scholarly journals Assessment of the Position of the Mandibular Foramen and Mandibular Lingula in Children and Adolescents using CBCT

2021 ◽  
Vol 48 (1) ◽  
pp. 64-76
Author(s):  
Jihye Lee ◽  
Namki Choi ◽  
Byunggee Kim ◽  
Seonmi Kim

The purpose of this study is to evaluate the position of the mandibular foramen and location and morphological characteristics of the mandibular lingula using Cone-Beam Computed Tomography (CBCT).Mandibular CBCT images of children aged 6 - 16 years were collected. A total of 180 patients were divided into 3 groups, 6 - 7, 10 - 11 and 15 - 16 years, with 30 male and female patients per group. Either side of the ramus was analyzed. The shortest distances from the anterior, posterior, superior and inferior border of the ramus to the mandibular lingula were measured. The shortest distance between the mandibular lingula and the mandibular foramen was also measured. The vertical distance from the mandibular lingula and the mandibular foramen to the occlusal plane was measured. The shapes of the mandibular lingula was classified into 4 types according to the criteria.The distances of the mandibular lingula from the anteroposterior and vertical reference points of the ramus increased in all directions with age. The distance between the mandibular lingula and the mandibular foramen also increased with age. The location of the mandibular lingula and the mandibular foramen in relation to the occlusal plane moved upwards with age. The most common shape of the mandibular lingula was triangular, followed by nodular, truncated and assimilated, and there was no difference in the shape according to age.It is recommended that the horizontal insertion point of the anesthesia from the anterior border of the ramus increased to 17 mm, 18 mm, and 19 mm according to the age groups. It is also suggested that the vertical insertion point increased by 2 - 3 mm, 5 - 6 mm and 9 - 10 mm above the occlusal plane according to the age groups.

2014 ◽  
Vol 17 (4) ◽  
pp. 74
Author(s):  
Abbas Shokri ◽  
Sepideh Falah-Kooshki ◽  
Jalal Poorolajal ◽  
Atena Karimi ◽  
Farzaneh Ostovarrad

<p><strong>Objective: </strong>Mandibular foramen (MF) is located on the internal surface of the ramus through which blood vessels and nerves pass. Determination of the anatomic position of the MF is very important in inferior alveolar nerve block anesthesia (IANBA), ramus osteotomy and surgical procedures of the posterior angle of mandibular ramus. The aim of this study was to determine anatomic position of the MF using anatomic landmarks on the three dimensional CBCT images. <strong>Material and </strong><strong>Methods: </strong>A total of 103 CBCT images was evaluated. The NNT Viewer software program was used to measure the distances between the lines tangent on the MF periphery and the anterior border of the ramus, the posterior border of the ramus, the inferior border of the mandible, and the coronoid notch in mm by to age and gender. <strong>Results: </strong>The results showed a slight difference in anatomic dimensions between the right and left sides, with no significant differences. The anatomic dimensions of the MF on both sides were a little bigger in males than in females. There were no significant differences in the anatomic dimensions of superior-inferior and anterior-posterior dimensions of the left and right sides in different age groups. <strong>Conclusion: </strong>No significant changes occur in the position of the MF with age. The anatomic differences between males and females should be taken into account during IANBA procedures. Males have bigger jaws than females; therefore, there is a longer distance between the MF and the anatomic landmarks evaluated. </p><p><strong>Keywords</strong>: Mandibular Foramen; Anatomic Landmarks; Cone-Beam Computed Tomography</p>


Author(s):  
Milica Filipović ◽  
Veroljub Stanković ◽  
Milan Čoh ◽  
Biljana Vitošević ◽  
Dragana Radosavljević

The aim of the present study was to identify the relationship between morphological parameters and motor skills that are important for sprint performance in children aged 8 to 16 years divided into four age groups (U10, U12, U14, U16) in both genders. The sample consisted of two hundred eighty one participant who trained sprinting in various athletic clubs. A prediction set of twenty-five variables for assessing morphological characteristics and motor skills was applied, and the criterion variable was a sprint at 60m. Using multiple correlation, it has been established that a large number of morphological characteristics are statistically significant positive correlation with the sprint, especially the longitudinal variables, while the variables of skinfolds showed a low negative statistical significance in relation to the given criterion. In the field of motor skills, the highest number of positive statistically significant correlations were found in the tests of explosive power of the upper and lower extremities, agility test and horizontal and vertical jump tests. In order to determine which morphological features and motor skills should be applied in sprint running training, we tested related attributes using different algorithms for data mining (LR, M5, KNN, SVM, MLP, RBF). The results suggests that the predictors that we use can continue to be applied with high reliability in assessing sprint performance, but also in the monitoring of the training process in order to profile the better sprint achievements.


