scholarly journals Improvement of the Thermal Properties of Sorel Cements

2020 ◽  
Author(s):  
Rim Zgueb ◽  
Amal Brichni ◽  
Noureddine Yacoubi
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Thermal Insulation ◽  
Building Material ◽  
Polyvinyl Acetate ◽  
Cement Matrix ◽  
Photothermal Deflection

Sorel cements is a promising building material for insulation applications. Indeed, the effect of polyvinyl acetate polymer on cements has been investigated. The polyvinyl acetate polymer was added to the cement matrix with a percentage of 0, 5, 10, 15 and 20% by weight of Sorel cement. The thermal properties of Sorel cement were determined by photothermal deflection technique. Thermal properties such as thermal conductivity and thermal diffusivity are measured by coincidentally the experimental curves of the photothermal signal with the best corresponding theoretical curves. The results revealed that the incorporation of polyvinyl acetate polymer enhance the thermal insulation and reduce the compressive strength of Sorel cement.

scholarly journals Adequate Correlation between the Physical and Mechanical Properties of Glass Foam

2021 ◽  
Vol 1 (4) ◽  
pp. 14-26
Author(s):  
Lucian Paunescu ◽  
Sorin Mircea Axinte ◽  
Marius Florin Dragoescu ◽  
Felicia Cosmulescu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Insulation ◽  
Coal Fly Ash ◽  
Physical And Mechanical Properties ◽  
Ceramic Foam ◽  
Glass Waste ◽  
Glass Foam

The paper presents experimental results obtained in the manufacturing process of a glass foam by adequate correlation between its physical and thermal properties (density, porosity, thermal conductivity) and mechanical (compressive strength) by a slight controlled overheating of the foamed material. Using a powder mixture of glass waste (87-91.5 %), coal fly ash (3-9 %) and silicon carbide (4-5.5 %) microwave heated at 935-975 ºC by this unconventional technique, constituting the originality of the work, was obtained a glass-ceramic foam with moderate compressive strength (1.8-2.6 MPa) and very low thermal conductivity (0.058-0.070 W/m·K). The material overheating generated a homogeneous porous structure characterized by closed cells with relatively large dimensions (without the tendency to join neighboring cells) making it difficult to transfer heat across the material. The foamed product is suitable for the manufacture of thermal insulation blocks for the inner or outer walls of the building without excessive mechanical stress, being an advantageous alternative by comparison with known types of polymeric or fiberglass thermal insulation materials.

New Photothermal Deflection Method to Determine Thermal Properties of Bulk Semiconductors

2010 ◽  
Vol 297-301 ◽  
pp. 525-530
Author(s):  
Imen Gaied ◽  
Salima Lassoued ◽  
Fredéric Genty ◽  
Noureddine Yacoubi
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Modulation Frequency ◽  
Phase Variation ◽  
Sample Surface ◽  
Halogen Lamp ◽  
Bulk Semiconductors ◽  
Photothermal Deflection ◽  
Modulated Light

In this paper, we present a new Photothermal Deflection Technique (PTD) to determine thermal properties of bulk doped or undoped semiconductor such as GaAs, GaSb, InAs, etc. The method proposed here consists in covering the sample with a thin graphite layer in order to increase the photothermal signal and to ovoid any reflection on the sample surface. This method deals with the analysis of the logarithm of amplitude and phase variation of the photothermal signal versus square root modulation frequency where the sample placed in air is heated by a modulated light beam coming from a halogen lamp. So the best coincidence between experimental curves and corresponding theoretical ones gives simultaneously the best values of thermal conductivity and thermal diffusivity of the sample. These obtained values are in good agreement with those found in literature. The advantage of applying this method in this way lies in its simplicity and its sensibility to both thermal conductivity and thermal diffusivity.

scholarly journals Adequate Correlation between the Physical and Mechanical Properties of Glass Foam

2021 ◽  
Vol 2 (4) ◽  
pp. 14-26
Author(s):  
Lucian Paunescu ◽  
Sorin Mircea Axinte ◽  
Marius Florin Dragoescu ◽  
Felicia Cosmulescu
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Insulation ◽  
Coal Fly Ash ◽  
Physical And Mechanical Properties ◽  
Ceramic Foam ◽  
Glass Waste ◽  
Glass Foam

