ANALYSIS OF CLIMATE CONTROL IN A CROP ROTATION GREENHOUSE

10.6036/10180 ◽  
2021 ◽  
Vol DYNA-ACELERADO (0) ◽  
pp. [4p]-[4p]
Author(s):  
ANTONIO RUIZ CELMA ◽  
JOSE LUIS SALMERON SILVERA ◽  
ELENA PULIDO GRANADO ◽  
JOSE MARIA MERA BRAVO
Keyword(s):  
Solar Radiation ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Agricultural Sector ◽  
Renewable Energy Sources ◽  
Renewable Energies ◽  
Practical Case ◽  
Climate Control ◽  
Productivity Improvement ◽  
Intervening Factors

The development of energy policies aimed at reducing energy consumption and the environmental impact together with the importance of the agricultural sector and its associated industries in certain regions, such as Extremadura, where most of the agricultural production is carried out by traditional cultivation systems, makes that the use of land that is not naturally suitable for crops and get a productivity improvement thanks climate control through renewable energies in greenhouses it and interested proposal. So the purpose of this work is assist small farmers in obtaining the fruits demanded by the market, through the use of renewable energies and the use of soils that are not very favourable for cultivation, contributing to achieve an economically profitable and environmentally sustainable agriculture. The intervening factors are the outdoor climate throughout the year, the interior requirements for the crop-sequence and the covering greenhouse with auxiliary energy supply, it's possible estimate the energy demand throughout the year and the contribution of each source to this demand, contrasted with a practical case study in Extremadura. The estimated result for this case it is an energy demand of 9 GJ/m2 with 62 % covered by solar radiation, 33 % by natural ventilation systems, 3 % with refrigeration and 2 % covered by heating. An economic analysis of the operation is included, taking into account the main intervening factors. In conclusion, thanks to greenhouse cultivation, by means of current fertigation systems that allow the use of the most suitable solution to be added to the irrigation water it is possible to cultivate in unsuitable soils, controlling the humidity and components present in them, as well as the tension generated by the roots of the plants. The energy demand is satisfied by solar radiation and ventilation mostly, which are renewable sources of energy, by making the contribution of heating by local biomass is covered almost entirely by renewable energy sources.

scholarly journals Sustainable energy supply for self-sufficient buildings with seasonal energy storages – parametric study

2021 ◽  
Vol 2042 (1) ◽  
pp. 012086
Author(s):  
Andrii Zakovorotnyi
Keyword(s):  
Renewable Energy ◽  
Energy Supply ◽  
Energy Demand ◽  
Residential Buildings ◽  
Sustainable Energy ◽  
Renewable Energy Sources ◽  
Evaluation Criteria ◽  
Weather Conditions ◽  
Practical Case ◽  
Sustainable Energy Supply

Abstract To reduce greenhouse gas emissions, the efficiency of energy supply systems must be increased, for example, using renewable energy sources. Since the generation of renewable energy can depend on weather conditions and other parameters, the use of short- or long-term energy storage enables an increase in the covered building energy demand. Due to the large number of available technologies for renewable energy generation and storage, it is possible to combine these systems into different energy supply concepts. By optimizing and comparing the designed concepts, the most suitable one can be determined with respect to the current and future investments. A comprehensive comparison of energy supply concepts must include both economic and energy evaluation criteria. This study focuses on parametric numerical simulations to identify economically feasible and sustainable energy supply concepts for a practical case of new residential buildings. The results show that electrical storage and on-site power generation can provide the greatest benefits. In contrast, large thermal storage systems are not economically viable.

Direct ammonia fueled solid oxide fuel cells: A comprehensive review on challenges, opportunities and future outlooks

2020 ◽  
pp. 70-91 ◽  
Author(s):  
Molla Asmare ◽  
Mustafa Ilbas
Keyword(s):  
Electric Power ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Clean Energy ◽  
Performance Comparison ◽  
Optimum Operating ◽  
Practical Implementation ◽  
Human Society ◽  
Energy Access ◽  
Green Fuel

