scholarly journals Reflexně seismický výzkum pozdně kenozoické zlomové tektoniky na vybraných lokalitách hornomoravského úvalu

2020 ◽  
Vol 27 (1-2) ◽  
Author(s):  
Ondřej Bábek ◽  
Zuzana Lenďáková ◽  
Tamás Tóth ◽  
Daniel Šimíček ◽  
Ondřej Koukal
Keyword(s):  
Low Cost ◽  
Seismic Facies ◽  
Gravity Gradients ◽  
Seismic Profiles ◽  
Low Velocity ◽  
Shallow Subsurface ◽  
Static Correction ◽  
Reflection Seismic ◽  
Weight Drop ◽  
Siliciclastic Sediments

We measured shallow reflection seismic profiles across the assumed faults in the Late Cenozoic (Pliocene – Holocene) Upper Morava Basin (UMB). The faults in the UMB are indicated by horst-and-graben morphology, differential thickness of Pliocene and Quaternary siliciclastic sediments, considerable gravity gradients a present-day seismicity. Four seismic lines, 380 to 860 m long (fixed geophone spread) were designed to cross the assumed faults at three sites, Mezice, Drahlov and Výšovice. The data were acquired by 24-channel ABEM Terraloc Mk-8 seismic system with PEG-40 accelerated weight drop source and processed by Sandmaier ReflexW and Halliburton Landmark ProMax® seismic processing software. The processing included application of filters (DC shift, scaled windowgain, bandpass frequency and muting), stacking using normal moveout constant velocity stack, additional application of subtrack-mean (dewow) filter, topographic correction and low velocity layer static correction. Distinct reflectors were detected up to 400 ms TWT, which corresponds to maximum depth of 280 and 350 m at 1400 and 1750 km.s-1 velocities, respectively. The observed reflection patterns were classified into three seismic facies, which were interpreted as crystalline rocks (Brunovistulicum) and/or well consolidated Paleozoic sedimentary rocks (SF1), unconsolidated Quaternary siliciclastic sediments (SF2) and semi-consolidated Neogene clays (SF3) based on the cores drilled in their close vicinity. Distinct faults were observed at the Drahlov and Výšovice 2 profile, which coincided with the observed topographic steps between the horsts and grabens. Presence of the fault at the Drahlov profile separating the Hněvotín Horst from the Lutín Graben was demonstrated by independent electrical resistivity tomography profile. On the other hand, another topographic step at the Mezice profile, between the Hněvotín Horst and Olomouc Graben, does not correspond to any seismic indication of a fault. The reflection seismic proved to be useful and relatively low-cost method to visualize the shallow subsurface geology in the Upper Morava Basin.

Seismic tomography studies of cover thickness and near-surface bedrock velocities

Geophysics ◽  
2006 ◽  
Vol 71 (6) ◽  
pp. U77-U84 ◽  
Author(s):  
B. Bergman ◽  
A. Tryggvason ◽  
C. Juhlin
Keyword(s):  
Nuclear Waste ◽  
Velocity Structure ◽  
Synthetic Data ◽  
General Situation ◽  
Seismic Profiles ◽  
Low Velocity ◽  
Near Surface ◽  
Reflection Seismic ◽  
Crystalline Bedrock ◽  
Cover Thickness

Reflection seismic imaging of the uppermost kilometer of crystalline bedrock is an important component in site surveys for locating potential storage sites for nuclear waste in Sweden. To obtain high-quality images, refraction statics are calculated using first-break traveltimes. These first-break picks may also be used to produce tomographic velocity images of the uppermost bedrock. In an earlier study, we presented a method applicable to data sets where the vast majority of shots are located in the bedrock below the glacial deposits, or cover, typical for northern latitudes. A by-product of this method was an estimate of the cover thickness from the receiver static that was introduced to sharpen the image. We now present a modified version of this method that is applicable for sources located in or on the cover, the general situation for nuclear waste site surveys. This modified methodalso solves for 3D velocity structure and static correctionssimultaneously in the inversion process. The static corrections can then be used to estimate the cover thickness. First, we test our tomography method on synthetic data withthe shot points in the bedrock below the cover. Next, we developa strategy for the case when the sources are within the cover. Themethod is then applied to field data from five crooked-line,high-resolution reflection seismic profiles ranging in lengthfrom 2 to [Formula: see text]. The crooked-line profiles make the study 2.5dimensional regarding bedrock velocities. The cover thicknessalong the profiles varies from 0 to [Formula: see text]. Estimated thickness ofthe cover agrees well with data from boreholes drilled near theprofiles. Low-velocity zones in the uppermost bedrock generallycorrelate with locations where reflections from the stackedsections project to the surface. Thus, the method is functional,both for imaging the uppermost bedrock velocities as well as for estimating the cover thickness.