The paper presents experimental results obtained in the manufacturing process of a glass foam by adequate correlation between its physical and thermal properties (density, porosity, thermal conductivity) and mechanical (compressive strength) by a slight controlled overheating of the foamed material. Using a powder mixture of glass waste (87-91.5 %), coal fly ash (3-9 %) and silicon carbide (4-5.5 %) microwave heated at 935-975 ºC by this unconventional technique, constituting the originality of the work, was obtained a glass-ceramic foam with moderate compressive strength (1.8-2.6 MPa) and very low thermal conductivity (0.058-0.070 W/m·K). The material overheating generated a homogeneous porous structure characterized by closed cells with relatively large dimensions (without the tendency to join neighboring cells) making it difficult to transfer heat across the material. The foamed product is suitable for the manufacture of thermal insulation blocks for the inner or outer walls of the building without excessive mechanical stress, being an advantageous alternative by comparison with known types of polymeric or fiberglass thermal insulation materials.

scholarly journals Thermal properties of cement mortar with different mix proportions

2020 ◽  
Vol 70 (339) ◽  
pp. 224 ◽  
Author(s):  
P. Shafigh ◽  
I. Asadi ◽  
A. R. Akhiani ◽  
N. B. Mahyuddin ◽  
M. Hashemi
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Cement Mortar ◽  
Construction Material ◽  
Physical And Mechanical Properties ◽  
Sem Images ◽  
Heating And Cooling ◽  
Wide Range

The energy required for the heating and cooling of buildings is strongly dependant on the thermal properties of the construction material. Cement mortar is a common construction material that is widely used in buildings. The main aim of this study is to assess the thermal properties of cement mortar in terms of its ther­mal conductivity, heat capacity and thermal diffusivity in a wide range of grades (cement: sand ratio between 1:2 and 1:8). As there is insufficient information to predict the thermal conductivity and diffusivity of a cement mortar from its physical and mechanical properties, the relationships between thermal conductivity and diffu­sivity and density, compressive strength, water absorption and porosity are also discussed. Our results indicate that, for a cement mortar with a 28-day compressive strength in the range of 6–60 MPa, thermal conductivity, specific heat and thermal diffusivity are in the range of 1.5–2.7 W/(m.K), 0.87–1.04 kJ/kg.K and 0.89–1.26 (x10-6 m2/s), respectively. The scanning electron microscope (SEM) images showed that pore size varied from 18 μm to 946 μm for samples with different cement-to-sand ratios. The porosity of cement mortar has a signifi­cant effect on its thermal and physical properties. For this reason, thermal conductivity and thermal diffusivity was greater in cement mortar samples with a higher density and compressive strength.

Thermal Characterization of Carbon-Carbon Composites

2011 ◽  
Author(s):  
Messiha Saad ◽  
Darryl Baker ◽  
Rhys Reaves
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Critical Role ◽  
Carbon Composite ◽  
Flash Method ◽  
Carbon Composites ◽  
Energy Storage Devices ◽  
Graphitized Carbon

Thermal properties of materials such as specific heat, thermal diffusivity, and thermal conductivity are very important in the engineering design process and analysis of aerospace vehicles as well as space systems. These properties are also important in power generation, transportation, and energy storage devices including fuel cells and solar cells. Thermal conductivity plays a critical role in the performance of materials in high temperature applications. Thermal conductivity is the property that determines the working temperature levels of the material, and it is an important parameter in problems involving heat transfer and thermal structures. The objective of this research is to develop thermal properties data base for carbon-carbon and graphitized carbon-carbon composite materials. The carbon-carbon composites tested were produced by the Resin Transfer Molding (RTM) process using T300 2-D carbon fabric and Primaset PT-30 cyanate ester. The graphitized carbon-carbon composite was heat treated to 2500°C. The flash method was used to measure the thermal diffusivity of the materials; this method is based on America Society for Testing and Materials, ASTM E1461 standard. In addition, the differential scanning calorimeter was used in accordance with the ASTM E1269 standard to determine the specific heat. The thermal conductivity was determined using the measured values of their thermal diffusivity, specific heat, and the density of the materials.

