scholarly journals Structure and Morphology Properties of Nanoparticle Hematite Pigment from Lathe Waste

2021 ◽  
Vol 13 (1) ◽  
pp. 21
Author(s):  
Lilik Miftahul Khoiroh ◽  
Asmaul Dwi Ayu Sholekah ◽  
Eny Yulianti
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Diffraction Data ◽  
X Ray Diffraction ◽  
Crystallinity Degree ◽  
X Ray ◽  
Structure And Morphology ◽  
Calcination Method ◽  
Scanning Electron ◽  
Color Reader

Hematite coated PEG was synthesized by the sonication-calcination method. A variation of Na2CO3 is investigated to know the effect on structure and morphology. Characterization of samples are using X-ray fluorescence, X-ray diffraction, Scanning electron microscopy, and color reader techniques. XRF data showed that iron is the highest element in the precursor. The X-ray diffraction data confirm that Fe(OH)3, α-FeOOH, and Fe3O4 established at the sonication stage are then transformed into the α-Fe2O3 phase after calcination. The X-ray diffraction data also was found that α-Fe2O3 at 0.5 M formed with the highest crystallinity degree. The scanning electron microscopy showed that the particle's shape is spherical, bar-shaped, and aggregate. However, the distribution of particles is not uniform and still displays agglomeration. The Color reader shows the highest degree of lightness obtained is at 1 M variation.

Characteristic of a Novel Composite Inorganic Polymer Coagulant-PAZF Prepared from Industrial Wastes

2014 ◽  
Vol 977 ◽  
pp. 82-85
Author(s):  
Ming Li ◽  
Yan Zhen Yu ◽  
Juan Ting Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Complex Compounds ◽  
Industrial Wastes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Coagulation Performance ◽  
Composite Coagulant ◽  
Scanning Electron

A new composite coagulant polymeric aluminum zinc ferric (PAZF) was synthesized from industrial wastes. The structure and morphology of the coagulant was characterized by X-ray Diffraction (XRD), Infrared Spectroscopy (IR) and Scanning Electron Microscopy (SEM) and the coagulation performances were evaluated by dyeing-printing wastewater treatment. The results show that new complex compounds are formed in PAZF. Compared with poly aluminum chloride (PAC), the contents of ionic polymerized bonds and the cross-copolymerization among Fe (III), Al (III) and Zn (II) hydroxyl polymerized bonds are increase obviously, and the surface morphology of PAZF presents a net-like structure with the longer molecular chain. Coagulation experiments indicate that PAZF exhibits better coagulation performance in removing turbidity, COD and chromaticity.

X-ray powder diffraction data for two new compounds (NH4)1.5Ni2V2O7(OH)1.5 · H2O and (NH4)1.5Cu1.125Ni1.125V2O7(OH)2 · H2O

2011 ◽  
Vol 26 (S1) ◽  
pp. S51-S54
Author(s):  
Johana Arboleda ◽  
Adriana Echavarría
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Thermogravimetric Analysis ◽  
Powder Diffraction ◽  
Diffraction Data ◽  
Powder Diffraction Data ◽  
X Ray Diffraction ◽  
X Ray ◽  
New Compounds ◽  
Scanning Electron

Two new bimetallic and trimetallic compounds (NH4)1.5Ni2V2O7(OH)1.5 · H2O and (NH4)1.5Cu1.125 Ni1.125V2O7(OH)2 · H2O were synthesized by hydrothermal method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), and X-Ray fluorescence (XRF). Crystallographic studies showed that both compounds are hexagonal with space group P-62c.

Archaeometric analysis of a fragment of molded stucco cornice with rope from the House of the Mithraeum (Mérida, Spain)

2021 ◽  
pp. 1-22
Author(s):  
Alicia Fernández Díaz ◽  
Ana María Bejarano Osorio ◽  
Macarena Bustamante-Álvarez ◽  
Dolores Julia Yusá Marco ◽  
Sofía Vicente Palomino ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Diffraction Data ◽  
Raw Materials ◽  
Compositional Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Technical Study ◽  
Scanning Electron

Abstract During the excavations carried out since 2017 in the House of the Mithraeum (Casa del Mitreo) in Mérida a collection of paintings was recovered from Room 11, which had been abandoned in the late 3rd c. CE after a fire. The remains included fragments of molded stucco cornices, with braided esparto grass ropes on the reverse that were used to attach them to the ceiling. This article presents the descriptive and technical study of the finds and their compositional analysis using scanning electron microscopy and X-ray diffraction. Data resulting from these analyses allow us to understand the fragments’ composition and technical execution, and even the possible circulation of workshops and raw materials.

