Falls from a height at construction sites caused by incorrect use of collective protection measures

2018 ◽  
Vol 567 (12) ◽  
pp. 22-25
Author(s):  
Andrzej Dąbrowski

This article presents an analysis of accidents caused by falls from a height examined by the National Labour Inspectorate in 2013-2017. Accidents have been analyzed taking into account irregularities related to the use of collective protection measures. 121 events, which had occurred due to the lack or non-use of collective protection measures, were selected for detailed study. The article discusses 10 typical worksites and selected activities performed when accidents took place. It presents a statistical analysis of accidents caused by various irregularities in the use of collective protection measures and it presents descriptions of selected events. Using collective protection measures against falls from a height in the construction industry is an effective preventive technical solution, which does not physically burden workers and does not cause their discomfort at work. Therefore, legal provisions give them priority over personal protective equipment.

2021 ◽  
Vol 70 (1) ◽  
pp. 129-153
Author(s):  
Władysław Harmata ◽  
Dorota Kamionek

The paper characterizes the problem of air pollution with smog. The possibility of SARS-CoV-2 virus transmission on particulate matter and the possibility of infection was analyzed. Individual respiratory protection measures available on the market were analyzed in terms of mass use, taking into account legal and normative requirements. Keywords: personal protective equipment, respiratory protection


2015 ◽  
Vol 23 (2) ◽  
pp. 311-318 ◽  
Author(s):  
Rafiq Muhammad CHOUDHRY

Improvement of safety and productivity are major concerns throughout the construction industry. There is a dearth of efforts that document the need for simultaneous achievement of safety and productivity on construction sites. The objective of this research is to investigate productivity and safety simultaneously on construction projects by con­ducting a survey. In total, 1,800 hard-copy questionnaires were distributed and the response rate was 81%, resulting in 1,454 valid questionnaires for analysis. Safety and productivity were investigated on 25 construction projects by means of statistical analysis. The results indicated that eleven of the fifteen significant findings pertained to safety and the rest to productivity. The results confirmed that it is possible to improve productivity and safety simultaneously on construc­tion projects. All measures were found to be correlated with both safety and productivity. The findings of this research provide practical knowledge to project managers and safety practitioners on construction projects to achieve safety and productivity simultaneously. The methodology of research might be useful for research at other construction projects in other regions and cultures.


2020 ◽  
Vol 5 (3) ◽  
pp. 94-101
Author(s):  
Victor Moraes ◽  
Willames De Albuquerque Soares ◽  
Bianca M. Vasconcelos ◽  
Tomi Zlatar ◽  
Béda Barkokébas Junior

The cost of world-wide accidents represent ≈4% of global Gross Domestic Product each year, which could be minimized or prevented by using adequate Personal Protective Equipment (PPE). Although wearing adequate PPE are mandatory in a number of occupations where workers are exposed to risks, experience show-us that supervision is necessary to ensuring it. The traditional supervision was proved not to be effective enough, making it necessary to turn on technological solutions. The objective of this work was to investigate if RFID technology is a feasible solution for monitoring the usage of PPE on construction sites, giving suggestions which tags to use and characteristics of RFID portals for field applications. The results of laboratory tests show that four antennas with correct disposition on the RFID portal are enough to ensure readability of the worker when passing through it. While six passive tags were tested, two of them were found to be ideal for this purpose: the Web Lite Wet Inlay with a rubber wrap due to its protective characteristics, and the SmartTrac Dog Bone due to its size. In conclusion, the RFID technology was found to be a feasible solution for automatically control the wearing of PPE on construction sites. There is a need for further research on construction sites.


Author(s):  
Engr. Jeferd E. Saong ◽  
Abigail L. Babaran ◽  
Glenn Dale A. Balaho

Construction sites generate high levels of dust typically from concrete, silica, asbestos, cement, wood, stone, and sand. Workers who are exposed to the said environment are faced with the risk of inhaling particulate materials that might lead to adverse respiratory problems. The lack of publication on the awareness of construction workers on the risk associated with silica dust exposure was the basis of the study. This study assessed the level of awareness of construction workers on the risk associated with silica dust exposure and the safety practices to minimize it. Purposive sampling was used in the selection of 65 respondents from different construction sites located in Baguio City, Philippines. A survey questionnaire containing four point Likert scales were used to determine the level of awareness on the health effects, mode of transmission, and sources of silica dust. The study further assessed the level of safety practices in mitigating the effects of silica dust exposure. The respondents were moderately aware (M=2.52) of the health effects, moderately aware (M=2.69) of the mode of transmission, and moderately aware (M=3.08) of the sources of silica dust. The results further showed that the respondents moderately practiced (M=2.84) activities to mitigate the health effects of silica dust exposure and moderately practiced (M=3.17) the use of personal protective equipment in the construction site. The results suggest that construction workers must be made more aware of the health effects of silica dust exposure and, mitigation activities and utilization of personal protective equipment must be strictly imposed in the construction site.