Nowadays, the most decisive challenges we are fronting are perfectly clean energy making for equitable and sustainable modern energy access, and battling the emerging alteration of the climate. This is because, carbon-rich fuels are the fundamental supply of utilized energy for strengthening human society, and it will be sustained in the near future. In connection with this, electrochemical technologies are an emerging and domineering tool for efficiently transforming the existing scarce fossil fuels and renewable energy sources into electric power with a trivial environmental impact. Compared with conventional power generation technologies, SOFC that operate at high temperature is emerging as a frontrunner to convert the fuels chemical energy into electric power and permits the deployment of varieties of fuels with negligible ecological destructions. According to this critical review, direct ammonia is obtained as a primary possible choice and price-effective green fuel for T-SOFCs. This is because T-SOFCs have higher volumetric power density, mechanically stable, and high thermal shocking resistance. Also, there is no sealing issue problem which is the chronic issues of the planar one. As a result, the toxicity of ammonia to use as a fuel is minimized if there may be a leakage during operation. It is portable and manageable that can be work everywhere when there is energy demand. Besides, manufacturing, onboard hydrogen deposition, and transportation infrastructure connected snags of hydrogen will be solved using ammonia. Ammonia is a low-priced carbon-neutral source of energy and has more stored volumetric energy compared with hydrogen. Yet, to utilize direct NH3 as a means of hydrogen carrier and an alternative green fuel in T-SOFCs practically determining the optimum operating temperatures, reactant flow rates, electrode porosities, pressure, the position of the anode, thickness and diameters of the tube are still requiring further improvement. Therefore, mathematical modeling ought to be developed to determine these parameters before planning for experimental work. Also, a performance comparison of AS, ES, and CS- T-SOFC powered with direct NH3 will be investigated and best-performed support will be carefully chosen for practical implementation and an experimental study will be conducted for verification based on optimum parameter values obtained from numerical modeling.

CURRENT STATE AND PROSPECTS FOR THE DEVELOPMENT OF BIOGAS ENERGY IN UZBEKISTAN

2020 ◽  
Vol 2 (7) ◽  
pp. 171-184
Author(s):  
Z. U. SAIPOV ◽  
◽  
G. A. ARIFDZHANOV ◽  
Keyword(s):  
Renewable Energy ◽  
Organic Waste ◽  
Agricultural Sector ◽  
Renewable Energy Sources ◽  
Energy Resources ◽  
Agricultural Producers ◽  
Biogas Plants ◽  
The Republic ◽  
Rural Producers ◽  
Agricultural Regions

Energy is one of the main pillars of the state’s economy, which is currently facing serious problems due to depletion of mineral energy resources and the threatening environment. As a result, presently around the world there is a rapid growth and development of energy-efficient technologies and the use of renewable energy sources (RES), providing an increase in energy resources, as well as environmental and social effects. One of the most relevant and promising areas of renewable energy development is the disposal and processing of organic waste in biogas plants, and this is particularly relevant in agricultural regions. In this regard, this paper considers the state and prospects for the development of bioenergy in agricultural regions of Uzbekistan, where half of the population of the republic lives. The potential of organic waste from livestock and poultry farming of the agricultural sector was determined, and it was revealed that the use of biogas plants for the disposal of manure and litter is clearly a profitable production and requires close attention from rural producers. The introduction of biogas technologies for the bulk of agricultural producers is an urgent task, that will ensure not only a solution to the waste problem, but it will also provide a solution to energy, agricultural, environmental and social problems in rural regions of the republic.

scholarly journals Techno-Economic Analysis of a Novel Hydrogen-Based Hybrid Renewable Energy System for Both Grid-Tied and Off-Grid Power Supply in Japan: The Case of Fukushima Prefecture

2020 ◽  
Vol 10 (12) ◽  
pp. 4061 ◽  
Author(s):  
Naoto Takatsu ◽  
Hooman Farzaneh
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Economic Assessment ◽  
Energy System ◽  
Modeling Framework ◽  
Integrated Simulation ◽  
Hybrid Renewable Energy System ◽  
Renewable Energy System ◽  
Hybrid Renewable Energy

