avalanche diodes
Recently Published Documents


TOTAL DOCUMENTS

532
(FIVE YEARS 69)

H-INDEX

31
(FIVE YEARS 3)

2022 ◽  
Vol 17 (01) ◽  
pp. C01022
Author(s):  
T. Croci ◽  
A. Morozzi ◽  
F. Moscatelli ◽  
V. Sola ◽  
G. Borghi ◽  
...  

Abstract In this work, the results of Technology-CAD (TCAD) device-level simulations of non-irradiated and irradiated Low-Gain Avalanche Diode (LGAD) detectors and their validation against experimental data will be presented. Thanks to the intrinsic multiplication of the charge within these silicon sensors, it is possible to improve the signal to noise ratio thus limiting its drastic reduction with fluence, as it happens instead for standard silicon detectors. Therefore, special attention has been devoted to the choice of the avalanche model, which allows the simulation findings to better fit with experimental data. Moreover, a radiation damage model (called “New University of Perugia TCAD model”) has been fully implemented within the simulation environment, to have a predictive insight into the electrical behavior and the charge collection properties of the LGAD detectors, up to the highest particle fluences expected in the future High Energy Physics (HEP) experiments. This numerical model allows to consider the comprehensive bulk and surface damage effects induced by radiation on silicon sensors. By coupling the “New University of Perugia TCAD model” with an analytical model that describes the mechanism of acceptor removal in the multiplication layer, it has been possible to reproduce experimental data with high accuracy, demonstrating the reliability of the simulation framework.


Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 122
Author(s):  
Franco Bandi ◽  
Victor Ilisie ◽  
Ion Vornicu ◽  
Ricardo Carmona-Galán ◽  
José M. Benlloch ◽  
...  

Silicon photomultipliers (SiPMs) are arrays of single-photon avalanche diodes (SPADs) connected in parallel. Analog silicon photomultipliers are built in custom technologies optimized for detection efficiency. Digital silicon photomultipliers are built in CMOS technology. Although CMOS SPADs are less sensitive, they can incorporate additional functionality at the sensor plane, which is required in some applications for an accurate detection in terms of energy, timestamp, and spatial location. This additional circuitry comprises active quenching and recharge circuits, pulse combining and counting logic, and a time-to-digital converter. This, together with the disconnection of defective SPADs, results in a reduction of the light-sensitive area. In addition, the pile-up of pulses, in space and in time, translates into additional efficiency losses that are inherent to digital SiPMs. The design of digital SiPMs must include some sort of optimization of the pixel architecture in order to maximize sensitivity. In this paper, we identify the most relevant variables that determine the influence of SPAD yield, fill factor loss, and spatial and temporal pile-up in the photon detection efficiency. An optimum of 8% is found for different pixel sizes. The potential benefits of molecular imaging of these optimized and small-sized pixels with independent timestamping capabilities are also analyzed.


2021 ◽  
Author(s):  
Michael Hofbauer ◽  
Kerstin Schneider-Hornstein ◽  
Horst Zimmermann

Author(s):  
Mathieu Sicre ◽  
Megan Agnew ◽  
Christel Buj ◽  
Jean Coignus ◽  
Dominique Golanski ◽  
...  

2021 ◽  
Vol 60 (06) ◽  
Author(s):  
Seyed Saman Kohneh Poushi ◽  
Hiwa Mahmoudi ◽  
Michael Hofbauer ◽  
Bernhard Steindl ◽  
Kerstin Schneider-Hornstein ◽  
...  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
F. Di Capua ◽  
M. Campajola ◽  
D. Fiore ◽  
L. Gasparini ◽  
E. Sarnelli ◽  
...  

AbstractThis paper focuses on the understanding of the Random Telegraph Signal (RTS) in Single-Photon Avalanche Diodes (SPAD). We studied the RTS of two different SPAD layouts, designed and implemented in a 150-nm CMOS process, after proton irradiation. The two structures are characterized by different junction types: the first structure is constituted by a P+/Nwell junction, while the second is formed by a Pwell/Niso junction. RTS occurrence has been measured in about one thousand SPAD pixels and the differences addressed in two layouts are motivated and discussed. Hypotheses on the RTS origin are drawn by analyzing the RTS time constants and the RTS occurrence evolution as a function of the annealing temperature.


Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2887
Author(s):  
Andre Buchner ◽  
Stefan Hadrath ◽  
Roman Burkard ◽  
Florian M. Kolb ◽  
Jennifer Ruskowski ◽  
...  

Performance of systems for optical detection depends on the choice of the right detector for the right application. Designers of optical systems for ranging applications can choose from a variety of highly sensitive photodetectors, of which the two most prominent ones are linear mode avalanche photodiodes (LM-APDs or APDs) and Geiger-mode APDs or single-photon avalanche diodes (SPADs). Both achieve high responsivity and fast optical response, while maintaining low noise characteristics, which is crucial in low-light applications such as fluorescence lifetime measurements or high intensity measurements, for example, Light Detection and Ranging (LiDAR), in outdoor scenarios. The signal-to-noise ratio (SNR) of detectors is used as an analytical, scenario-dependent tool to simplify detector choice for optical system designers depending on technologically achievable photodiode parameters. In this article, analytical methods are used to obtain a universal SNR comparison of APDs and SPADs for the first time. Different signal and ambient light power levels are evaluated. The low noise characteristic of a typical SPAD leads to high SNR in scenarios with overall low signal power, but high background illumination can saturate the detector. LM-APDs achieve higher SNR in systems with higher signal and noise power but compromise signals with low power because of the noise characteristic of the diode and its readout electronics. Besides pure differentiation of signal levels without time information, ranging performance in LiDAR with time-dependent signals is discussed for a reference distance of 100 m. This evaluation should support LiDAR system designers in choosing a matching photodiode and allows for further discussion regarding future technological development and multi pixel detector designs in a common framework.


Sign in / Sign up

Export Citation Format

Share Document