scholarly journals Preparation, Characterization and Dissolution Behaviour of Freeze Dried Complexes of Curcumin-Gamma Cyclodextrin

2021 ◽  
pp. 17-26
Author(s):  
M. J. Ansari ◽  
K. Kohli ◽  
J. Ali
Keyword(s):  
Inclusion Complexes ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Stoichiometric Ratio ◽  
Scanning Calorimetry ◽  
First Order ◽  
Rate Of Dissolution ◽  
Freeze Dried ◽  
Gamma Cyclodextrin

The aim of the current research was to develop and characterize curcumin-gamma cyclodextrin inclusion complexes in order to enhance solubility and rate of dissolution of poorly soluble curcumin. Based on the stoichiometric ratio of 1:1, the inclusion complexes of curcumin with γ-cyclodextrin were prepared by freeze drying method. The prepared dried and solidified inclusion complexes were characterized with the help of infrared spectroscopy, differential scanning calorimetry, and X-ray diffractometry. The comparative evaluation of solubility and rate of dissolution were investigated and compared with pure curcumin. Dissolution study demonstrated only 10% release from pure curcumin at 1 hour as opposed of approximately 72% release form freeze dried curcumin complexes. The freeze dried complexes exhibited almost complete release after 5 hours while only 34% release was observed from the pure curcumin during the same time period. Therefore, the freeze dried complex provided approximately 3 to 7-fold enhancement in the dissolution and release of curcumin over a period of 6 hours of dissolution testing.  The kinetics of the in vitro release behaviors of the curcumin and curcumin complexes were investigated by applying various models such as zero order, first order, Higuchi and Peppas models. The release of the curcumin was observed to follow the first order release kinetics, since the correlation coefficient (R2) for the first order was the highest in comparison to other kinetic models.

scholarly journals Formulation and development of metformin-loaded microspheres using Khaya senegalensis (Meliaceae) gum as co-polymer

2020 ◽  
Vol 6 (1) ◽  
Author(s):  
Chukwuebuka H. Ozoude ◽  
Chukwuemeka P. Azubuike ◽  
Modupe O. Ologunagba ◽  
Sejoro S. Tonuewa ◽  
Cecilia I. Igwilo
Keyword(s):  
Controlled Release ◽  
Sodium Alginate ◽  
Release Kinetics ◽  
Drug Carrier ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Metformin Hydrochloride ◽  
Scanning Calorimetry ◽  
Khaya Senegalensis

Abstract Background Khaya gum is a bark exudate from Khaya senegalensis (Maliaecae) that has drug carrier potential. This study aimed to formulate and comparatively evaluate metformin-loaded microspheres using blends of khaya gum and sodium alginate. Khaya gum was extracted and subjected to preformulation studies using established protocols while three formulations (FA; FB and FC) of metformin (1% w/v)-loaded microspheres were prepared by the ionic gelation method using 5% zinc chloride solution as the cross-linker. The formulations contained 2% w/v blends of khaya gum and sodium alginate in the ratios of 2:3, 9:11, and 1:1, respectively. The microspheres were evaluated by scanning electron microscopy, Fourier transform-infrared spectroscopy, differential scanning calorimetry, entrapment efficiency, swelling index, and in vitro release studies. Results Yield of 28.48%, pH of 4.00 ± 0.05, moisture content (14.59% ± 0.50), and fair flow properties (Carr’s index 23.68 ± 1.91 and Hausner’s ratio 1.31 ± 0.03) of the khaya gum were obtained. FTIR analyses showed no significant interaction between pure metformin hydrochloride with excipients. Discrete spherical microspheres with sizes ranging from 1200 to 1420 μm were obtained. Drug entrapment efficiency of the microspheres ranged from 65.6 to 81.5%. The release of the drug from microspheres was sustained for the 9 h of the study as the cumulative release was 62% (FA), 73% (FB), and 80% (FC). The release kinetics followed Korsmeyer-Peppas model with super case-II transport mechanism. Conclusion Blends of Khaya senegalensis gum and sodium alginate are promising polymer combination for the preparation of controlled-release formulations. The blend of the khaya gum and sodium alginate produced microspheres with controlled release properties. However, the formulation containing 2:3 ratio of khaya gum and sodium alginate respectively produced microspheres with comparable controlled release profiles to the commercial brand metformin tablet.