After the Great East Japan Earthquake, energy security and vulnerability have become critical issues facing the Japanese energy system. The integration of renewable energy sources to meet specific regional energy demand is a promising scenario to overcome these challenges. To this aim, this paper proposes a novel hydrogen-based hybrid renewable energy system (HRES), in which hydrogen fuel can be produced using both the methods of solar electrolysis and supercritical water gasification (SCWG) of biomass feedstock. The produced hydrogen is considered to function as an energy storage medium by storing renewable energy until the fuel cell converts it to electricity. The proposed HRES is used to meet the electricity demand load requirements for a typical household in a selected residential area located in Shinchi-machi in Fukuoka prefecture, Japan. The techno-economic assessment of deploying the proposed systems was conducted, using an integrated simulation-optimization modeling framework, considering two scenarios: (1) minimization of the total cost of the system in an off-grid mode and (2) maximization of the total profit obtained from using renewable electricity and selling surplus solar electricity to the grid, considering the feed-in-tariff (FiT) scheme in a grid-tied mode. As indicated by the model results, the proposed HRES can generate about 47.3 MWh of electricity in all scenarios, which is needed to meet the external load requirement in the selected study area. The levelized cost of energy (LCOE) of the system in scenarios 1 and 2 was estimated at 55.92 JPY/kWh and 56.47 JPY/kWh, respectively.

scholarly journals A Sizing Method for PV–Battery–Generator Systems for Off-Grid Applications Based on the LCOE

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1988
Author(s):  
Ioannis E. Kosmadakis ◽  
Costas Elmasides
Keyword(s):  
Renewable Energy ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Temporal Distribution ◽  
Electrical Energy ◽  
Optimal Number ◽  
Diesel Generator ◽  
Levelized Cost Of Electricity ◽  
Sufficient Power ◽  
Battery Energy

Electricity supply in nonelectrified areas can be covered by distributed renewable energy systems. The main disadvantage of these systems is the intermittent and often unpredictable nature of renewable energy sources. Moreover, the temporal distribution of renewable energy may not match that of energy demand. Systems that combine photovoltaic modules with electrical energy storage (EES) can eliminate the above disadvantages. However, the adoption of such solutions is often financially prohibitive. Therefore, all parameters that lead to a functionally reliable and self-sufficient power generation system should be carefully considered during the design phase of such systems. This study proposes a sizing method for off-grid electrification systems consisting of photovoltaics (PV), batteries, and a diesel generator set. The method is based on the optimal number of PV panels and battery energy capacity whilst minimizing the levelized cost of electricity (LCOE) for a period of 25 years. Validations against a synthesized load profile produced grid-independent systems backed by different accumulator technologies, with LCOEs ranging from 0.34 EUR/kWh to 0.46 EUR/kWh. The applied algorithm emphasizes a parameter of useful energy as a key output parameter for which the solar harvest is maximized in parallel with the minimization of the LCOE.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals Electric Mobility in Cities: The Case of Vienna

Energies ◽  
2021 ◽  
Vol 14 (1) ◽  
pp. 217
Author(s):  
Amela Ajanovic ◽  
Marina Siebenhofer ◽  
Reinhard Haas
Keyword(s):  
Electric Vehicles ◽  
Future Development ◽  
Urban Areas ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Road Transport ◽  
Electric Mobility ◽  
Policy Framework ◽  
The Future ◽  
Historical Developments

Environmental problems such as air pollution and greenhouse gas emissions are especially challenging in urban areas. Electric mobility in different forms may be a solution. While in recent years a major focus was put on private electric vehicles, e-mobility in public transport is already a very well-established and mature technology with a long history. The core objective of this paper is to analyze the economics of e-mobility in the Austrian capital of Vienna and the corresponding impact on the environment. In this paper, the historical developments, policy framework and scenarios for the future development of mobility in Vienna up to 2030 are presented. A major result shows that in an ambitious scenario for the deployment of battery electric vehicles, the total energy demand in road transport can be reduced by about 60% in 2030 compared to 2018. The major conclusion is that the policies, especially subsidies and emission-free zones will have the largest impact on the future development of private and public e-mobility in Vienna. Regarding the environmental performance, the most important is to ensure that a very high share of electricity used for electric mobility is generated from renewable energy sources.

scholarly journals Optimal Planning and Operation of a Residential Energy Community under Shared Electricity Incentives

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2045
Author(s):  
Pierpaolo Garavaso ◽  
Fabio Bignucolo ◽  
Jacopo Vivian ◽  
Giulia Alessio ◽  
Michele De Carli
Keyword(s):  
Renewable Energy ◽  
Power Distribution ◽  
Energy Demand ◽  
Renewable Energy Sources ◽  
Energy System ◽  
Distribution Networks ◽  
Building Envelope ◽  
Net Energy ◽  
Technical Equipment ◽  
Optimal Planning

