Application of Terahertz Spectroscopy and Imaging

2010 ◽  
Vol 5 (4) ◽  
pp. 123-129
Author(s):  
Mu Kaijun ◽  
Zhang Cunlin

We examined the feasibility of Terahertz time-domain spectroscopy (THz-TDS) using a 4-mm-thick quartz crystal to extract the angle of rotation of THz radiation polarization induced by a two-color laser in air plasma. We also used the THz-TDS technique to identify explosives and melamine in mixtures. In addition, we presented a new opto-mechanical scanner for security applications using the method of passive THz imaging

2020 ◽  
Vol 1 (1) ◽  
pp. 1-4
Author(s):  
Chiara Ciccarelli ◽  
Hannah Joyce ◽  
Jason Robinson ◽  
Farhan Nur Kholid ◽  
Dominik Hamara ◽  
...  

Time-Domain terahertz spectroscopy (THz TDS) has attracted attention from many scientific disciplines as it enables accessing the gap between electronic and optical techniques. One application is to probe spintronic dynamics in sub-picosecond time scale. Here, we discuss principles and technical aspects of a typical THz TDS setup. We also show an example of terahertz time-domain data obtained from a Co/Pt thin film calibrant, which is a well-studied spintronic structure emitting strong THz radiation. See video at https://youtu.be/X7vrvQcmy8c.


2019 ◽  
Vol 9 (3) ◽  
pp. 391 ◽  
Author(s):  
Anton Koroliov ◽  
Genyu Chen ◽  
Kenneth M. Goodfellow ◽  
A. Nick Vamivakas ◽  
Zygmunt Staniszewski ◽  
...  

The terahertz time-domain spectroscopy (THz-TDS) technique has been used to obtain transmission THz-radiation spectra of polymer nanocomposites containing a controlled amount of exfoliated graphene. Graphene nanocomposites (1 wt%) that were used in this work were based on poly(ethylene terephthalate-ethylene dilinoleate) (PET-DLA) matrix and were prepared via a kilo-scale (suitable for research and development, and prototyping) in-situ polymerization. This was followed by compression molding into 0.3-mm-thick and 0.9-mm-thick foils. Transmission electron microscopy (TEM) and Raman studies were used to confirm that the graphene nanoflakes dispersed in a polymer matrix consisted of a few-layer graphene. The THz-radiation transients were generated and detected using a low-temperature–grown GaAs photoconductive emitter and detector, both excited by 100-fs-wide, 800-nm-wavelength optical pulses, generated at a 76-MHz repetition rate by a Ti:Sapphire laser. Time-domain signals transmitted through the nitrogen, neat polymer reference, and 1-wt% graphene-polymer nanocomposite samples were recorded and subsequently converted into the spectral domain by means of a fast Fourier transformation. The spectral range of our spectrometer was up to 4 THz, and measurements were taken at room temperature in a dry nitrogen environment. We collected a family of spectra and, based on Fresnel equations, performed a numerical analysis, that allowed us to extract the THz-frequency-range refractive index and absorption coefficient and their dependences on the sample composition and graphene content. Using the Clausius-Mossotti relation, we also managed to estimate the graphene effective dielectric constant to be equal to ~7 ± 2. Finally, we extracted from our experimental data complex conductivity spectra of graphene nanocomposites and successfully fitted them to the Drude-Smith model, demonstrating that our graphene nanoflakes were isolated in their polymer matrix and exhibited highly localized electron backscattering with a femtosecond relaxation time. Our results shed new light on how the incorporation of exfoliated graphene nanoflakes modifies polymer electrical properties in the THz-frequency range. Importantly, they demonstrate that the complex conductivity analysis is a very efficient, macroscopic and non-destructive (contrary to TEM) tool for the characterization of the dispersion of a graphene nanofiller within a copolyester matrix.


2018 ◽  
Vol 10 (42) ◽  
pp. 5097-5104 ◽  
Author(s):  
Binghua Cao ◽  
Hui Li ◽  
Mengbao Fan ◽  
Wei Wang ◽  
Mengyun Wang

Terahertz time-domain spectroscopy combined with chemometrics is utilized to identify imidacloprid and carbendazim in a flour substrate.


Sensors ◽  
2020 ◽  
Vol 20 (12) ◽  
pp. 3352
Author(s):  
Sandrine van Frank ◽  
Elisabeth Leiss-Holzinger ◽  
Michael Pfleger ◽  
Christian Rankl

Terahertz time-domain spectroscopy is a useful technique to characterize layered samples and thin films. It gives access to their optical properties and thickness. Such measurements are done in transmission, which requires access to the sample from opposite sides. In reality this is not always possible. In such cases, reflection measurements are the only option, but they are more difficult to implement. Here we propose a method to characterize films in reflection geometry using a polarimetric approach based on the identification of Brewster angle and modeling of the measured signal to extract the refractive index and thickness of the sample. The technique is demonstrated experimentally on an unsupported single layer thin film sample. The extracted optical properties and thickness were in good agreement with established transmission terahertz spectroscopy measurements. The new method has the potential to cover a wide range of applications, both for research and industrial purposes.


