scholarly journals Study of Equilibria in Cadmium Bromide Complexes Solutions From the Aspect of Their Quantitative Determination

2015 ◽  
Vol 11 (1-2) ◽  
Author(s):  
Suzana Vujasinović ◽  
Jasna Vindakijević ◽  
Slavica Sladojević

The study of equilibria established in cadmium bromide complexes solutions was performed voltammetrically, by applying the linear sweep technique on the hanging mercury drop electrode, HMDE. In the studied systems the initial cadmium-ion concentration was equal, and the concentration of ligands, bromide ion, was gradually increased along with maintaining the pH-value and ion force of the solution at the constant values. The resulting shifts of the voltammogram peak reduction potential, which come as a result of the change in the electroactive species concentration due to the increase of the ligand concentration, were treated by the method of  DeFord-Hume. In this manner four cadmium bromide complexes species were detected and their stability constants were determined. All obtained stability constants matched the literature data in a satisfactory manner.

2012 ◽  
Vol 239-240 ◽  
pp. 1573-1576
Author(s):  
Zhu Qing Gao ◽  
Xiao Dong Cai ◽  
Kai Cheng Ling

At different temperatures, the protonation constants of tannic acid and the complex apparent stability constants between tannic acid and VO2+ were determined by using pH potentimetric method. The results showed that the protonation constants and the complex apparent stability constants slightly decreased with the raising temperature. In accordance with the pH value in the tannin extract technology, the conditional stability constants of the complex were calculated on the basis of the acid effect of tannic acid and the hydrolysis effect of VO2+. It was found that pH greatly affected the stability constants of the complex , so pH must be strictly controlled in the tannin extract technology.


2003 ◽  
Vol 21 (3) ◽  
pp. 245-260 ◽  
Author(s):  
Fawzi Banat ◽  
Sameer Al-Asheh ◽  
Leema Al-Makhadmeh

Activated carbons derived from date pits obtained as a surplus agricultural solid waste and natural date pits were used for the adsorption of cadmium ions from water. The effect of contact time, pH, temperature, cadmium ion concentration, sorbent dose, salinity, as well as the activation temperature on the removal of cadmium ions by date pits was studied. The maximum adsorption capacity of date pits for cadmium ions was obtained using the linear Langmuir isotherm model and used as a basis for comparative purposes. Three sorption kinetic models were used for explaining the probable mechanisms of cadmium ion uptake. The kinetic data for the adsorption process obeyed a second-order rate equation.


2013 ◽  
Vol 773 ◽  
pp. 283-288
Author(s):  
Xing Zou ◽  
Xiang Quan Chen ◽  
Hai Chao Xie ◽  
Xiao Dan Qiu

The manganese sulfate solution leached from low-grade pyrolusite with pyrite and H2SO4 contains heavy metal ions of high concentration, influencing the quality of the final products of manganese compounds and causing manganese ions not to be electrolyzed. The present study was focused on the separation of Co, Ni and Zn ions from the leached solution with BaS. By controlling the pH value at 5.0-6.5, temperature at 50-60°C, reaction time at 15 min and mixing velocity at 78 rpm, the heavy metal ions could be separated effectively. Under the above optimized conditions, the ion concentration of Co, Ni, and Zn in the solution was reduced to 0.06 mg.L-1, 0.27mg.L-1 and 0.01mg.L-1, and the separation efficiency was 99.72%, 99.18% and 99.9% respectively. The obtained pure solution meets the demands of manganese electrowinning.


2015 ◽  
Vol 6 (2) ◽  
pp. 310-324 ◽  
Author(s):  
Selvaraj Dinesh Kirupha ◽  
Selvaraj Kalaivani ◽  
Thangaraj Vidhyadevi ◽  
Periyaraman Premkumar ◽  
Palanithamy Baskaralingam ◽  
...  