2019 ◽  
Vol 8 (3) ◽  
pp. 112-116
Author(s):  
Muhammad Azeem ◽  
Muhammad Mudassar Saleem ◽  
Zubair Hassan Awaisi ◽  
Muhammad Imran Saleh ◽  
Zubair Ahmed ◽  
...  

Background: Few studies have been reported so far on the frequency of lower third molar impactions in patients with different morphological characteristics. Our aim in this study was to find out the frequency of impacted lower third molars in orthodontic patients with different antegonial notch depths. Material and Methods: This cross-sectional research was conducted at Orthodontics Department of Dental Section, Faisalabad Medical University, Faisalabad, and de’Montmorency College of Dentistry, Lahore, Pakistan from June 2017 to June 2019. A total of 60 orthopantomograms (OPGs) of patients with impacted lower third molars were included. The depth of antegonial notch was calculated on all the selected OPGs by measuring distance between the deepest area of the notch cavity and the tangent on the inferior border of the mandible. The patients with depth of antegonial notch of 1 mm or less were labeled as having shallow antegonial notch, while those with 3 mm or more were considered as having deep antegonial notch. Percentages and mean + SD were calculated for different variables. Depth of antegonial notching was compared between genders using ANOVA with P-value <0.5 considered as significant. Results: Of 60 orthodontic patients, there was an equal number of male and female patients (n=30). The average age of the patients was 25.5±4 years. Overall frequency of impactions was similar in both the genders and frequency of impacted lower third molars was found to be greater in patients with deeper antegonial notches. Conclusion: Mandibular third molar impactions were most frequent in orthodontic patients with deep antegonial notches


2000 ◽  
Vol 125 (5) ◽  
pp. 567-575 ◽  
Author(s):  
Cayetana Schluter ◽  
Zamir K. Punja

Morphological characteristics of flowers, duration of flowering, degree of self-pollination, and extent of berry and seed production in North American ginseng (Panax quinquefolius L.) were studied under controlled environmental conditions as well as under field conditions. A comparison was also made between plants of 3 and 4 years of age at two field locations. The duration of flowering was ≈4 weeks and was similar in plants of both age groups grown in the two environments; however, 4-year-old plants produced an average of 40% more flowers (≈100 per plant in total) compared to 3-year-old plants. Flowers were comprised of five greenish-colored petals, five stamens, and an inferior ovary consisting of predominantly two fused carpels and stigmatic lobes. Anthers dehisced in staggered succession within individual flowers, and flowering began with the outermost edge of the umbel and proceeded inwards. At any given time during the 4-week flowering period, ≈10% of the flowers in an umbel had recently opened and were producing pollen. Stigma receptivity was associated with separation of the stigmatic lobes; this occurred at some time after pollen release. Growth of pollen tubes through the style in naturally pollinated flowers was most evident when the stigmatic lobes had separated. The proportion of flowers that developed into mature berries (pollination success rate) was in the range of 41% to 68% for both 3-year-old and 4-year-old plants. However, when the inflorescence was bagged during the flowering period, berry formation was increased by 13% to 21% in 4-year-old plants, depending on location. A majority of the berries (92% to 99%) contained one or two seeds in an almost equal frequency, with the remaining berries containing three seeds. In 4-year-old plants, the frequency of two-seeded berries was increased by ≈13% by bagging the inflorescence. These observations indicate that P. quinquefolius is highly self-fertile and that several physiological and environmental factors can affect seed production.


2019 ◽  
Vol S (1) ◽  
pp. 11-14
Author(s):  
Lamiaa A. Hasan ◽  
◽  
Nada M. Al-Sayagh ◽  
Lara R. Al-Banaa ◽  
◽  
...  

