scholarly journals Influence of foliar-applied glycinebetaine on growth, yield and some key physiological and biochemical attributes of grape (Vitis vinifera L.)

2021 ◽  
Vol 42 (6) ◽  
pp. 3201-3218
Author(s):  
Hasnain Waheed ◽  
Hafiz Muhammad Tayyab Khan ◽  
Muhammad Mansoor Javaid ◽  
Rashad Mukhtar Balal ◽  
Muhammad Adnan Shahid ◽  
...  
Keyword(s):  
Vitis Vinifera ◽  
Foliar Application ◽  
Foliar Spray ◽  
Growth Yield ◽  
Grape Juice ◽  
Soluble Solids ◽  
Control Treatment ◽  
Vitis Vinifera L ◽  
Chlorophyll Contents ◽  
Number Of Leaves

Glycinebetaine (GB) plays an imperative role to mitigate the opposing impact of several environmental stresses in various crops. The objective of this investigation was to scrutinize the response of grape (Vitis vinifera L.) to the foliar application of GB. Diverse levels of GB (0, 10, 20 and 30 mM) were applied three times with fifteen days interval to grape cv. King’s Ruby. All levels of GB improved the physiological, biochemical and growth attributes of the grape. As compared to control treatment, foliar spray of GB applied at 30 mM increased the number of leaves/vine, leaf area and number of newly emerged branches/plant by 20.55%, 12.28% and 48.13%, respectively. The pH of grape juice was decreased by increasing GB levels. However, total soluble solids, total chlorophyll contents, grape yield and photosynthesis rate was recorded maximum with foliar spray of GB applied at 30 mM. The regression model predicted that each increment in GB level enhanced the number of leaves/plant and the number of newly emerged branches/plant by 1.8 and 0.7, respectively. Thus, it is concluded that exogenous application GB applied at 30 mM might be more useful to obtain the optimum growth and quality of grapes.

scholarly journals Effect of Foliar Application of Growth Regulators on Vegetative and Physiological Growth Parameters in Ajowan (Trachyspermum ammi L. Sprague)

2020 ◽  
pp. 100-109
Author(s):  
Y. Rajasekhara Reddy ◽  
G. Ramanandam ◽  
P. Subbaramamma ◽  
A. V. D. Dorajeerao
Keyword(s):  
Leaf Area ◽  
Foliar Application ◽  
Growth Parameters ◽  
Block Design ◽  
Foliar Spray ◽  
Dry Weight ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Trachyspermum Ammi ◽  
Number Of Leaves

A field experiment was carried out during rabi season of 2018-2019, at college farm, College of Horticulture, Dr. Y.S.R. Horticultural University, Venkataramannagudem, West Godavari District, Andhra Pradesh. The experiment was laidout in a Randomised Block Design with eleven treatments (viz., T1- NAA @ 50 ppm, T2-NAA @ 100 ppm, T3-GA3 @ 50 ppm,  T4-GA3 @ 100 ppm, T5-Thiourea @ 250 ppm, T6-Thiourea @ 500 ppm, T7-28-Homobrassinolide @ 0.1 ppm, T8-28-Homobrassinolide @ 0.2 ppm, T9-Triacontinol @ 2.5 ppm, T10-Triacontinol @ 5 ppm, T11-(Control) Water spray) and three replications. The treatments were imposed at 30 and 45 DAT in the form of foliar spray. Foliar application of GA3@ 100 ppm (T4) had recorded the maximum plant height (108.20 cm), leaf area (9.53 cm2) and leaf area index (0.74). Foliar application of thiourea @ 250 ppm (T5) had recorded the maximum values with respect to number of primary branches (15.03 plant-1), number of secondary branches (83.40 plant-1), plant spread (1793 cm2 plant-1), fresh weight (376.29 g plant-1), dry weight (103.54 g plant-1) and number of leaves plant-1((298.8). The same treatment (T5) had recorded the highest values with respect to crop growth rate (1.44 gm-2d-1), chlorophyll-a (1.40 mg g-1), chlorophyll-b (0.076 mg g-1) and total chlorophyll contents (1.48 mg g-1) in the leaves.