Formulation and Evaluation of Fast Dissolving Gliclazide Tablets by Complexation with Hydroxypropyl-β-Cyclodextrin

2014 ◽  
Vol 7 (1) ◽  
pp. 2399-2405
Author(s):  
Adel M Aly ◽  
Khaled M. Al-Akhali ◽  
Hesham Alrefaey ◽  
Mahmoud A. Shaker
Keyword(s):  
Dissolution Rate ◽  
Spray Drying ◽  
Inclusion Complexes ◽  
In Vitro Release ◽  
Hypoglycemic Effect ◽  
Scanning Calorimetry ◽  
Molar Ratios ◽  
Market Product

Gliclazide (GZ) is practically insoluble in water and its bioavailability is limited by dissolution rate. The aim of the present study was to enhance the dissolution rate and bioavailability of GZ by complexation with hydroxypropyl (HP)-β-cyclodextrin (CD) applying three different methods; physical mixing, kneading technique and spray drying technique.  Also, to evaluate the dissolution rate and the hypoglycemic effect of the prepared complexes, in comparison with the GZ market product (Glizide tablets) in Saudi market. The produced complexes were characterized and evaluated using Differential Scanning Calorimetry (DSC), X-ray Diffractometry (XRD), Scanning Electron Microscope (SEM) and the in vitro release studies. All the methods of preparation of complexes were found to be effective in improving the solubility of gliclazide in comparison with the commercial product (Glizide tablets). The formation of inclusion complexes was evident in these formulations as shown by DSC and XRD studies. The inclusion complexes prepared by spray drying method in 1:1 molar ratios were the most effective method for improving the solubility of GZ. The in-vivo hypoglycemic effect of the complexed GZ-HP-β-CD prepared by spray drying significantly improved the biological performance and therapeutic efficacy of the drug compared to Glizide market product.  

scholarly journals DESIGN, OPTIMIZATION AND IN VITRO EVALUATION OF ANTIFUNGAL ACTIVITY OF NANOSTRUCTURED LIPID CARRIERS OF TOLNAFTATE

2019 ◽  
pp. 109-115
Author(s):  
AHMED GARDOUH ◽  
Samar H. Faheim ◽  
Samar M. Solyman
Keyword(s):  
Zeta Potential ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Entrapment Efficiency ◽  
Homogenization Method ◽  
Nanostructured Lipid Carriers ◽  
Scanning Calorimetry ◽  
Release Study ◽  
Vitro Release

Objective: The main purpose of this work was to prepare tolnaftate (TOL) loaded nanostructured lipid carriers (NLCs), Evaluate its characteristics and in vitro release study. Methods: Tolnaftate loaded Nanostructured lipid carriers were prepared by the high shear homogenization method using different liquid lipids types (DERMAROL DCO® and DERMAROL CCT®) and concentrations, different concentration ratios of tween80® to span20® and different homogenization speeds. All the formulated nanoparticles were subjected to particle size (PS), zeta potential (ZP), polydispersity index (PI), drug entrapment efficiency (EE), Differential Scanning Calorimetry (DSC), Transmission Electron microscopy (TEM), release kinetics and in vitro release study was determined. Results: The results revealed that NLC dispersions had spherical shapes with an average size between 154.966±1.85 nm and 1078.4±103.02 nm. High entrapment efficiency was obtained with negatively charged zeta potential with PDI value ranging from 0.291±0.02 to 0.985±0.02. The release profiles of all formulations were characterized by a sustained release behavior over 24 h and the release rates increased as the amount of surfactant decreased. The release rate of TOL is expressed following the theoretical model by Higuchi. Conclusion: From this study, It can be concluded that NLCs are a good carrier for tolnaftate delivery

Synthesis, Characterization, and Properties of Copolyanhydrides Based on 2-Octylsuccinic Acid and Sebacic Acid

2008 ◽  
Vol 61 (10) ◽  
pp. 762 ◽  
Author(s):  
Yousef M. Hamdan ◽  
Shitao Fu ◽  
Xiangmei Jiang ◽  
Yinhua Cheng ◽  
Kaixun Huang ◽  
...  
Keyword(s):  
Release Kinetics ◽  
Sebacic Acid ◽  
Gel Permeation Chromatography ◽  
Gravimetric Analysis ◽  
Thermal Gravimetric ◽  
Scanning Calorimetry ◽  
First Order ◽  
Melt Polycondensation ◽  
Model Drug

