La/Al-doped ZrO2 Thin-Film Resistive Random Access Memory Devices by Sol-gel Method for Transparent Solid-State Circuit Systems

2014 ◽  
Author(s):  
Y.R. Wang ◽  
B. Chen ◽  
B. Gao ◽  
L.F. Liu ◽  
J.F. Kang
2022 ◽  
Vol 1048 ◽  
pp. 198-202
Author(s):  
K.M. Shafi ◽  
K. Muhammed Shibu ◽  
N.K. Sulfikarali ◽  
K.P. Biju

In this work, we fabricated ZrO2 based resistive random access memory by sol-gel spin coating technique and investigated its structural, optical and resistive switching properties. The X-ray diffraction pattern revealed that 400 °C annealed ZrO2 thin film has tetragonal structure. The optical band gap value of ZrO2 thin film obtained was 5.51 eV. The resistive switching behaviour of W/ZrO2/ITO capacitor like structure was studied. It was found that no initial electroforming process required for the device. The fabricated devices show a self-compliance bipolar resistive switching behaviour and have high on off ratio (>102). Our result suggests that solution processed ZrO2 has great potential to develop transparent and flexible resistive random access memory devices.


2020 ◽  
Vol 12 (2) ◽  
pp. 02008-1-02008-4
Author(s):  
Pramod J. Patil ◽  
◽  
Namita A. Ahir ◽  
Suhas Yadav ◽  
Chetan C. Revadekar ◽  
...  

2012 ◽  
Vol 21 (6) ◽  
pp. 065201 ◽  
Author(s):  
Jian-Wei Zhao ◽  
Feng-Juan Liu ◽  
Hai-Qin Huang ◽  
Zuo-Fu Hu ◽  
Xi-Qing Zhang

2014 ◽  
Vol 602-603 ◽  
pp. 1056-1059 ◽  
Author(s):  
Min Chang Kuan ◽  
Fann Wei Yang ◽  
Chien Min Cheng ◽  
Kai Huang Chen ◽  
Jian Tz Lee

Up to now, the various non-volatile memory devices such as, ferroelectric random access memory (FeRAM), magnetron random access memory (MRAM), and resistance random access memory (RRAM) were widely discussed and investigated. For these nonvolatile memory devices, the resistance random access memory (RRAM) devices will play an important role because of its non-destructive readout, low operation voltage, high operation speed, long retention time, and simple structure. The resistance random access memory (RRAM) devices were only consisting of one resistor and one corresponding transistor. The subject of this work was to study the characteristics of manganese oxide (MnO) thin films deposited on transparent conductive thin film using the rf magnetron sputtering method. The optimal sputtering conditions of as-deposited manganese oxide (MnO) thin films were the rf power of 80 W, chamber pressure of 20 mTorr, substrate temperature of 580°C, and an oxygen concentration of 40%. The basic mechanisms for the bistable resistance switching were observed. In which, the non-volatile memory and switching properties of the manganese oxide (MnO) thin film structures were reported and the relationship between the memory windows and electrical properties was investigated.


Sign in / Sign up

Export Citation Format

Share Document