3-D high‐resolution reflection seismic imaging of unconsolidated glacial and glaciolacustrine sediments: processing and interpretation

Geophysics ◽  
2000 ◽  
Vol 65 (1) ◽  
pp. 18-34 ◽  
Author(s):  
Frank Büker ◽  
Alan G. Green ◽  
Heinrich Horstmeyer
Keyword(s):  
High Resolution ◽  
Cross Sections ◽  
Guided Waves ◽  
Three Dimensional ◽  
High Amplitude ◽  
Seismic Facies ◽  
Small Scale ◽  
Shallow Subsurface ◽  
Reflection Seismic ◽  
Reflecting Boundaries

Shallow 3-D seismic reflection techniques have been used to map glacial deposits in a Swiss mountain valley. A dense distribution of source and receiver positions resulted in a small subsurface sampling of 1.5 m × 1.5 m and a high fold of >40. Common processing operations that included pseudotrue amplitude scaling, deconvolution, and band‐pass filtering successfully enhanced shallow reflections relative to source‐generated noise. Careful top muting helped avoid erroneous stacking of direct and guided waves. Azimuth‐dependent velocity analyses proved to be unnecessary. Three‐dimensional (3-D) migration of the stacked data yielded the final high‐resolution images of the shallow subsurface (15–170 m). Because most reflections and diffractions were migrated to their correct subsurface locations, confident interpretations of 3-D structures were possible. Time slices and cross‐sections along arbitrary directions proved to be powerful analysis tools. Even small‐scale features (<20 m wide), such as subglacial channels and troughs, could be mapped. Five major lithologic units separated by four principal reflecting boundaries were distinguished on the basis of their characteristic seismic facies. The principal reflecting boundaries were semiautomatically tracked through the 3-D data volume. Borehole information allowed the uppermost boundary at 15–27 m to be identified as the top of a 68–80-m-thick sequence of basal and reworked tills characterized by high‐amplitude discontinuous to quasi‐continuous reflections. Low reflectivity of seismic units above and below the till units was associated with finely layered or massive glaciolacustrine clay/silt deposited during and after two principal phases of glaciation (Würm at 28 000 to 10 000 and Riss at 200 000 to 100 000 years before the present). Top of Tertiary Molasse basement was delineated by prominent east‐dipping reflections at variable depths of 85–170 m.

Seismic stratigraphy of the late Quaternary sedimentary infill of Lac d'Armor (Kerguelen archipelago): a record of glacier retreat, sedimentary mass wasting and southern Westerly intensification

2012 ◽  
Vol 24 (6) ◽  
pp. 608-618 ◽  
Author(s):  
Katrien Heirman ◽  
Marc De Batist ◽  
Fabien Arnaud ◽  
Jacques-Louis De Beaulieu
Keyword(s):  
Late Quaternary ◽  
Seismic Stratigraphy ◽  
Seismic Facies ◽  
Lake Basin ◽  
Last Deglaciation ◽  
Seismic Profiles ◽  
Reflection Seismic ◽  
Dense Grid ◽  
Sedimentary Mass ◽  
Kerguelen Archipelago

AbstractLac d'Armor (49°27′S, 69°42′E) is a medium-sized, fjord-type lake located on the ‘Grande Terre’ island of the Kerguelen archipelago. A dense grid of high-resolution reflection seismic profiles was collected from this lake basin. The seismic stratigraphic facies reveal a last deglaciation to Holocene infill comparable to the seismic facies found in other glacigenic lakes all over the world. Remarkable features in the seismic stratigraphy are mounded structures found at the southern edge of both sub-basins. The sediment mounds can be interpreted as sediment drifts created by wind-induced bottom currents. The onset of the build-up of these drifts initiated at some point in the Holocene and indicates a strengthening of the southern Westerlies, which are currently the dominant winds on this island.