scholarly journals EFFECT OF FOLIAR APPLICATION OF VERMIWASH ON GROWTH AND QUALITY OF BRINJAL

2020 ◽  
Vol 3 (1) ◽  
pp. 31-34
Author(s):  
M. Yasmin ◽  
M.S. Rahman ◽  
M.A. Rahman ◽  
F.S. Shikha ◽  
M.K. Alam
Keyword(s):  
Agricultural Research ◽  
Foliar Application ◽  
Foliar Spray ◽  
Growth Yield ◽  
Nutrient Content ◽  
Growth And Yield ◽  
Control Treatment ◽  
Research Station ◽  
Water Control

The experiment was conducted at Regional Agricultural Research Station (RARS), Jamalpur, Bangladesh during the period of 2019-2020 and 2020-2021 to investigate the effect of vermiwash on growth, yield and quality of brinjal and to find out suitable foliar dose of vermiwash for optimizing the yield of brinjal. There were five treatments comprising T1= Chemical fertilizer (CF) + foliar spray of distilled water (control), T2 = CF + foliar spray of 10% vermiwash, T3 = CF + foliar spray of 20% vermiwash, T4 = CF + foliar spray of 30% vermiwash and T5= CF + foliar spray of 40% vermiwash. Results revealed that, vermiwash treated brinjal plants showed better growth and yield parameters than the control plants. The highest average brinjal fruit yield (29.99 t ha-1) was found in T3 treatment i.e., foliar spray of 20% concentration of vermiwash and the lowest (26.35 t ha-1) came from control. On the other hand, nutritional quality (moisture content, TSS, β carotene and nutrient content) were seen to be higher in vermiwash treated treatment compared to control treatment. The study suggests that, 20% concentration of vermiwash could be used as effective foliar spray for eco-friendly and higher yield of brinjal.

scholarly journals Zinc application improves growth, yield and grain zinc concentration of mung bean (Vigna radiata L.)

2021 ◽  
Vol 42 (2) ◽  
pp. 487-500
Author(s):  
Mubshar Hussain ◽  
◽  
Muhammad Zeeshan Shahid ◽  
Noman Mehboob ◽  
Waqas Ahmed Minhas ◽  
...  
Keyword(s):  
Mung Bean ◽  
Foliar Application ◽  
Growth Yield ◽  
Control Treatment ◽  
Index Number ◽  
Area Index ◽  
Chlorophyll Contents ◽  
Application Method ◽  
Biological Yield ◽  
The Impact

Minerals’ deficiency, including iodine (I), vitamin A, iron (Fe) and zinc (Zn) is a widespread threat to mankind. Around 2 billion people (children, women, and people of middle age group) across the globe suffer from mineral deficiencies. The productivity of mung bean is very low in arid and semi-arid regions due to little or no application of fertilizers. Majority of mung bean growing regions of Pakistan have low Zn concentration in soils. This study evaluated the impact of different Zn sources and their application methods on allometry, yield and grain biofortification of mung bean. Mung bean variety “Azri 2006” was used as experimental material. Three different Zn sources, i.e., zinc sulfate (ZnSO4), Zn-EDDHA and 50 % ZnSO4 + 50% Zn EDDHA. Application method included in the study was basal application, foliar application and 50% basal + 50% foliar application. The results indicated that Zn application improved allometric traits and productivity of mungbean. The ZnSO4 source of Zn with basal application resulted in the highest chlorophyll contents, leaf area index, number of sympodial and monopodial branches, and number of pods per plant, 1000-seeds weight, biological yield and seed yield as compared to control treatment. In conclusion, 10 kg ha-1 Zn application as basal application method seemed a viable option to improve mung bean productivity along with higher grain Zn biofortification.

scholarly journals Effects of foliar spray of agricultural grade mineral oil in springtime, in combination with potassium and calcium sulfates on the phenological and biophysical indices of clusters, and foliar nutritional levels in grapevine (Vitis vinifera L.) cv. Sultana (Id. Thompson seedless, Sultanina)