Experimental Study on Thermal Properties of Hollow Sphere Structures

2021 ◽  
Vol 407 ◽  
pp. 185-191
Author(s):  
Josef Tomas ◽  
Andreas Öchsner ◽  
Markus Merkel
Keyword(s):  
Thermal Conductivity ◽  
Experimental Study ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Specific Heat ◽  
Hollow Sphere ◽  
Plane Source ◽  
Source Method ◽  
Transient Plane Source ◽  
Transient Plane Source Method

Experimental analyses are performed to determine thermal conductivity, thermal diffusivity and volumetric specific heat with transient plane source method on hollow sphere structures. Single-sided testing is used on different samples and different surfaces. Results dependency on the surface is observed.

scholarly journals Application of sonication and freezing as initial treatments before microwave-vacuum drying of cranberries

2019 ◽  
Vol 2 (22) ◽  
pp. 151-167 ◽  
Author(s):  
Izabela Staniszewska ◽  
Szymon Staszyński ◽  
Magdalena Zielińska
Keyword(s):  
Thermal Conductivity ◽  
Thermal Properties ◽  
Thermal Diffusivity ◽  
Physical Properties ◽  
Color Change ◽  
Vacuum Drying ◽  
Drying Time ◽  
Dried Fruits ◽  
Microwave Vacuum Drying ◽  
Drying Kinetic

The aim of study was to determine the influence of sonication and freezing on the kinetic of the microwave-vacuum drying, energy consumption and physical properties of whole cranberries as well as evaluate the applicability of sonication instead of freezing in order to change their physical properties and the drying kinetic of whole cranberries. Microwave-vacuum drying of whole cranberries with/without initial treatments took from 12 ± 1 to 14.5 ± 0.5 minutes. All of treatments did not significantly shorten the drying time of cranberries. However, they increased SMER values even by 31%. Despite of cryogenic freezing, all of treatments significantly increased the values of Dew. Sonication combined with drying allowed to obtain dried berries characterized by the lowest cohesiveness (0.19±0.02), springiness (0.62±0.02) and chewiness (3.4±0.8 N), while cryogenic freezing combined with drying allowed to obtain dried fruits characterized by highest springiness (0.75±0.03) and low chewiness (3.3±0.5 N). The highest lightness (32.2±0.7), redness (32.6±0.8), and yellowness (11.1±0.7) were found for fruits subjected to initial convective freezing before drying. The efficiency of sonication in color change was comparable to cryogenic freezing and much lower than convective freezing. All of initial treatments increased such thermal properties of dried cranberries as thermal conductivity and thermal diffusivity.

scholarly journals Bio-based rigid polyurethane foam prepared from apricot stone shell-based polyol for thermal insulation application – Part 2: Morphological, mechanical, and thermal properties

BioResources ◽  
2020 ◽  
Vol 15 (3) ◽  
pp. 6080-6094
Author(s):  
Muhammed Said Fidan ◽  
Murat Ertaş
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Thermogravimetric Analysis ◽  
Polyurethane Foam ◽  
Flame Retardants ◽  
Compressive Modulus ◽  
Cell Diameter ◽  
Mechanical And Thermal Properties ◽  
Rigid Polyurethane Foam

The procedure for the liquefaction of apricot stone shells was reported in Part 1. Part 2 of this work determines the morphological, mechanical, and thermal properties of the bio-based rigid polyurethane foam composites (RPUFc). In this study, the thermal conductivity, compressive strength, compressive modulus, thermogravimetric analysis, flammability tests (horizontal burning and limited oxygen index (LOI)) in the flame retardants), and scanning electron microscope (SEM) (cell diameter in the SEM) tests of the RPUFc were performed and compared with control samples. The results showed the thermal conductivity (0.0342 to 0.0362 mW/mK), compressive strength (10.5 to 14.9 kPa), compressive modulus (179.9 to 180.3 kPa), decomposition and residue in the thermogravimetric analysis (230 to 491 °C, 15.31 to 21.61%), UL-94 and LOI in the flame retardants (539.5 to 591.1 mm/min, 17.8 to 18.5%), and cell diameter in the SEM (50.6 to 347.5 μm) of RPUFc attained from liquefied biomass. The results were similar to those of foams obtained from industrial RPUFs, and demonstrated that bio-based RPUFc obtained from liquefied apricot stone shells could be used as a reinforcement filler in the preparation of RPUFs, specifically in construction and insulation materials. Moreover, liquefied apricot stone shell products have potential to be fabricated into rigid polyurethane foam composites.

