeng Li ◽  
Xuyang Gao ◽  
Yanjun Li ◽  
Yibing Shi
Keyword(s):  
Wavelet Transform ◽  
Wind Speed ◽  
Arrival Time ◽  
Time Window ◽  
Signal To Noise Ratio ◽  
Information Criteria ◽  
Echo Signal ◽  
Time Frequency ◽  
Ultrasonic Echo ◽  
Ultrasonic Anemometer

The time-difference method is a common one for measuring wind speed ultrasonically, and its core is the precise arrival-time determination of the ultrasonic echo signal. However, because of background noise and different types of ultrasonic sensors, it is difficult to measure the arrival time of the echo signal accurately in practice. In this paper, a method based on the wavelet transform (WT) and Bayesian information criteria (BIC) is proposed for determining the arrival time of the echo signal. First, the time-frequency distribution of the echo signal is obtained by using the determined WT and rough arrival time. After setting up a time window around the rough arrival time point, the BIC function is calculated in the time window, and the arrival time is determined by using the BIC function. The proposed method is tested in a wind tunnel with an ultrasonic anemometer. The experimental results show that, even in the low-signal-to-noise-ratio area, the deviation between mostly measured values and preset standard values is mostly within 5 μs, and the standard deviation of measured wind speed is within 0.2 m/s.

scholarly journals Evaluation of Biochar as a Litter Amendment for Commercial Broiler Production

2019 ◽  
Vol 28 (4) ◽  
pp. 1089-1098
Author(s):  
John E. Linhoss ◽  
Joseph L. Purswell ◽  
Jason T. Street ◽  
Matthew R. Rowland
Keyword(s):  
Broiler Production ◽  
Commercial Broiler
Sign in / Sign up

Export Citation Format

Share Document