scholarly journals Tertiary development of the Faeroe-Rockall Plateau based on reflection seismic data

1994 ◽  
Vol 41 ◽  
pp. 162-180
Author(s):  
L O. Baldreel ◽  
M.S. Andersen
Keyword(s):  
Seismic Data ◽  
Seismic Facies ◽  
Early Eocene ◽  
Ne Atlantic ◽  
Seismic Profiles ◽  
Norwegian Sea ◽  
Reflection Seismic ◽  
The North ◽  
Rockall Trough ◽  
Ne Atlantic Ocean

The Faeroe-Rockall Plateau is located in the NE Atlantic Ocean between Iceland and Scotland and is characterized by a late Paleocene-early Eocene basalt cover, which was extruded in association with the incipient opening of the NE Atlantic. The Faeroe-Rockall Plateau is separated from the NW European continental shelf by the Rockall Trough and the Faeroe­Shetland Channel, whose nature and age is still debated. Reflector configuration within the basalt allows volcanic seismic facies inteipretation to be carried out. The thickness of the basalt cover is estimated from reflection seismic data. Subbasalt geological structures are identified below subaerially extruded basalt on recently acquired as well as reprocessed seismic profiles. Overlying the basalt are early Eocene and younger Sediments. The distribution of these sedi- . ments is largely controlled by 1) the topography after the cessation of the volcanism, 2) the post volcanic subsidence of the area which is estimated from the depth to the breakpoints located on prim¥)' volcanic escaipments, 3) the Eocene-Miocene compressional tectonics which formed ridge& and minor basins, and 4) bottom currents of Norwegian Sea Deep Water (NSDW) which in the Neogene flowed into the North Atlantic south of the Greenland-Iceland-Faeroe-Scotland Ridg,e. A considerable part of the NSDW flows east and south of th

scholarly journals Unraveling the shallow geology of the western Wadden Sea using high resolution seismics

2012 ◽  
Vol 91 (3) ◽  
pp. 341-355 ◽  
Author(s):  
B.F. Paap ◽  
C.W. Dubelaar ◽  
J.L. Gunnink ◽  
A.P. Oost
Keyword(s):  
High Resolution ◽  
Cross Sections ◽  
Seismic Data ◽  
Wadden Sea ◽  
Seismic Facies ◽  
Middle Pleistocene ◽  
Seismic Profiles ◽  
Hydrogeological Model ◽  
Geological Interpretation ◽  
Shallow Subsurface

AbstractModelling of the shallow subsurface of the Dutch Wadden Sea is merely based on lithological information extracted from a limited amount of core samples. In order to improve the subsurface model and to provide a better basis for engineering purposes, seismic data have recently been acquired, processed and interpreted. This study focuses on the interpretation of seismic data in a pilot area in the southwestern part of the Dutch Wadden Sea near the Afsluitdijk. In order to acquire a maximum detail of subsurface information in a time-efficient way, multiple types of seismic systems were deployed simultaneously in a ‘one-sweep-survey’, providing information over depth ranges up to 60 m subsurface depth. Data from three seismic systems are presented; a chirp system, a boomer and sparker source in combination with hydrophone streamers. Geological interpretation of the seismic data was made by identifying seismic facies units and subsequently correlating them to geological cross-sections, running parallel to the Afsluitdijk. Geological cross-sections were derived from the existing geological and hydrogeological model and from relatively densely spaced borehole information. Six key reflectors were identified on the seismic data along the Dutch Afsluitdijk that make up four seismic facies units. Results of seismic profiles show good recognition of internal structures in especially Holocene sediments. A clay plug and a shallowing of a channel at the eastern side of the pilot area were interpreted as channel infills resulting from the rather sudden dominance by newer tidal channels to the west, probably coinciding with the opening of the Marsdiep channel. The channel wall deposits observed were interpreted as a turning of the drainage channel after closure of the IJsselmeer. Strong reflections of deeper levels (>15 m below Dutch vertical datum, i.e. N.A.P.) were interpreted as clay/sand interfaces in the Middle-Pleistocene Urk Formation and were more continuous than previously thought. It is concluded that high resolution seismics add valuable information yielding improved understanding of the sedimentary structure of the shallow subsurface, which in turn can be useful for near future engineering works along the Afsluitdijk.