2-Octylsuccinic acid and its copolyanhydrides with sebacic acid have been synthesized by melt polycondensation, and were characterized by Fourier transform infrared spectroscopy, 1H NMR, gel permeation chromatography, differential scanning calorimetry, and thermal gravimetric analysis. In vitro studies showed that all copolymers are degradable in phosphate buffer at 37°C. The release profiles of the hydrophilic model drug ciprofloxacin hydrochloride follow first-order release kinetics.

scholarly journals Characterization of Ketoprofen/Methyl-β-Cyclodextrin Complexes Prepared Using Supercritical Carbon Dioxide

2013 ◽  
Vol 2013 ◽  
pp. 1-8 ◽  
Author(s):  
Mauro Banchero ◽  
Silvia Ronchetti ◽  
Luigi Manna
Keyword(s):  
Dissolution Rate ◽  
Water Solubility ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Pharmaceutical Formulations ◽  
Drug Dissolution ◽  
Scanning Calorimetry ◽  
Supercritical Treatment ◽  
The Fourier Transform

Complexes of methyl-β-cyclodextrin and ketoprofen, a crystalline anti-inflammatory drug with poor water solubility, have been prepared for the first time in the presence of supercritical CO2at 40°C and 20 MPa. The supercritical treatment allows these pharmaceutical formulations to be prepared without the use of any auxiliary agents or organic solvents. The treated samples were characterized through differential scanning calorimetry, X-ray diffractometry, and the Fourier transform infrared spectroscopy to exclude the presence of crystalline drug and check the formation of the complexes. The increase of the drug dissolution rate was investigated performing in vitro release tests in aqueous solutions. The results showed that the supercritical treatment can be an efficient method to obtain inclusion complexes with enhanced release kinetics. The operating methods of the release tests, that is, the “tablet method” or the “dispersed amount method,” affected both the dissolution rate and its dependence on the drug amount in the samples. On the contrary, the variation of the pH of the dissolution medium did not show any effect on the release rate of the supercritical complexes.

scholarly journals Enhancement of the dissolution profile of the diuretic hydrochlorothiazide by elaboration of microspheres

2018 ◽  
Vol 83 (11) ◽  
pp. 1243-1259
Author(s):  
Oum Larbi ◽  
Haouaria Merine ◽  
Youssef Ramli ◽  
Fawzia Toumi ◽  
Kaddour Guemra ◽  
...  
Keyword(s):  
Ftir Spectroscopy ◽  
Release Kinetics ◽  
Drug Loading ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Xrd Analysis ◽  
In Vitro Dissolution ◽  
Dissolution Profile ◽  
Scanning Calorimetry

Hydrochlorothiazide (HCTZ), which was developed and introduced in the late 1950s, is still one of the most frequently employed drugs in antihypertensive treatments. Its poor aqueous solubility is one of the reasons for its limited bioavailability after oral administration. The present paper provides details of the preparation of HCTZ-loaded microspheres by the solvent evaporation technique. A total of seven formulations were prepared using ethyl cellulose, poly(?-caprolactone) (PCL), ?-cyclodextrin (?-CD) and synthesized poly-(methyl methacrylate) (PMMA) of different molecular weights in different drug-to-carrier ratios in order to investigate their effect on the encapsulation efficiency and drug release kinetics. The prepared formulations were characterized by Fourier transform-infrared (FTIR) spectroscopy, powder X-ray diffractometry, differential scanning calorimetry, yield, drug loading, optical microscopy, surface morphology by scanning electron microscopy (SEM), and in vitro release studies in simulated gastrointestinal tract fluid. The loading efficiency was found in the range from 18?0.34 to 39?0.95 %. The microspheres were spherical, and the mean Sauter diameter (d32) of the obtained microparticles ranged from 26?0.16 to 107?0.58 ?m. The presence of the drug and polymer carriers in the microparticles was confirmed by FTIR spectroscopy and XRD analysis. In vitro dissolution studies showed that the release rate was largely affected by the characteristics of the microparticles, namely the particle size and the nature of the matrix. The release data are best fitted to the Higuchi model with high correlation coefficients (r?).

scholarly journals Transferrin-Conjugated Docetaxel–PLGA Nanoparticles for Tumor Targeting: Influence on MCF-7 Cell Cycle

