scholarly journals General observations of building behaviour during the 8th October 2005 Pakistan earthquake

2008 ◽  
Vol 41 (4) ◽  
pp. 209-233 ◽  
Author(s):  
Jitendra K. Bothara ◽  
Kubilây M O Hiçyılmaz
Keyword(s):  
Reinforced Concrete ◽  
Building Structures ◽  
Reinforced Concrete Frame ◽  
Kashmir Earthquake ◽  
Concrete Frame ◽  
The North ◽  
2005 Kashmir Earthquake ◽  
Property Loss ◽  
Building Behaviour ◽  
Stone Walls

The paper presents the authors’ observations on the performance of buildings during the 8th October 2005, Kashmir earthquake in parts of Pakistan-administered Kashmir, and the North Western Frontier Province of Pakistan. A majority of the buildings in the earthquake region were non-engineered, owner-built, loadbearing masonry or reinforced concrete framed structures. Most of the masonry buildings were built with random or semi-dressed stone-walls without any reinforcement. The reinforced concrete frame buildings were deficient in strength, lacked ductile detailing and were poorly constructed. A large number of such buildings collapsed, leading to widespread destruction and loss of life. The building damage was the main cause behind the human and property loss. The collapse of floor and roof structures, the brittle behaviour of concrete buildings, a lack of integrity in masonry structures, and a lack of incorporation of seismically resistant features in building structures are found to be main reasons for the catastrophe.

scholarly journals Assessment of Seismic Vulnerability of Reinforced Concrete Frame buildings

2018 ◽  
Vol 149 ◽  
pp. 02036
Author(s):  
Cherifi Fatiha ◽  
Farsi Mohammed ◽  
Kaci Salah
Keyword(s):  
Reinforced Concrete ◽  
Seismic Vulnerability ◽  
Reinforced Concrete Frame ◽  
Nonlinear Method ◽  
Seismic Risk Analysis ◽  
Building Inventory ◽  
Concrete Frame ◽  
Capacity Curves ◽  
The North ◽  
Frame Buildings

The seismic activity remains strong in the north of Algeria since no less than 30 earthquakes per month are recorded. The large number of structures built before the introduction of the seismic standards represents a high seismic risk. Analysis of damage suffered during the last earthquakes highlighted the vulnerability of the existing structures. In this study the seismic behavior of the existing buildings in Tizi-Ouzou city, located in the north of Algeria, is investigated. To make this assessment, a database was created following a building inventory based on a set of technical folders and field visits. The listed buildings have been classified into different typologies. Only reinforced concrete frame buildings are considered in this paper. The approach adopted to estimate structures damage is based on four main steps: 1) construction of capacity curves using static nonlinear method “push-over”, 2) estimate of seismic hazard, 3) determination of performance points, and finally 4) deduction of damage levels.

Experimental and Numerical Studies on the Reinforced Concrete Frames Subjected to Blast Loads

2012 ◽  
Vol 157-158 ◽  
pp. 1173-1177
Author(s):  
Li Xiao ◽  
Wen Zhong Qu ◽  
Jian Gang Wang
Keyword(s):  
Reinforced Concrete ◽  
Numerical Models ◽  
Computer Code ◽  
Economic Loss ◽  
Frame Structure ◽  
Building Structures ◽  
Concrete Frames ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Blast Response

Terrorist bombing attacks will endanger and may even destroy the target building structures, resulting in economic loss and casualties. Typical columns and floor slab systems are not designed to resist the complex blast loading. So, in recent years, the effects of blast on conventional public buildings are focused on. In this paper,a two-bay,one-story reinforced concrete frame structure which is used to model a portion of a typical reinforced concrete frame structural system is used to investigate the blast response. The experiments are conducted on two models, allowing a variation in explosives standoff and explosives charge. In each experiment,the blast pressure values are recorded and the degree of damage of the frames are studied. According to the two kinds of experiments, two numerical models are established. ALE method which considers the interaction of the explosive, the air, and the structure is applied.Structure response analyses are performed using the large deformation finite-element computer code, LS-DYNA. The numerical results are compared with the experiment results, and a good agreement is obtained. The calculating results also demonstrate that some experimental value is unreasonable.