2021 ◽  
Vol 54 (1) ◽  
Author(s):  
Rouhollah Karimi ◽  
Abbas Saberi ◽  
Ali Khadivi
Keyword(s):  
Vitis Vinifera ◽  
Foliar Spray ◽  
Mineral Oil ◽  
Potassium Sulfate ◽  
Soluble Solids ◽  
Phosphorus Concentration ◽  
Vitis Vinifera L ◽  
Harvest Time ◽  
Berry Quality ◽  
Biophysical Indices

Abstract Background Improving the nutritional condition of grapevine in spring to regulate bloom, fruit set, and yield is among the management goals of vineyards. Methods In the present study, the early season spray of calcium sulfate (C; 0.00 and 2.00%), potassium sulfate (K; 0.00 and 3.00%), and agricultural grade mineral oil (V; 0.00 and 1.00%) on flower and fruit phenology, nutrient concentration, and cluster biophysical indices and yield of Sultana grapevine (Vitis vinifera L.) were investigated for two consecutive years. Results Based on the results, the spray of this nutrient combined with mineral oil significantly affected all the treatments except cluster length, berry length, and phosphorus concentration. The highest concentrations of potassium, calcium, and magnesium were obtained in the vines treated with V0K1C1, and the highest concentrations of zinc and iron were obtained only in the vines treated with mineral oil. In treatments containing mineral oil, especially in combination with the second level of calcium and potassium (V1K1C1), bloom time, berries pea-sized time, and harvest time were delayed by 3, 3, and 6 days compared with control vines. While in vines treated with a combination of the second level of potassium and calcium (V0K1C1), bloom time, berries pea-sized time, and harvest time were advanced by 5, 4, and 1.50 days, respectively, compared with control vines. Regarding the biophysical indices of the cluster, it was found that the vines treated with V1K1C1 had higher cluster weight, berry weight, fruit, and raisins yield than other treatments. Also, the highest berry quality, including total soluble solids, titratable acidity, and total phenol content, were obtained in the vines treated with V0K1C1. However, the lowest berry quality was observed in the vines treated with mineral oil. Conclusions Therefore, the combination of nutrients with mineral oil can alleviate the adverse effect of mineral oil solely on some phenological indices and berry quality-related traits in vineyards.

scholarly journals EFFECT OF FOLIAR APPLICATION OF ZINK AND SALICYLIC ACID ON VEGETATIVE GROWTH AND YIELD CHARACTERISTICS OF HALAWANI GRAPE CULTIVAR (Vitis vinifera L.)

2021 ◽  
Vol 52 (4) ◽  
pp. 989-998
Author(s):  
Sh. M. M. Al-Atrushy
Keyword(s):  
Salicylic Acid ◽  
Vegetative Growth ◽  
Foliar Application ◽  
Chemical Properties ◽  
Growth Yield ◽  
Growth And Yield ◽  
Control Treatment ◽  
Vitis Vinifera L ◽  
High Concentration ◽  
Grapevine Cultivar

THis investigation aimed to study the effect of foliar application with zinc alone or in combination with salicylic acid on vegetative growth, yield, physical and chemical properties of Halawani grapevine cultivar during two successive seasons (2017 and 2018). Zinc was used at concentration of 2 and 4 g.L-1 in a chelated form and salicylic acid at concentration of (50, 100 and 150 mg. L-1) in addition to control treatment for each of them. The result obtained proved that all parameters such as leaf area, total chlorophyll, number and weight of cluster, yield, berries size and weight, as soon as TSS, total sugar, juice percentage and density, β-carotenes, Zn, N. proline content of leaves were increased significantly as compared with control, while total acidity and total phenols were decreased by all treatments as compared with control. Furthermore, combination between high concentration of zinc and salicylic acid improved all parameters in comparison with the control.

scholarly journals Double Cropping in Vitis vinifera L. Pinot Noir: Myth or Reality?