Objective: The objective of this study was to evaluate the biomechanical effect of mandibular corpus distraction osteogenesis with different orientations and rates. Materials and Methods: A three-dimensional model of the mandible was created. The vertical surgical cut was made, the force was applied horizontally in a bidirectional manner within two orientations: parallel to the occlusal plane and parallel to the inferior border of the mandible with three rates (0.5mm, 1mm and 1.5mm). Results: The maximum values for von Mises stress when the force was applied parallel to the inferior border of the mandible with all three rates were smaller than those with force direction parallel to the occlusal plane. The displacement in all three directions x, y, and z were not parallel and prominent in the anterior part of the mandible, while the movement at the posterior part is negligible, x and z displacement were bigger when force was applied parallel to the inferior border of the mandible, z displacement was more prominent than x and y displacement, both directions produced upward rotation of the mandible, this rotation was more noticeable when the force was applied parallel to the inferior border of the mandible. Conclusions: A vertical cut can be used in the patient with a long anterior face. This site of distraction achieves more lengthening of mandible than expansion.


2020 ◽  
Vol 19 (4) ◽  
pp. 10-14
Author(s):  
Z. Masna

The individual face shape, the ratio of its proportions, the articulation capabilities of each person to a significant extent depend on the characteristics of occlusion and occlusion, in turn, are determined by the size, shape and ratio of dental, alveolar and basal arches. Two of them - alveolar and basal - pass at the corresponding levels of the alveolar areas of the jaws, which means that it is almost impossible to correct them, therefore they play the role of landmarks for setting the dental arch during dental prosthetics. A full-fledged aesthetic and functional restoration of the maxillofacial region after prosthetics largely depends on the dentist taking into account the individual morphological characteristics of the jaws, their cellular areas and specifically the morphometric parameters of the collar and basal arches. In order to determine the possible variants of the shape of the alveolar and basal arches of the upper jaw and the patterns of their ratio during the routine dental examination, 55 people (27 men and 28 women) aged 21-60 years with preserved maxillary dentition were examined. It has been established that the alveolar and basal arches of the upper jaw can have the shape of five geometric shapes: an oval, a semicircle, an ellipse, a trapezoid or a square. In this case, the shape of the collar and basal arches can coincide or be combined in various combinations. The analysis of the obtained results showed that in men the alveolar arch most often had the shape of an oval (70%), in women - an oval or semicircle (43%, respectively). With the aim of possible variants of the alveolar and basal arches form determination and peculiarities of their correlation 55 individuals (27 men and 28 women) in age of 21-60 years with the preserved teeth row were examined during planned dental examination. All examined were patients of the “Dental clinic of dr. Dakhno” (Kyiv). Computer tomographic investigation was made to these patients according to medical indications, scanning was made parallely to the occlusal plane. Image reconstruction was conducted with the use of highly dimentional bone algorithm. Alveolar and basal arch form of the upper jaw were determined on the images. It was established that alveolar and basal arches of the upper jaw can have a form of five geometrical figures: oval, semicircle, ellipse, trapeze or square. Form of the alveolar and basal arches can match or can combine in different combinations. Received results analysis testified that alveolar arch has a form of the oval in men and oval or semicircle – in women. Basal arch in men also most frequently has a form of oval, less often – semicircle, square and trapeze. In women basal arch more often has a form of trapeze or semicircle, less often – oval or square. In men alveolar and basal arches form matched in 41% of cases, in women – only in 31% of cases among total amount of all examined individuals. Most often alveolar and basal arches matched in the form of oval and semicircle, only in one case arches of the trapeze form matched in man, in woman – square form. Maxillary alveolar and basal arches form variants analysis let to determine areas, where distance between alveolar crests was maximal. Most variable this index was in individuals with the oval form of the alveolar arch on the level of 16-26, 17-27 or 18-28 teeth. Peculiarities of the alveolar and basal arches form of the alveolar process of the upper jaw in male and female individuals are characterized with expressed individual variability. These peculiarities consideration during dental prosthesis let avoid series of complications connected with the pressure redistribution on the osseous tissue of the jaws during articulation. 


Agronomy ◽  
2019 ◽  
Vol 9 (6) ◽  
pp. 284 ◽  
Author(s):  
Difo Voukang Harouna ◽  
Pavithravani B. Venkataramana ◽  
Athanasia O. Matemu ◽  
Patrick Alois Ndakidemi