scholarly journals Recent development in seismic design of reinforced concrete buildings in Japan

1991 ◽  
Vol 24 (4) ◽  
pp. 333-340
Author(s):  
H. Aoyama
Keyword(s):  
Reinforced Concrete ◽  
High Strength ◽  
Response Analysis ◽  
Building Structures ◽  
Reinforced Concrete Frame ◽  
Concrete Frame ◽  
Construction Methods ◽  
Building Research Institute ◽  
Earthquake Resistant Design ◽  
Earthquake Resistant

Japan experienced a quick development of highrise reinforced concrete frame-type apartment building construction, about 30 stories high, in the last decade. Outline of this development is first introduced in terms of planning of buildings, materials, construction methods, earthquake resistant design and dynamic response analysis. This quick development was made possible by, among others, the available high strength concrete and steel. In an attempt to further promote development of new and advanced reinforced concrete building structures, a five-year national project was started in 1988 in Japan, promoted by the Building Research Institute, Ministry of Construction. Outline of this project is introduced in the second part of this paper. It aims at the development and use of concrete up to 120 MPa, and steel up to 1200 MPa.

scholarly journals Buildings of the John Paul II Center – a challenge for civil engineering and architecture

2020 ◽  
Vol 19 (4) ◽  
pp. 109-124
Author(s):  
Bogumił Wrana ◽  
Jan Wrana
Keyword(s):  
Reinforced Concrete ◽  
Civil Engineering ◽  
White Pulp ◽  
Reinforced Concrete Frame ◽  
Early Christian ◽  
Concrete Frame ◽  
John Paul Ii ◽  
Christian Churches ◽  
The North ◽  
Urban Complex

The buildings of the John Paul II Centre (CJPII) are located in Cracow-Łagiewniki on a heap of limestone sediments from the former "Solvay" Sodium Plant in Cracow. The area is called "White Seas" (Białe Morze) and is located in the natural depression of the Wilga river valley, between Św. Józefa hill in the north and Borkowska Hill (Góra Borkowska) in the south-west. The limestone sediments as a building substrate for CJPII buildings is unprecedented ground in the world and thus a challenge for civil engineering. The height of the heap reaches about 15 m and has retained the consistency of a white pulp until today. CJPII buildings are objects of the third geotechnical category, founded on a foundation slab of 0.8-m thickness, and in the central part of 0.45-m thickness. The slab is based on 200 reinforced concrete CFA-type drilled piles with a diameter of 1000 mm and 650 mm and length up to 26 m. The load-bearing structure of the CJPII buildings is a reinforced concrete frame and shell structure. The symbolism of the urban complex (e.g. the scale of the market square in Wadowice), located on a system of 200 piles above the post-industrial landfill/heaps of sediments, is ensured with architectural solutions referring to places connected with the life of John Paul II – during the occupation in 1940-1944 he was a student of Jagiellonian University in Cracow and the worker of the Solvay factory in the Podgórze district, in 1958 he became a bishop of Cracow, in 1967 – the cardinal (architectural details from the St. Mary Church and the Wawel Cathedral), 1978-2005 – the pilgrim-pope from Rome, who confirmed the mission of the Church continuing the tradition depicted in the early-christian churches on the wall mosaics (the Basilica of San Vitale and the Basilica of Sant’ Apollinare Nuovo in Ravenna).

scholarly journals Shear Behavior of a Reinforced Concrete Frame Retrofitted with a Hinged Steel Damping System

2020 ◽  
Vol 12 (24) ◽  
pp. 10360
Author(s):  
Hyun-Do Yun ◽  
Sun-Woong Kim ◽  
Wan-Shin Park ◽  
Sun-Woo Kim
Keyword(s):  
Reinforced Concrete ◽  
Shear Behavior ◽  
Seismic Retrofitting ◽  
Reinforced Concrete Frame ◽  
Main Research ◽  
Torsion Spring ◽  
Concrete Frame ◽  
Energy Dissipation Capacity ◽  
Research Questions ◽  
Torsion Springs