scholarly journals Integrated magnetotelluric and seismic investigation of Cenozoic graben structure near Obrzycko, Poland

2021 ◽  
Author(s):  
Adam Cygal ◽  
Michał Stefaniuk ◽  
Anna Kret
Keyword(s):  
Seismic Data ◽  
Geophysical Methods ◽  
Geological Structure ◽  
Data Sets ◽  
Low Velocity ◽  
Shallow Subsurface ◽  
Geophysical Model ◽  
Novel Approach ◽  
Loose Deposits ◽  
Static Corrections

AbstractThis article presents the results of an integrated interpretation of measurements made using Audio-Magnetotellurics and Seismic Reflection geophysical methods. The obtained results were used to build an integrated geophysical model of shallow subsurface cover consisting of Cenozoic deposits, which then formed the basis for a detailed lithological and tectonic interpretation of deeper Mesozoic sediments. Such shallow covers, consisting mainly of glacial Pleistocene deposits, are typical for central and northern Poland. This investigation concentrated on delineating the accurate geometry of Obrzycko Cenozoic graben structure filled with loose deposits, as it was of great importance to the acquisition, processing and interpretation of seismic data that was to reveal the tectonic structure of the Cretaceous and Jurassic sediments which underly the study area. Previously, some problems with estimation of seismic static corrections over similar grabens filled with more recent, low-velocity deposits were encountered. Therefore, a novel approach to estimating the exact thickness of such shallow cover consisting of low-velocity deposits was applied in the presented investigation. The study shows that some alternative geophysical data sets (such as magnetotellurics) can be used to significantly improve the imaging of geological structure in areas where seismic data are very distorted or too noisy to be used alone

STACKING OF REFLECTIONS FROM COMPLEX STRUCTURES

Geophysics ◽  
1974 ◽  
Vol 39 (4) ◽  
pp. 427-440 ◽  
Author(s):  
Max K. Miller
Keyword(s):  
Deep Structure ◽  
Control Model ◽  
Layer Model ◽  
Low Velocity ◽  
Seismic Reflection Data ◽  
Near Surface ◽  
Static Correction ◽  
Reflection Data ◽  
Actual Field ◽  
Interval Velocities

Common‐depth‐point seismic reflection data were generated on a computer using simple ray tracing and analyzed with processing techniques currently used on actual field recordings. Constant velocity layers with curved interfaces were used to simulate complex geologic shapes. Two models were chosen to illustrate problems caused by curved geologic interfaces, i.e., interfaces at depths which vary laterally in a nonlinear fashion and produce large spatial variations in the apparent stacking velocity. A three‐layer model with a deep structure and no weathering was used as a control model. For comparison, a low velocity weathering layer also of variable thickness was inserted near the surface of the control model. The low velocity layer was thicker than the ordinary thin weathering layers where state‐of‐the‐art static correction methods work well. Traveltime, moveout, apparent rms velocities, and interval velocities were calculated for both models. The weathering introduces errors into the rms velocities and traveltimes. A method is described to compensate for these errors. A static correction applied to the traveltimes reduced the fluctuation of apparent rms velocities. Values for the thick weathering layer model were “over corrected” so that synclines (anticlines) replaced false anticlines (synclines) for both near‐surface and deep zones. It is concluded that computer modeling is a useful tool for analyzing specific problems of processing CDP seismic data such as errors in velocity estimates produced by large lateral variations in overburden.

scholarly journals Visual Measurement System for Wheel–Rail Lateral Position Evaluation

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1297
Author(s):  
Viktor Skrickij ◽  
Eldar Šabanovič ◽  
Dachuan Shi ◽  
Stefano Ricci ◽  
Luca Rizzetto ◽  
...  
Keyword(s):  
Measurement System ◽  
Inertial Sensor ◽  
Low Cost ◽  
Image Point ◽  
Low Velocity ◽  
Point Selection ◽  
Lateral Direction ◽  
Initial Field ◽  
Visual Measurement ◽  
Track Geometry