A novel poly [2,5-(1,3,4-thiadiazole)-benzalimine] abbreviated as TDPI adsorbent was synthesized using simple polycondensation technique. The synthetic route involves the preparation of 2,5-diamino-1,3,4-thiadiazole from 2,5-dithiourea and subsequent condensation with terephthalaldehyde. The resin was chemically characterized using Fourier transform infrared (FT-IR), 1H-NMR, and 13C-NMR spectroscopic analysis. Surface morphology and thermal stability were analyzed using scanning electron microscopy (SEM) and thermo-gravimetric analysis (TGA). The effect of the pH value of solution, contact time, adsorbent dose, and initial metal ion concentration were investigated by batch equilibrium adsorption experiments. Kinetic studies show that the adsorption of metal ions onto the resin proceeds according to the pseudo-second-order model and the equilibrium data were best interpreted by the Redlich–Peterson isotherm. The experimental values of the adsorption capacities of Pb2+, Cu2+, Ni2+, and Cd2+ on to TDPI could reach up to 437.2, 491.6, 493.7, and 481.9 mg.g−1 respectively. The exothermic nature of the process, the affinity of the adsorbent towards the metal ions and the feasibility of the process are explained in the thermodynamic parameters. The resin stability and re-usability studies suggest that the resin is chemically stable (0.3 N HCl and H2SO4) and could be regenerated without any serious decline in performance.


1976 ◽  
Vol 59 (1) ◽  
pp. 53-55
Author(s):  
James E Graf ◽  
Troy E Vaughn ◽  
William H Kipp

Abstract The use of the bromide ion selective electrode for the determination of bromide ion in wine has been found to be rapid and reliable. The method has been used for still wines and carbonated wines and is applicable to all wines regardless of their country of origin. The method consists of treating a 50 ml aliquot of wine with 2 ml each of 3.75M H3PO4, saturated KNO3, and 1M CuSO4. After 10 min the electrodes are immersed in the samples and a millivolt reading is obtained. One hundred μl 500 ppm bromide ion standard is added and the millivolt reading is taken. Bromide ion concentration in the wine = (CΔ × 1)/((antilog ΔE/S) − 1) where CΔ = 1, ΔE = the change in potential expressed in millivolts, and S = the electrode slope.


2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Nacer Ferrah ◽  
Omar Abderrahim ◽  
Mohamed Amine Didi ◽  
Didier Villemin

A new chelating polymeric sorbent has been developed using polystyrene resin grafted with phosphonic acid. After characterization by FTIR and elementary analysis, the new resin has been investigated in liquid-solid extraction of cadmium(II). The results indicated that phosphonic resin could adsorb Cd(II) ion effectively from aqueous solution. The adsorption was strongly dependent on the pH of the medium and the optimum pH value level for better sorption was between 3.2 and 5.2. The influence of other analytical parameters including contact time, amount of resin, metal ion concentration, and the presence of some electrolytes was investigated. The maximum uptake capacity of Cd(II) ions was 37,9 mg·g−1grafted resin at ambient temperature, at an initial pH value of 5.0. The overall adsorption process was best described by pseudo second-order kinetic. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. Furthermore, more than 92% of Cd(II) could be eluted by using 1.0 mol·L−1HCl in one cycle.


2012 ◽  
Vol 518-523 ◽  
pp. 3204-3207 ◽  
Author(s):  
Hui Tian ◽  
Ya Na Liu

The methyl violet dye as the main research subjects. The concentration of H2O2, ferrous ion concentration, pH value and the type of dyes and so on be research the influence on the rate. The result shown: the greater dose of H2O2, the greater removal of methyl violet dye. when the dose of H2O2reach to a certain amount, keep increase the dose , but the increase was not obvious. In a certain concentration range, when the higher concentration of ferrous ions, the higher degradation rate of methyl viologen.When more than the certain concentration, the degradation rate began to decline. The removal efficiency is better when the ratio of ferrous ions and H2O2is 1:10..A large removal rate is controlled in the temperature of 20 to 60 as well as the pH is from 3 to 5. After changing the type of dye,beside the Alizarin Red,the removal of Methylene blue, Rhodamine, methyl violet are all high.