The insufficient food supply due to low agricultural productivity and quality standards is one of the major modern challenges of global agricultural food production. Advances in conventional breeding and crop domestication have begun to mitigate this issue by increasing varieties and generation of stress-resistant traits. Yet, very few species of legumes have been domesticated and perceived as usable food/feed material, while various wild species remain unknown and underexploited despite the critical global food demand. Besides the existence of a few domesticated species, there is a bottleneck challenge of product acceptability by both farmers and consumers. Therefore, this paper explores farmers’ perceptions, preferences, and the possible utilization of some wild Vigna species of legumes toward their domestication and exploitation. Quantitative and qualitative surveys were conducted in a mid-altitude agro-ecological zone (Arusha region) and a high altitude agro-ecological zone (Kilimanjaro region) in Tanzania to obtain the opinions of 150 farmers regarding wild legumes and their uses. The study showed that very few farmers in the Arusha (28%) and Kilimanjaro (26%) regions were aware of wild legumes and their uses. The study further revealed through binary logistic regression analysis that the prior knowledge of wild legumes depended mainly on farmers’ location and not on their gender, age groups, education level, or farming experience. From the experimental plot with 160 accessions of wild Vigna legumes planted and grown up to near complete maturity, 74 accessions of wild Vigna legumes attracted the interest of farmers who proposed various uses for each wild accession. A Χ2 test (likelihood ratio test) revealed that the selection of preferred accessions depended on the farmers’ gender, location, and farming experience. Based on their morphological characteristics (leaves, pods, seeds, and general appearance), farmers perceived wild Vigna legumes as potentially useful resources that need the attention of researchers. Specifically, wild Vigna legumes were perceived as human food, animal feed, medicinal plants, soil enrichment material, and soil erosion-preventing materials. Therefore, it is necessary for the scientific community to consider these lines of farmers’ suggestions before carrying out further research on agronomic and nutritional characteristics toward the domestication of these alien species for human exploitation and decision settings.


2006 ◽  
Vol 76 (6) ◽  
pp. 996-1003 ◽  
Author(s):  
Toshiya Endo ◽  
Rieko Ozoe ◽  
Sugako Yoshino ◽  
Shohachi Shimooka

Abstract Objective: The purpose of this study was to explore the association of hypodontia patterns and variations in craniofacial morphology in Japanese orthodontic patients. Materials and Methods: A total of 50 girls with hypodontia (the total group) were selected and categorized into anterior, posterior, and anterior-posterior groups according to the location of the congenitally missing teeth. By using the lateral cephalograms of each subject, 28 angular and 37 linear measurements were made. The cephalometric data were statistically analyzed and compared among the groups and with the Japanese cephalometric standards from 36 age-matched female subjects without hypodontia or malocclusion (the control group). Results: Every hypodontia group showed shorter anterior and overall cranial base lengths, shorter maxillary length, greater retroclination and elongation of mandibular incisors, and a larger interincisal angle than the control group. The total and anterior-posterior groups especially exhibited a significantly more prognathic mandible, larger retroclination of maxillary incisors, and a more counterclockwise-rotated occlusal plane. Furthermore, these skeletal and dental deviations were more remarkable in the anterior-posterior group than in either the anterior or the posterior group. Anterior hypodontia exerted as much influence on craniofacial morphology as posterior hypodontia. Conclusions: When orthodontic treatment is performed on patients with hypodontia, not only the number but also the distribution of missing teeth should be taken into consideration, though there was no significant difference in craniofacial morphology between anterior hypodontia and posterior hypodontia.


1995 ◽  
Vol 16 ◽  
pp. 75-82
Author(s):  
S. C. Mehta ◽  
P. K. Vij ◽  
B. K. Joshi ◽  
R. Sahai ◽  
A. E. Nivsarkar

SUMMARYObservations were recorded on morphological characteristics, body weights and body measurements of 344 Malpura sheep belonging to nine age groups during a survey conducted in 18 randomly selected villages of three blocks of the Chittorgarh district of Rajastha. The body weights at birth, 1, 3, 6 and 9 months and adult weight averaged 3.3, 6.7±0.88, 12.9±0.71, 16.4±0.71, 21.0±1.00 and 31.4 kg respectively. Height, body length, chest girth, paunch girth, face length, face width, tail length and ear length of adult Malpura sheep averaged 63.6, 66.8, 77.1, 80.9, 20.7, 9.8, 30.3 and 6.3 cm respectively. Sex of the animal had significant effect on weight, height, body length and chest girth at 8 teeth stage. Phenotypic correlations of body weight with height, chest girth and paunch girth ranged from 0.76±0.04 to 0.88±0.03 and regression of weight on these body measurements ranged from 0.63±0.02 to 0.98±0.05.


Sign in / Sign up

Export Citation Format

Share Document