Railway infrastructure must meet safety requirements concerning its construction and operation. Track geometry monitoring is one of the most important activities in maintaining the steady technical conditions of rail infrastructure. Commonly, it is performed using complex measurement equipment installed on track-recording coaches. Existing low-cost inertial sensor-based measurement systems provide reliable measurements of track geometry in vertical directions. However, solutions are needed for track geometry parameter measurement in the lateral direction. In this research, the authors developed a visual measurement system for track gauge evaluation. It involves the detection of measurement points and the visual measurement of the distance between them. The accuracy of the visual measurement system was evaluated in the laboratory and showed promising results. The initial field test was performed in the Vilnius railway station yard, driving at low velocity on the straight track section. The results show that the image point selection method developed for selecting the wheel and rail points to measure distance is stable enough for TG measurement. Recommendations for the further improvement of the developed system are presented.

scholarly journals Geophysical imaging of permafrost in the SW Svalbard – the result of two high arctic expeditions to Spitsbergen

2020 ◽  
Author(s):  
Mariusz Majdanski ◽  
Artur Marciniak ◽  
Bartosz Owoc ◽  
Wojciech Dobiński ◽  
Tomasz Wawrzyniak ◽  
...  
Keyword(s):  
Surface Waves ◽  
Active Layer ◽  
High Arctic ◽  
The Arctic ◽  
Seismic Profiles ◽  
Frozen Ground ◽  
Near Surface ◽  
Seismic Processing ◽  
Reflection Seismic ◽  
Sea Coast

&lt;p&gt;The Arctic regions are the place of the fastest observed climate change. One of the indicators of such evolution are changes occurring in the glaciers and the subsurface in the permafrost. The active layer of the permafrost as the shallowest one is well measured by multiple geophysical techniques and in-situ measurements.&lt;/p&gt;&lt;p&gt;Two high arctic expeditions have been organized to use seismic methods to recognize the shape of the permafrost in two seasons: with the unfrozen ground (October 2017) and frozen ground (April 2018). Two seismic profiles have been designed to visualize the shape of permafrost between the sea coast and the slope of the mountain, and at the front of a retreating glacier. For measurements, a stand-alone seismic stations has been used with accelerated weight drop with in-house modifications and timing system. Seismic profiles were acquired in a time-lapse manner and were supported with GPR and ERT measurements, and continuous temperature monitoring in shallow boreholes.&lt;/p&gt;&lt;p&gt;Joint interpretation of seismic and auxiliary data using Multichannel analysis of surface waves, First arrival travel-time tomography and Reflection imaging show clear seasonal changes affecting the active layer where P-wave velocities are changing from 3500 to 5200 m/s. This confirms the laboratory measurements showing doubling the seismic velocity of water-filled high-porosity rocks when frozen. The same laboratory study shows significant (&gt;10%) increase of velocity in frozen low porosity rocks, that should be easily visible in seismic.&lt;/p&gt;&lt;p&gt;In the reflection seismic processing, the most critical part was a detailed front mute to eliminate refracted arrivals spoiling wide-angle near-surface reflections. Those long offset refractions were however used to estimate near-surface velocities further used in reflection processing. In the reflection seismic image, a horizontal reflection was traced at the depth of 120 m at the sea coast deepening to the depth of 300 m near the mountain.&lt;/p&gt;&lt;p&gt;Additionally, an optimal set of seismic parameters has been established, clearly showing a significantly higher signal to noise ratio in case of frozen ground conditions even with the snow cover. Moreover, logistics in the frozen conditions are much easier and a lack of surface waves recorded in the snow buried geophones makes the seismic processing simpler.&lt;/p&gt;&lt;p&gt;Acknowledgements&amp;#160; &amp;#160; &amp;#160; &amp;#160; &amp;#160; &amp;#160; &amp;#160; &amp;#160;&lt;/p&gt;&lt;p&gt;This research was funded by the National Science Centre, Poland (NCN) Grant UMO-2015/21/B/ST10/02509.&lt;/p&gt;

scholarly journals Lithoprobe-Phase 1: southern Vancouver Island: preliminary analyses of reflection seismic profiles and surface geological studies

1985 ◽  
Author(s):  
C J Yorath ◽  
R M Clowes ◽  
A G Green ◽  
A Sutherland-Brown ◽  
M T Brandon ◽  
...  
Keyword(s):  
Phase 1 ◽  
Vancouver Island ◽  
Seismic Profiles ◽  
Reflection Seismic
Sign in / Sign up

Export Citation Format

Share Document