Polymers ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1905 ◽  
Author(s):  
Jose ◽  
A. ◽  
Sebastian ◽  
H. ◽  
A. ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Plga Nanoparticles ◽  
Cell Uptake ◽  
Scanning Calorimetry ◽  
Cytotoxicity Studies ◽  
Anti Cancer ◽  
Mcf 7

Targeted drug delivery systems are commonly used to improve the therapeutic index of anti-cancer drugs by increasing their selectivity and reducing systemic distribution and toxicity. Ligand-conjugated nanoparticles (NPs) can be effectively applied for active chemotherapeutic targeting to overexpressed receptors of tumor cells. In this study, transferrin (Tf) was successfully conjugated with poly-l-lactic-co-glycolic acid (PLGA) using ethylene diamine confirmed by NMR, for the loading of docetaxel trihydrate (DCT) into PLGA nanoparticles (NPs). The DCT-loaded Tf-conjugated PLGA NPs were produced by an emulsion-solvent evaporation technique, and a 32 full factorial design was used to optimize the nanoparticle formulations. The DCT-loaded Tf-conjugated PLGA NPs were characterized by FTIR spectroscopy, differential scanning calorimetry, powder X-ray diffraction (PXRD), TEM, particle size, and zeta potential analysis. In vitro release kinetics confirmed that release of DCT from the designed formulations followed a zero-order kinetics and a diffusion controlled non-Fickian release profile. The DCT-loaded Tf-conjugated PLGA NPs were evaluated in vitro in MCF-7 cells for bioactivity assessment. Cytotoxicity studies confirmed that the Tf-conjugated PLGA NPs were more active than the non-conjugated counterparts. Cell uptake studies re-confirmed the ligand-mediated active targeting of the formulated NPs. From the cell cycle analysis, the anti-cancer activity of DCT-loaded Tf-conjugated PLGA NPs was shown to occur by arresting the G2/M phase.

scholarly journals Evaluation of Transdermal Formulations of Metoclopramide Prepared Using Arachis Oil and Liquid Paraffin as Permeation Enhancers

2020 ◽  
Author(s):  
Sylvester O. Eraga ◽  
Matthew I. Arhewoh ◽  
Ogochukwu A. Meko
Keyword(s):  
Drug Release ◽  
Ex Vivo ◽  
Release Kinetics ◽  
Liquid Paraffin ◽  
In Vitro Release ◽  
Methyl Cellulose ◽  
Tween 80 ◽  
Patient Acceptance ◽  
Scanning Calorimetry

Background: The study aimed to evaluate the effect of arachis oil and liquid paraffin on metoclopramide release from transdermal films. Objectives: Batches of metoclopramide films were prepared with hydroxypropyl methyl cellulose (HPMC), arachis oil or liquid paraffin and Tween 80 as plasticizer. The films were evaluated for their physiochemical properties, in vitro and ex vivo drug release and drug release kinetics. Drug-excipient interactions were investigated using Differential Scanning Calorimetry (DSC) and Fourier Transform Infrared (FTIR) spectroscopy. Methods: The transdermal films had a weight range of 0.22-0.24 g, folding endurance of 300-306, percentage moisture content and uptake of 2%-10% and 19%-110%, respectively and drug content of 98%-104%. There was similar condition in vitro release profile for the films but their ex vivo profiles exhibited variable drug release with the P3 (30% arachis oil) giving the highest drug (almost 100%) release.  Results: The release kinetics of metoclopramide followed the first order and Korsemeyer-Peppas models more closely as seen in their correlation coefficients (R2) of 0.9832 and 0.9560, respectively. Drug-excipient compatibility studies showed no interactions between excipients and metoclopramide. Conclusion: The formulated transdermal films showed controlled drug release over a period of 12 h. Arachis oil and liquid paraffin showed similar permeation enhancing ability. These enhanced permeation properties of the films could be helpful in the development of alternative route for metoclopramide administration in the management of emesis with improved patient acceptance.