1925 ◽  
Vol 7 (3) ◽  
pp. 389-413 ◽  
Author(s):  
Stuart Mudd

It is shown that when a mammalian serous membrane bathed in dilute buffer is traversed by an electric current, liquid is caused to stream through the membrane toward the cathode when the pH value of the buffer is on the alkaline side of a certain critical hydrogen ion concentration. Streaming is toward the anode on the acid side of the reversal point. Simple means for studying this electroendosmosis quantitatively are described. The mean values of the reversal points in all cases studied with the present buffers lie between pH = 4.3 and 5.3. The membranes studied have been the mesentery of the living and dead animal, and the parietal pericardium and pleura, post mortem. The membranes of dogs, cats, rabbits, and two human pericardia have been studied. All these membranes are essentially sheets of connective tissue, bearing blood vessels, lymphatics, and nerves, and in some instances fat cells, and lined on each surface by a single layer of pavement mesothelial cells. Intercellular fibers form the major bulk of the lean membranes. These are predominantly collagenous except in the pleural region used, in which elastin fibers are present in large proportion. By using buffers alternately more acid or more alkaline than the reversal point, the direction of liquid flow across any given membrane site could be reversed an indefinite number of times. The time interval required is only that taken by the requisite manipulation in changing buffers and making the runs. The mean values of the reversal points for the several membranes when bathed in hypotonic, unbalanced buffer and in isotonic, physiologically balanced buffers showed only small and inconstant differences. The fat and lean pericardia similarly showed small difference in the positions of the mean reversal points. The apparent reversal points for the mesenteries of living animals proved to be lower than those for the mesenteries post mortem. This low value in the animals with functioning circulation is interpreted as essentially due to admixture with the buffers of buffer salts from the blood. Clear differences between the reversal points of the membranes in the first compared with later hours or days post mortem were not detected, with the possible exception of a small shift toward the acid range of the fat pericardium reversal points estimated several days post mortem. The reversal points with cat membranes were somewhat lower (more acid) than those of the dog. The approximate mean reversal points found with the citrate-phosphate buffers used were as follows: For mesenteries of living animals pH = 4.4; for mesenteries, post mortem, pH = 4.8; for cat pleuræ, post mortem, pH = 4.3; for dog pleuræ, post mortem, pH = 5.0; for lean and fat pericardia, post mortem, pH = 5.1. The mean reversal point of the two human pericardia was about pH = 5.0. Reversal points determined with buffers containing only monovalent anions are somewhat higher (less acid), as will be shown later. The bearing of these data on the question of the chemical composition of the surfaces of the fat cells of the serous membranes is discussed. Briefly, it is believed that proteins are probably present in important amount in these cell surfaces.


2012 ◽  
Vol 446-449 ◽  
pp. 2800-2808
Author(s):  
Guo Jing Yang ◽  
Shuang Shuang Chen ◽  
Wei Hong Wu ◽  
Jian Zhou

The process optimization and characteristics of electrode-biofilm for the treatment of copper pickling wastewater in the self-designed reactor were experimentally investigated. Carbon electrodes were installed in the reactor as the anode and cathode and denitrifying microorganisms were fixed on the surface of the cathode. The results showed that neutralization, copper ion removal, denitrification proceeded simultaneously and no secondary pollution existed. The removal rate of total nitrogen and copper ion in the effluent water reached 98% and 97% at 30mg/L of copper ion concentration and 100mg/L of nitrate nitrogen when the conditions were controlled at temperature 35°C, current density 0.1mA/cm2, hydraulic retention time 11h and C/N ration 1.07. The pH value of the treated water was increased almost to neutral. In addition, copper ion solution of certain concentration and purity could be made by exchanging the polarity of anode and cathode to recycle copper in this research.


Sign in / Sign up

Export Citation Format

Share Document