Energy communities (ECs) are becoming increasingly common entities in power distribution networks. To promote local consumption of renewable energy sources, governments are supporting members of ECs with strong incentives on shared electricity. This policy encourages investments in the residential sector for building retrofit interventions and technical equipment renovations. In this paper, a general EC is modeled as an energy hub, which is deemed as a multi-energy system where different energy carriers are converted or stored to meet the building energy needs. Following the standardized matrix modeling approach, this paper introduces a novel methodology that aims at jointly identifying both optimal investments (planning) and optimal management strategies (operation) to supply the EC’s energy demand in the most convenient way under the current economic framework and policies. Optimal planning and operating results of five refurbishment cases for a real multi-family building are found and discussed, both in terms of overall cost and environmental impact. Simulation results verify that investing in building thermal efficiency leads to progressive electrification of end uses. It is demonstrated that the combination of improvements on building envelope thermal performances, photovoltaic (PV) generation, and heat pump results to be the most convenient refurbishment investment, allowing a 28% overall cost reduction compared to the benchmark scenario. Furthermore, incentives on shared electricity prove to stimulate higher renewable energy source (RES) penetration, reaching a significant reduction of emissions due to decreased net energy import.

scholarly journals Data Analytics for Profiling Low-Voltage Customers with Smart Meter Readings

2021 ◽  
Vol 11 (2) ◽  
pp. 500
Author(s):  
Fabrizio Pilo ◽  
Giuditta Pisano ◽  
Simona Ruggeri ◽  
Matteo Troncia
Keyword(s):  
Energy Demand ◽  
Data Analytics ◽  
Distribution Systems ◽  
Low Voltage ◽  
Renewable Energy Sources ◽  
A Priori ◽  
Energy Transition ◽  
Smart Meters ◽  
Large Databases ◽  
A New Technique

The energy transition for decarbonization requires consumers’ and producers’ active participation to give the power system the necessary flexibility to manage intermittency and non-programmability of renewable energy sources. The accurate knowledge of the energy demand of every single customer is crucial for accurately assessing their potential as flexibility providers. This topic gained terrific input from the widespread deployment of smart meters and the continuous development of data analytics and artificial intelligence. The paper proposes a new technique based on advanced data analytics to analyze the data registered by smart meters to associate to each customer a typical load profile (LP). Different LPs are assigned to low voltage (LV) customers belonging to nominal homogeneous category for overcoming the inaccuracy due to non-existent coincident peaks, arising by the common use of a unique LP per category. The proposed methodology, starting from two large databases, constituted by tens of thousands of customers of different categories, clusters their consumption profiles to define new representative LPs, without a priori preferring a specific clustering technique but using that one that provides better results. The paper also proposes a method for associating the proper LP to new or not monitored customers, considering only few features easily available for the distribution systems operator (DSO).

Improving Sustainability of Housing in Ghana through Energy Efficient Climate Control Strategies

2012 ◽  
Vol 608-609 ◽  
pp. 1698-1704
Author(s):  
Abdul Manan Dauda ◽  
Hui Gao
Keyword(s):  
Natural Ventilation ◽  
Energy Savings ◽  
Control Strategies ◽  
Internal Heat ◽  
Climate Control ◽  
Housing Design ◽  
Artificial Lighting ◽  
Testing Procedures ◽  
Mass Housing ◽  
Design Changes

This paper aims at explaining testing procedures used to evaluate the potential of natural ventilation and daylighting applications to passive design of housing in Ghana. The objectives of research were to reduce energy costs and increase the sustainability of housing. From the results of these experiments actual and potential designs are illustrated and discussed. Mass housing results in multi-storey buildings which require substantial artificial lighting and ventilation. Also, with the increasing usage of glass for windows and doors in Ghana, even the shaded depths of buildings require additional daylight usually resulting in more energy consumption. By supplementing the internal lighting levels with daylight, reducing the internal heat load by shading windows to direct radiation and the utilization of natural ventilation over air conditioning where possible, significant energy savings are could be achieved. The research proposes mass housing design changes such as: delivering daylight above the suspended ceiling into the depths of the building by horizontal light pipes and natural ventilation, utilizing stack effect and wind siphonage, etc.

Sign in / Sign up

Export Citation Format

Share Document