Fenofibrate Solid Dispersion for Improving Oral Bioavailability: Preparation, and Characterization and in vivo Evaluation

2020 ◽  
Vol 13 (5) ◽  
pp. 5102-5109
Author(s):  
Venu Madhav K ◽  
Somnath De ◽  
Chandra Shekar Bonagiri ◽  
Sridhar Babu Gummadi
Keyword(s):  
Oral Bioavailability ◽  
Oral Delivery ◽  
Solid Dispersions ◽  
In Vitro Release ◽  
Aqueous Solubility ◽  
Water Soluble ◽  
Scanning Calorimetry ◽  
In Vivo Evaluation

Fenofibrate (FN) is used in the treatment of hypercholesterolemia. It shows poor dissolution and poor oral bioavailability after oral administration due to high liphophilicity and low aqueous solubility. Hence, solid dispersions (SDs) of FN (FN-SDs) were develop that might enhance the dissolution and subsequently oral bioavailability. FN-SDs were prepared by solvent casting method using different carriers (PEG 4000, PEG 6000, β cyclodextrin and HP β cyclodextrin) in different proportions (0.25%, 0.5%, 0.75% and 1% w/v). FN-SDs were evaluated solubility, assay and in vitro release studies for the optimization of SD formulation. Differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and scanning electron microscopy (SEM) analysis was performed for crystalline and morphology analysis, respectively. Further, optimized FN-SD formulation evaluated for pharmacokinetic performance in Wistar rats, in vivo in comparison with FN suspension.  From the results, FN-SD3 and FN-SD6 have showed 102.9 ±1.3% and 105.5±3.1% drug release, respectively in 2 h. DSC and PXRD studies revealed that conversion of crystalline to amorphous nature of FN from FT-SD formulation. SEM studies revealed the change in the orientation of FN when incorporated in SDs. The oral bioavailability FN-SD3 and FN-SD6 formulations exhibited 2.5-folds and 3.1-folds improvement when compared to FN suspension as control. Overall, SD of FN could be considered as an alternative dosage form for the enhancement of oral delivery of poorly water-soluble FN.

Design, Synthesis and Studies on Novel Polymeric Prodrugs of Erlotinib for Colon Drug Delivery

2020 ◽  
Vol 20 ◽  
Author(s):  
Sahil Kumar ◽  
Bandna Sharma ◽  
Tilak R. Bhardwaj ◽  
Rajesh K. Singh
Keyword(s):  
Drug Delivery ◽  
Colon Cancer ◽  
Drug Release ◽  
Anticancer Agents ◽  
Release Kinetics ◽  
In Vitro Release ◽  
Specific Treatment ◽  
Drug Conjugates ◽  
Polymer Drug Conjugates

Aims: In the present study, polymer-drug conjugates were synthesized based on azo-bond cleavage drug delivery approach for targeting erlotinib as anticancer drug specifically to the colon for the proficient treatment of colon cancer. Background: Colon cancer (CC) is the third commonly detected tumor worldwide and it make up about 10 % of all cases of cancers. Most of the chemotherapeutic drugs available for treating colon cancer are not only toxic to cancerous cells but also to the normal healthy cells. Among the various approaches to get rid of the adverse effects of anticancer agents, prodrugs are one of the most imperative approaches. Objective: The objective of the study is to chemically modify the erlotinib drug through azo-bond linkage and suitable spacer which will be finally linked to polymeric backbone to give desired polymer linked prodrug. The azo reductase enzyme present in colon is supposed to cleave the azo-bond specifically and augment the drug release at the colon. Methods: The synthesized conjugates were characterized by IR and 1H-NMR spectroscopy. The cleavage of aromatic azobond resulted in a potential colon-specific liberation of drug from conjugate studied in rat fecal contents. In vitro release profiles of polyphosphazene-linked conjugates of erlotinib have been studied at pH 1.2, pH 6.8 and pH 7.4. The stability study was designed to exhibit that free drug was released proficiently and unmodified from polyphosphazene-erlotinib conjugates having aromatic azo-bond in artificial colon conditions. Results: The synthesized conjugates were demonstrated to be stable in simulated upper gastro-intestinal tract conditions. The drug release kinetics shows that all the polymer-drug conjugates of erlotinib follow zero-order release kinetics which indicates that the drug release from the polymeric backbone is independent of its concentration. Kinetic study of conjugates with slope (n) shows the anomalous type of release with an exponent (n) > 0.89 indicating a super case II type of release. Conclusion: These studies indicate that polyphosphazene linked drug conjugates of erlotinib could be the promising candidates for the site-specific treatment of colon cancer with least detrimental side-effects.

Sign in / Sign up

Export Citation Format

Share Document