Agronomy ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 799 ◽  
Author(s):  
Stefano Poni ◽  
Matteo Gatti ◽  
Sergio Tombesi ◽  
Cecilia Squeri ◽  
Paolo Sabbatini ◽  
...  
Keyword(s):  
Vitis Vinifera ◽  
Leaf Gas Exchange ◽  
Growth Yield ◽  
Early Summer ◽  
Pinot Noir ◽  
Soluble Solids ◽  
Vitis Vinifera L ◽  
Vegetative Organs ◽  
Double Cropping ◽  
Full Flowering

A novel bud-forcing technique aimed at obtaining two crops (primary and forced) within the same season was tested on potted Pinot noir grapevines. Removing young, vegetative organs from primary shoots trimmed to six nodes in early summer allows dormant buds to break para-dormancy, leading to a delayed, second crop. Meanwhile, the primary crop is left untouched. In our study, bud-forcing was applied at three different timings (full flowering, fruit-set, groat-sized berries) and compared with an unforced control (UC). Vegetative growth, yield components, shoot and vine balance as leaf area-to-yield ratios, leaf gas exchange, and grape composition were determined. Regardless of the timing of application, forcing was effective at unlocking either apical or sub-apical dormant buds on the trimmed shoot, whereas the more basal nodes stayed dormant. The additional crop present on forced shoots was 40%–50% of primary crop, which equated to approximately 1 kg/vine for all treatments. Fruitfulness on newly formed forced shoots varied from 0.8 to 1.1 clusters/shoot. Primary clusters in vines subjected to forced treatments reached target maturity with a delay of 7–12 days compared to UC, whereas forced-crop, picked at the latest available date (October 7) showed higher total soluble solids, anthocyanins and phenolics than the primary crop while retaining higher acidity. This ripening behavior was reflected in the higher A rates measured in late season on the basal leaves of forced shoots versus those of primary shoots. Forcing did not compromise fruitfulness of the basal primary nodes, which set at about 1.2 inflorescence primordia/shoot. This is the first report supporting the feasibility of double cropping in Vitis vinifera L. in warm viticulture regions.

scholarly journals Influence of Foliar Application of Compost tea on Growth, Yield and Quality of Soybean [Glycine max (L)]

2021 ◽  
pp. 66-73
Author(s):  
N. Shrinivas ◽  
P. H. Vaidya ◽  
P. H. Gourkhede
Keyword(s):  
Foliar Application ◽  
Maximum Yield ◽  
Foliar Spray ◽  
Growth Yield ◽  
Control Treatment ◽  
Compost Tea ◽  
Yield And Quality ◽  
Pod Development ◽  
Growth Attributes

A field experiment was conducted during kharif season of the year 2016-17 with soybean variety MAUS -71 as test crop in Vertisol. With three replication and eight treatments viz,T1 - Control (RDF 100%), T2-100% RDF + Water spray, T3 - RDF + Compost tea @ 10% foliar spray, T4 - RDF + Compost tea @ 15% foliar spray, T5-RDF + Compost tea @ 20% foliar spray, T6 - RDF + Compost tea @ 25% foliar spray, T7 - RDF + Compost tea @ 50% foliar spray,T8 - RDF + Compost tea @ 75% foliar spray. The results revealed that Among the different doses of foliar application of compost tea with RDF,” application of RDF + compost tea @ 50% foliar spray significantly superior growth attributes viz. plant height, leaf area, number of leaves, dry matter and minimum growth attributes were observed in the control treatment at flowering, pod development and  harvest stage. Maximum yield of soybean (2050.0 kg ha-1) was recorded with application of  RDF + Compost tea @ 50% foliar spray. The quality of soybean grain improved due to application of T7 - RDF+ compost tea @ 50% foliar spray which recorded higher values of oil content (19.90%) protein content (31.44%) and protein yield (644.29 kg ha-1).This indicated that the application of 30:60:30 kg ha-1 N : P2O5 : K2O with foliar application of compost tea @ 50 percent (30,45,60 DAS) to soybean was found beneficial for increase in growth, yield and quality of soybean.