2019 ◽  
Vol 265 ◽  
pp. 07022 ◽  
Author(s):  
Dmitriy Topchiy ◽  
Alexey Yurgaytis ◽  
Evgeniy Babushkin ◽  
Diana Zueva

This article raises problems related to the shortcomings in the existing field of construction supervision and the relationship between participants in the construction process. An article dedicated to the implementation of comprehensive and comprehensive construction supervision at capital construction sites, bringing the construction supervision system to a standard that minimized the customer’s risks and minimized the number of errors in the construction industry. The aim of the article is to find solutions and ways to resolve problems, because of which there are many qualities, as well as the timing of projects for investment and construction activities. On the basis of a statistical analysis of the current situation and world experience, the main proposals for the improvement of construction supervision systems are presented.


2020 ◽  
Vol 3 (2) ◽  
pp. 57
Author(s):  
Icha Rohmah Damayanti Agustin ◽  
Dewi Prihatini ◽  
Isa Ma’rufi

In order to prevent skin disease among worker, both Personal Protective Equipment (PPE) usage and hygiene personal play important role. The objective of this study is to analyse the correlation between PPE usage and hygiene personal toward skin disease among scavenger in TPA Pakusari – Jember. This study was observational analytics, with cross sectional design. The number of participants was 57 scavengers, consist of 36 female and 21 males. The statistical analysis used Cramer’s V by SPSS. The findings of this study is: 1) The PPE usage is correlated toward skin disease, 2) The hygiene personal is correlated toward skin disease. Keyword: skin disease, PPE utilising, hygiene personal


Author(s):  
Valquiria Delani Alves Dias ◽  
David Barbosa de Alencar ◽  
Fábio Soares de Oliveira ◽  
Maria Cristiane Bandeira Santos ◽  
Camily Murrieta V. O. Bezerra

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Andrew Ebekozien

PurposeThe frequent occurrence of hazards, especially on junior staff in developing countries, is a major setback on project delivery. This is because the safety of the construction workers' environment influences their performance. Although a range of literature has addressed safety measures on construction sites, how far is their compliance with personal protective equipment (PPE) on junior staff is yet to receive in-depth studies in Nigeria. Therefore, this study investigated the level of Nigerian construction companies' compliance and proffered possible solutions that intend to improve the implementation of PPE on junior staff.Design/methodology/approachThe data were collected via observation and face-to-face interviews among the selected companies' staff in Lagos and Abuja. The interview is to determine their perceptions regarding compliance with PPE on construction sites.FindingsFindings show that compliance with PPE on junior staff, especially the indigenous construction companies, is poor. This is because monitoring and enforcement are lax by government regulatory agencies. Also, findings show that many international construction companies ensure that junior workers obey site safety measures those mitigate the chance of hazard occurrence during construction as a policy.Research limitations/implicationsThis paper data collection is limited to Abuja and Lagos, and a phenomenology type of qualitative research was employed, but this does not weaken the robustness. Future research is needed to consider adopting a mixed-methods approach.Practical implicationsAs part of this paper's implications, findings recommended that the construction company's safety regulations and policies should be robust and enriched to mitigate site-related hazards via a framework or mechanism, but the government agencies/ministries need to give the enabling direction, strict monitoring and enforcement of PPE on junior staff. This paper intends to stir up the appropriate government authorities for possibly passing the Labour, Safety, Health and Welfare Bill 2012 (updated in 2016) Act into law.Originality/valueThis study demonstrates that the government agencies concern with approval and enforcement of construction site safety needs to reawaken to their responsibilities because of the lax implementation in many sites, especially in indigenous construction sites.


2020 ◽  
Vol 305 ◽  
pp. 00015 ◽  
Author(s):  
Diana-Petronela Burduhos-Nergis ◽  
Costica Bejinariu ◽  
Stefan-Lucian Toma ◽  
Andrei-Catalin Tugui ◽  
Elena-Raluca Baciu

In cases where an explosive atmosphere contains several types of inflammable and/or combustible gases, steams or powders, the protection measures must be appropriate to the highest possible danger. However, the employer must pay special attention to the workplace and to any factor that can influence the working conditions, especially to those related to the workers. Therefore, any device, tool or equipment used by the human operator must possess special properties. In addition to protective clothing, workers who work at heights must receive personal protective equipment against falling that includes multiple linking elements known as carabiners. The carabiners used in this equipment must be made of non-sparking material. The aim of this paper is to propose a spark characteristic improvement of carbon steel used in carabiners manufacturing by deposition of zinc phosphate coating.


Sign in / Sign up

Export Citation Format

Share Document