Effect of Microwave Power in Obtaining Ferrite Nanopowders Synthesized by Combustion

2014 ◽  
Vol 775-776 ◽  
pp. 450-454
Author(s):  
Mirele Costa da Silva ◽  
A.T.C. Silva ◽  
Ana Cristina F. Melo Costa ◽  
Normanda Lino de Freitas
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Crystallite Size ◽  
Microwave Power ◽  
Morphological Characteristics ◽  
Ferrite Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Scanning Electron

The search of variations in the methodology for obtaining nanoferrites has attracted the interest of researchers in search of better results with regard to the structure and morphology of these materials. This study evaluates the effect of microwave power (50 and 70 W) in the structural and morphological characteristics of NiZn ferrite, using aniline as a fuel for combustion reaction. The aluminas were characterized by X-ray diffraction and scanning electron microscopy. The results showed that only the variation in microwave power is sufficient to change the structure of nanoferrites. The sample synthesized in power of 50 W was presented monophasic, illustrating the ferrite phase with crystallite size of 50.04 nm; and for 70 W, it was appeared, besides the ferrite phase, hematite and zinc oxide with a crystallite size of 17.07 nm. The morphology did not change significantly, the nanoferrites showed particles with similar geometry.

Effect of EDTA on the Morphology and Size of SrCO3 Particles during Crystallization

2010 ◽  
Vol 148-149 ◽  
pp. 1551-1555
Author(s):  
Yan Hong Zhao ◽  
Qing Yue Jia ◽  
You Gao ◽  
Xiao Jing Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Acetic Acid ◽  
Spherical Shape ◽  
Strontium Carbonate ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Scanning Electron

Strontium carbonate particles with different morphologies and sizes were synthesized successfully by a precipitation method in the presence of ethylenediaminetetra-acetic acid disodium (abbreviate as EDTA) at 25 . The phase structure and morphology of these SrCO3 particles were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The XRD results showed that orthorhombic crystalline SrCO3 particles were prepared in the absence of and presence of EDTA. It was found that this additive played an important role in controlling the morphology and size of the particles, which changed from dendritic to spherical shape as EDTA was added.

Synthesis and crystal structure of 2-amino-3-hydroxypyridinium dioxido(pyridine-2,6-dicarboxylato-κ3O2,N,O6)vanadate(V) and its conversion to nanostructured V2O5

2015 ◽  
Vol 71 (2) ◽  
pp. 89-92
Author(s):  
Ali Hejrani-Dalir ◽  
Masumeh Tabatabaee ◽  
Ali Sheibani
Keyword(s):  
Crystal Structure ◽  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Dipicolinic Acid ◽  
X Ray Diffraction ◽  
Synthesis And Crystal Structure ◽  
X Ray ◽  
Structure And Morphology ◽  
Counter Cation ◽  
Scanning Electron

2-Amino-3-hydroxypyridinium dioxido(pyridine-2,6-dicarboxylato-κ3O2,N,O6)vanadate(V), (C5H7N2O)[V(C7H3NO4)O2] or [H(amino-3-OH-py)][VO2(dipic)], (I), was prepared by the reaction of VCl3with dipicolinic acid (dipicH2) and 2-amino-3-hydroxypyridine (amino-3-OH-py) in water. The compound was characterized by elemental analysis, IR spectroscopy and X-ray structure analysis, and consists of an anionic [VO2(dipic)]−complex and an H(amino-3-OH-py)+counter-cation. The VVion is five-coordinated by oneO,N,O′-tridentate dipic dianionic ligand and by two oxide ligands. Thermal decomposition of (I) in the presence of polyethylene glycol led to the formation of nanoparticles of V2O5. Powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the synthesized powder.