scholarly journals Improvement of antioxidant activities and yield of spring maize through seed priming and foliar application of plant growth regulators under heat stress conditions

2017 ◽  
Vol 38 (1) ◽  
pp. 47 ◽  
Author(s):  
Ijaz Ahmad ◽  
Shehzad Maqsood Ahmed Basra ◽  
Muhammad Akram ◽  
Allah Wasaya ◽  
Muhammad Ansar ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Foliar Application ◽  
Antioxidant Activities ◽  
Foliar Spray ◽  
Seed Priming ◽  
Chlorophyll Contents ◽  
Exogenous Application ◽  
Hybrid Maize

Heat stress during reproductive and grain filling phases adversely affects the growth of cereals through reduction in grain’s number and size. However, exogenous application of antioxidants, plant growth regulators and osmoprotectants may be helpful to minimize these heat induced yield losses in cereals. This two year study was conducted to evaluate the role of exogenous application of ascorbic acid (AsA), salicylic acid (SA) and hydrogen peroxide (H2O2) applied through seed priming or foliar spray on biochemical, physiological, morphological and yield related traits, grain yield and quality of late spring sown hybrid maize. The experiment was conducted in the spring season of 2007 and 2008. We observed that application of AsA, SA and H2O2 applied through seed priming or foliar spray improved the physiological, biochemical, morphological and yield related traits, grain yield and grain quality of late spring sown maize in both years. In both years, we observed higher superoxide dismutase (SOD), catalase (CAT) and peroxidase (POD) activity in the plants where AsA, SA and H2O2were applied through seed priming or foliar spray than control. Membrane stability index (MSI), relative water contents (RWC), chlorophyll contents, grain yield and grain oil contents were also improved by exogenous application of AsA, SA and H2O2 in both years. Seed priming of AsA, SA and H2O2was equally effective as the foliar application. In conclusion, seed priming with AsA, SA and H2O2 may be opted to lessen the heat induced yield losses in late sown spring hybrid maize. Heat tolerance induced by ASA, SA and H2O2 may be attributed to increase in antioxidant activities and MSI which maintained RWC and chlorophyll contents in maize resulting in better grain yield in heat stress conditions.

scholarly journals Impact of zinc fertilization on growth, yield and quality of zero till wheat (Triticum aestivum L.)

2021 ◽  
Vol 42 (2) ◽  
pp. 326-331
Author(s):  
M. Singh ◽  
◽  
K.S. Sandhu ◽  
Keyword(s):  
Foliar Application ◽  
Foliar Spray ◽  
Growth Yield ◽  
Triticum Aestivum L ◽  
Recommended Dose ◽  
Zn Deficiency ◽  
Soil Application ◽  
Yield And Quality ◽  
The Impact

Aim: To determine the impact of soil and foliar application of ZnSO4.7H2O at late stages of wheat as heading initiation (5% ear formation), 100% heading (complete ear formation) and heading initiation and 100% heading along with recommended dose of fertilizer on growth, yield and quality of zero till wheat. Methodology: The field experiment was conducted on zero till wheat. The treatments consisted of control (no Zn), soil application of 12.5, 25, 37.5, 50 kg ha-1 ZnSO4.7H2O and foliar application of 0.5% Zn as one spray at heading initiation (5% ear formation), one spray at 100% heading (complete ear formation) and two sprays at heading initiation and 100% heading with recommended dose of fertilizer. These treatments were evaluated in RBD with three replications. Results: Soil application of 50, 37.5 and 25 kg Zn ha-1 with two foliar sprays of 0.5% at heading initiation (5% ear formation) and 100% heading (complete ear formation) stages gave significantly higher average grain and straw yield and Zn concentration in grain than other treatments, including control. Interpretation: Enhanced application of Zn as soil and foliar application ameliorates soil Zn deficiency and increases protein content in grains, which might influence the quality and yield of zero tilled wheat. Key words: Foliar spray, Grain yield, Wheat, Zinc

Sign in / Sign up

Export Citation Format

Share Document