The purpose of this study was to experimentally evaluate the effect of a hinged steel damping system on the shear behavior of a nonductile reinforced concrete frame with an opening. For the experimental test, a total of three full-scale reinforced concrete frame specimens were planned, based on the “no retrofitting” (NR) specimens with non-seismic details. The main research questions were whether the hinged steel damping system is reinforced and whether torsion springs are installed in the hinged steel damping system. From the results of the experiment, the hinged steel damping system (DR specimen) was found to be effective in seismic retrofitting, while isolating the opening of the reinforced concrete (RC) frame, and the torsion spring installed at the hinged connection (DSR specimen) was evaluated to be effective in controlling the amount of deformation of the upper and lower dampers. The strength, stiffness, and energy dissipation capacity of the DSR specimen were slightly improved compared to the DR specimen, and it was confirmed that stress redistribution was induced by the rotational stiffness of the torsion spring installed in the hinge connection between the upper and lower frames.

Deformation Characteristics of Reinforced Concrete Beam-Column Joint Cores under Earthquake Loading

2003 ◽  
Vol 6 (1) ◽  
pp. 15-21 ◽  
Author(s):  
Sayed A. Attaalla ◽  
Mehran Agbabian
Keyword(s):  
Reinforced Concrete ◽  
Shear Deformation ◽  
Concrete Beam ◽  
Reinforced Concrete Beam ◽  
Reinforced Concrete Frame ◽  
Bond Failure ◽  
Strain Compatibility ◽  
Concrete Frame ◽  
Column Joint ◽  
Reinforced Concrete Frame Structures

The characteristics of the shear deformation inside the beam-column joint core of reinforced concrete frame structures subjected to seismic loading are discussed in this paper. The paper presents the formulation of an analytical model based on experimental observations. The model is intended to predict the expansions of beam-column joint core in the horizontal and vertical directions. The model describes the strain compatibility inside the joint in an average sense. Its predictions are verified utilizing experimental measurements obtained from tests conducted on beam-column connections. The model is found to adequately predict the components of shear deformation in the joint core and satisfactorily estimates the average strains in the joint hoops up to bond failure. The model may be considered as a simple, yet, important step towards analytical understanding of the sophisticated shear mechanism inside the joint and may be implemented in a controlled-deformation design technique of the joint.

Resistance of Reinforced Concrete Frames with Masonry Infill Walls to In-Plane Vertical Loading

2016 ◽  
Vol 711 ◽  
pp. 982-988
Author(s):  
Alex Brodsky ◽  
David Z. Yankelevsky
Keyword(s):  
Reinforced Concrete ◽  
Failure Modes ◽  
Progressive Collapse ◽  
Lateral Loading ◽  
Masonry Walls ◽  
Reinforced Concrete Frame ◽  
Masonry Infill ◽  
Concrete Frame ◽  
Vertical Loading ◽  
Infill Masonry

Numerous studies have been conducted on the in plane behavior of masonry infill walls to lateral loading simulating earthquake action on buildings. The present study is focused on a problem that has almost not been studied regarding the vertical (opposed to lateral) in-plane action on these walls. This may be of concern when a supporting column of a multi-storey reinforced concrete frame with infill masonry walls undergoes a severe damage due to an extreme loading such as a strong earthquake, car impact or military or terror action in proximity to the column. The loss of the supporting column may cause a fully or partly progressive collapse to a bare reinforced concrete frame, without infill masonry walls. The presence of the infill masonry walls may restrain the process and prevent the development of a progressive collapse. The aim of the present study is to test the in-plane composite action of Reinforced Concrete (RC) frames with infill masonry walls under vertical loading through laboratory experiments and evaluate the contributions of infill masonry walls, in an attempt to examine the infill masonry wall added resistance to the bare frame under these circumstances. Preliminary results of laboratory tests that have been conducted on reinforced concrete infilled frames without a support at their end, under monotonic vertical loading along that column axis will be presented. The observed damages and failure modes under vertical loading are clearly different from the already known failure modes observed in the case of lateral loading.

Sign in / Sign up

Export Citation Format

Share Document