Study on the Structure and Morphology of CexZr(1-x)O2 Mixed Oxides

2014 ◽  
Vol 938 ◽  
pp. 46-51 ◽  
Author(s):  
M. Nazri Abu Shah ◽  
S. Hanim Md Nor ◽  
Kamariah Noor Ismail ◽  
Abdul Hadi
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Mixed Oxides ◽  
Average Crystallite Size ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Structure And Morphology ◽  
Scanning Electron ◽  
Nm Range

A series of CexZr(1-x)O2 mixed oxides with different ratio (0 x 1) have been synthesized using microemulsion method. The structure and morphology of the mixed oxides have been investigated via X-ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM). The results showed that the synthesized mixed oxides were of nanoscale size and the cubic phase was obtained with the application of a ratio of x > 0.5. Additionally, it was found that the tetragonal phase existed with lower ceria content. The average crystallite size of the CexZr(1-x)O2 series were found to be in the 5 - 10 nm range. Moreover, the roughness of these mixed oxides had also decreased with increasing ceria content.

Preparation and Growth Mechanism of Hexagonal MgAl2O4 Spinel Fibers

2008 ◽  
Vol 368-372 ◽  
pp. 409-411 ◽  
Author(s):  
Dao Yuan Yang ◽  
Fen Ling Qian ◽  
Kai Zhu ◽  
Zhan Ling Lu ◽  
Rui Zhang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Growth Mechanism ◽  
Nitrogen Atmosphere ◽  
X Ray Diffraction ◽  
Vapor Liquid Solid ◽  
X Ray ◽  
Structure And Morphology ◽  
Vapor Liquid Solid Mechanism ◽  
Scanning Electron

Hexagonal MgAl2O4 spinel fibers were synthesized at 1500oC for 6h in nitrogen atmosphere. The structure and morphology of the fibers were investigated using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The fibers grew via vapor- liquid- solid mechanism. The twin mechanism was suggested to play a key role in the formation process of the hexagonal fibers.

Phase Analysis of Al-Mn Compounds in the AZ Magnesium Alloys

2007 ◽  
Vol 546-549 ◽  
pp. 395-398 ◽  
Author(s):  
Chuan Pu Liu ◽  
Fu Sheng Pan ◽  
Wei Qing Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Magnesium Alloys ◽  
Leaf Shape ◽  
Extrusion Process ◽  
X Ray Diffraction ◽  
Extraction Technology ◽  
X Ray ◽  
Structure And Morphology ◽  
Scanning Electron

The powders of Al-Mn phases were obtained from the as-cast, as-rolled and as-extruded AZ magnesium alloys (AZ31, AZ61) by using the extraction technology, which was found to be one of the effective methods for analyzing Al-Mn phases in the AZ magnesium alloys. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersion X-ray detector (EDX) were used to investigate the structure and morphology of these compound powders. The results showed that manganese existed in both the way of Al8Mn5 phases and dissociated manganese particles in the AZ magnesium alloys, and rolling or extrusion process did not change the type of the Al8Mn5 phases. SEM observation showed that Al8Mn5 phases were formed mainly in dendrite and leaf shape with the size of 15-100μm in the as-cast AZ magnesium alloys, and were broken into fine spherical fragments with the size of about 4-5μm after rolling or extrusion.

Influence of Sintering Temperature on Mechanical Properties of Biologically Derived Hydroxyapatite Bodies

2006 ◽  
Vol 309-311 ◽  
pp. 45-48 ◽  
Author(s):  
Faik N. Oktar ◽  
H. Aydin ◽  
Gültekin Göller ◽  
Simeon Agathopoulos ◽  
G. Rocha ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Scanning Electron Microscopy ◽  
Sintering Temperature ◽  
X Ray Diffraction ◽  
Time Saving ◽  
Natural Sources ◽  
X Ray ◽  
Calcination Method ◽  
Scanning Electron

The properties of sintered hydroxyapatite (HA), obtained from bovine femoral shafts via calcination method, were investigated utilizing scanning electron microscopy (SEM) and X-ray diffraction analysis together with measurements of microhardness, density, and compression strength. The production of HA from natural sources is preferred due to money and time saving reasons. The results indicate the new HA materials as promissing in biomedicine, since similar mechanical behaviour was obtained with previous studies.

Sign in / Sign up

Export Citation Format

Share Document