2019 ◽  
Vol 9 (13) ◽  
pp. 2704 ◽  
Author(s):  
Kai-Henning Tybussek ◽  
Kevin Kolpatzeck ◽  
Fahd Faridi ◽  
Sascha Preu ◽  
Jan C. Balzer

THz time-domain spectroscopy (TDS) is a promising tool for quality control purposes in industrial applications, but the high cost and the relatively large laser sources still make it difficult to use the full potential of the technology for a decent price. In this work, a THz TDS system, which uses a commercially available Fabry–Perot laser diode emitting at 1550 nm, is presented. By dispersion compensation, pulses with a duration of 544 fs were generated, resulting in THz radiation with a bandwidth of 1.4 THz and a peak dynamic range of 56 dB with state-of-the-art ErAs:In(Al)GaAs photoconducting antennas. These results are compared with those of a conventional and expensive fiber laser system with a 90 fs pulse duration.


Sensors ◽  
2020 ◽  
Vol 20 (9) ◽  
pp. 2616 ◽  
Author(s):  
Robert B. Kohlhaas ◽  
Lars Liebermeister ◽  
Steffen Breuer ◽  
Marcel Amberg ◽  
David de Felipe ◽  
...  

We present a fiber coupled transceiver head for terahertz (THz) time-domain reflection measurements. The monolithically integrated transceiver chip is based on iron (Fe) doped In0.53Ga0.47As (InGaAs:Fe) grown by molecular beam epitaxy. Due to its ultrashort electron lifetime and high mobility, InGaAs:Fe is very well suited as both THz emitter and receiver. A record THz bandwidth of 6.5 THz and a peak dynamic range of up to 75 dB are achieved. In addition, we present THz imaging in reflection geometry with a spatial resolution as good as 130 µm. Hence, this THz transceiver is a promising device for industrial THz sensing applications.


RSC Advances ◽  
2017 ◽  
Vol 7 (66) ◽  
pp. 41667-41674 ◽  
Author(s):  
Shihan Yan ◽  
Hua Zhang ◽  
Zhongbo Yang ◽  
Mingjie Tang ◽  
Mingkun Zhang ◽  
...  

Three methylene blue crystalline hydrates were identified by terahertz spectroscopy according to their different THz absorption features.


Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3510
Author(s):  
Liang Qi ◽  
Linas Minkevičius ◽  
Andrzej Urbanowicz ◽  
Andrej Švigelj ◽  
Ignas Grigelionis ◽  
...  

An ability of lensless titanium-based antenna coupled microbolometers (Ti-μbolometers) operating at room temperature to monitor precisely radiation patterns in terahertz time-domain spectroscopy (THz-TDS) systems are demonstrated. To provide comprehensive picture, two different THz-TDS systems and Ti-μbolometers coupled with three different antennas—narrowband dipole antennas for 0.3 THz, 0.7 THz and a log-periodic antenna for wideband detection—were selected for experiments. Radiation patterns, spatial beam profiles and explicit beam evolution along the propagation axis are investigated; polarization-sensitive properties under various THz emitter power ranges are revealed. It was found that the studied Ti-μbolometers are convenient lensless sensors suitable to discriminate and control THz radiation pattern features in various wideband THz-TDS systems.


2021 ◽  
Author(s):  
Han Wang ◽  
Hiroki Kataoka ◽  
Satoru Tsuchikawa ◽  
Tetsuya Inagaki

Abstract Terahertz time-domain spectroscopy (THz-TDS) has expanded possibilities in cellulose crystallography research, as THz radiation detects most intermolecular vibrations and responds to the phonons of crystalline lattices. In this study, we traced the transformation of the cellulose crystalline lattice from cellulose I to cellulose II by THz-TDS and X-ray powder diffraction. Cellulose II was obtained by treating cellulose I with NaOH of different concentrations (0 wt%–20 wt%, at 2 wt% intervals). The THz absorption coefficient spectra of cellulose II showed three characteristic peaks (at 1.32 THz, 1.76 THz, and 2.77 THz). The THz absorption coefficient spectra of cellulose II treated with 20-wt% NaOH and cellulose I without NaOH treatment were fitted by a seventh-order Fourier series. Thus, the THz absorption coefficient spectra of samples treated with NaOH of other concentrations could be considered a combination of these two fitted profiles of cellulose I and cellulose II, multiplied by different coefficients. Furthermore, the coefficients could reflect the relative contents of cellulose I and cellulose II in the samples.


2016 ◽  
Vol 71 (3) ◽  
pp. 456-462 ◽  
Author(s):  
Muhammad Mumtaz ◽  
Ahsan Mahmood ◽  
Sabih D. Khan ◽  
M. Aslam Zia ◽  
Mushtaq Ahmed ◽  
...  

Polymers are among the most commonly used materials in our everyday life. They are generally transparent to terahertz (THz) radiation, but are quite difficult to differentiate using optical techniques as few or no characteristic features exist in the spectral range of <2.0 THz for small and portable radiation systems. In this work, we report experimental measurement of refractive indices and absorption coefficients of styrene acrylonitrile (SAN) and Bakelite in the spectral range of 0.2–2.0 THz for the first time. Additionally, we demonstrate that by combining principle component analysis (PCA) with THz time-domain spectroscopy one can differentiate such polymers. In this analysis, the first three principle components PC1, PC2, and PC3 depict >94% variance with a distribution of 72.45%, 11.52%, and 9.38%, respectively.


Sign in / Sign up

Export Citation Format

Share Document