scholarly journals Compressive strength and thermal properties of spark plasma sintered Al-Al2O3 nanocomposite

2018 ◽  
Vol 50 (1) ◽  
pp. 1-14 ◽  
Author(s):  
Nouari Saheb ◽  
Muhammad Khan
Keyword(s):  
Thermal Conductivity ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Yield Strength ◽  
Coefficient Of Thermal Expansion ◽  
Testing Machine ◽  
Thermal Constant ◽  
Compressive Properties ◽  
Plasma Sintering ◽  
Spark Plasma

In this work, compressive and thermal properties of aluminum, milled aluminum, and Al-10Al2O3 composite processed via ball milling (BM) and spark plasma sintering (SPS) were investigated. The microstructural features of powders and sintered samples were characterized using optical and scanning electron microscopy. A universal testing machine was used to determine the compressive properties of the consolidated samples. The thermal conductivity and coefficient of thermal expansion of the developed materials were characterized using a hot disc thermal constant analyzer and a dilatometer, respectively. The Al-10Al2O3 composite possessed hardness of 1309.7 MPa, yield strength of 311.4 MPa, and compressive strength of 432.87 MPa compared to hardness of 326.3 MPa, yield strength of 74.33 MPa, and compressive strength of 204.43 MPa for aluminum. The Al-10Al2O3 composite had thermal conductivity value 81.42 W/mK compared to value of 198.09 W/mK for aluminum. In the temperature range from 373 K to 723 K, the composite had lower CTEs ranging from 10 ? 10?6 to 22 ? 10?6/K compared to 20 ? 10?6 to 30 ? 10?6/K for aluminum.

Influence of Palm Oil Fibers Length Variation on Mechanical Properties of Reinforced Crude Bricks

2022 ◽  
Author(s):  
Mazhar Hussain ◽  
Daniel Levacher ◽  
Nathalie Leblanc ◽  
Hafida Zmamou ◽  
Irini Djeran Maigre ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Thermal Properties ◽  
Composite Materials ◽  
Physical Properties ◽  
Palm Oil ◽  
Mechanical Characteristics ◽  
Natural Fibers ◽  
Indirect Tensile

Crude bricks are composite materials manufactured with sediments and natural fibers. Natural fibers are waste materials and used in construction materials for reinforcement. Their reuse in manufacturing reinforced crude bricks is eco-friendly and improves mechanical and thermal characteristics of crude bricks. Factors such as type of fibers, percentage of fibers, length of fibers and distribution of fibers inside the bricks have significant effect on mechanical, physical and thermal properties of biobased composite materials. It can be observed by tests such as indirect tensile strength, compressive strength for mechanical characteristics, density, shrinkage, color for physical properties, thermal conductivity and resistivity for thermal properties, and inundation test for durability of crude bricks. In this study, mechanical and physical characteristics of crude bricks reinforced with palm oil fibers are investigated and effect of change in percentage and length of fibers is observed. Crude bricks of size 4*4*16 cm3 are manufactured with dredged sediments from Usumacinta River, Mexico and reinforced with palm oil fibers at laboratory scale. For this purpose, sediments and palm oil fibers characteristics were studied. Length of fibers used is 2cm and 3cm. Bricks manufacturing steps such as sediments fibers mixing, moulding, compaction and drying are elaborated. Dynamic compaction is opted for compaction of crude bricks due to energy control. Indirect tensile strength and compressive strength tests are conducted to identify the mechanical characteristics of crude bricks. Physical properties of bricks are studied through density and shrinkage. Durability of crude bricks is observed with inundation test. Thermal properties are studied with thermal conductivity and resistivity test. Distribution and orientation of fibers and fibers counting are done to observe the homogeneity of fibers inside the crude bricks. Finally, comparison between the mechanical characteristics of crude bricks manufactured with 2cm and 3cm length with control specimen was made.

Sign in / Sign up

Export Citation Format

Share Document