Dynamics of small molecules within the F127 PEO-PPO-PEO triblock copolymer gel and sol phases studied at the molecular scale

The dynamics of naphthalene derivatives with different hydrophobicities bound to F127 polyethyleneoxide-polypropyleneoxide-polyethyleneoxide (PEO-PPO-PEO) micelles in the gel and sol phases were studied using a quenching methodology for the triplet excited states of the naphthalenes. Studies with triplet excited states probe a larger reaction volume than the volumes accessible when using fluorescent singlet excited states. The use of triplet excited states enables the determination of the dynamics between different compartments of a supramolecular system, which in the case of F127 micelles are the micellar core, the micellar corona and the aqueous phase. This report includes laser flash photolysis studies for the four naphthalene derivatives in the F127 gel and sol phases. The triplet excited states were quenched using the nitrite anion as the quenchers. The association and dissociation rate constants of the naphthalenes from the micelles and the quenching rate constants for the naphthalenes bound to the micelles were determines from the curved quenching plot (observed decay rate constant vs. nitrite concentration).

Photodynamic Effect of 5,10,15,20-Tetrakis[4-(3-N,N-dimethylaminopropoxy)phenyl]chlorin towards the Human Pathogen Candida albicans under Different Culture Conditions

Photocytotoxic activity sensitized by 5,10,15,20-tetrakis[4-(3-N,N-dimethylaminopropoxy)phenyl]chlorin (TAPC) was investigated in Candida albicans under different culture conditions. Planktonic cells incubated with 2.5 μM TAPC were eradicated after 5 min irradiation with white light. Studies in the presence of reactive oxygen species scavengers indicated the involvement of mainly a type II mechanism. Furthermore, cell growth of C. albicans was suppressed in the presence of 5 μM TAPC. A decrease in pseudohyphae survival of 5 log was found after 30 min irradiation. However, the photokilling of this virulence factor reached a 1.5 log reduction in human serum. The uptake of TAPC by pseudohyphae decreased in serum due to the interaction of TAPC with albumin. The binding constant of the TAPC-albumin complex was ~104 M−1, while the bimolecular quenching rate constant was ~1012 s−1 M−1, indicating that this process occurred through a static process. Thus, the photoinactivation of C. albicans was considerably decreased in the presence of albumin. A reduction of 2 log in cell survival was observed using 4.5% albumin and 30 min irradiation. The results allow optimizing the best conditions to inactivate C. albicans under different culture conditions.

A novel method for the synthesis of MOF-199 for Sensing and Photocatalytic Applications

Multifunctional Cu (II)-based Metal Organic Framework (MOF) [Cu3(BTC)2] has been synthesized by a facile electrochemical method. Crystallographic and morphological characterizations of synthesized MOF have been done using Powder X-ray Diffractometer and Scanning Electron Microscope (SEM), respectively, whereas Fourier Transform Infrared Spectroscopy (FT-IR), Energy Dispersive X-ray Spectroscopy (EDS), UV-Vis Absorption Spectroscopy and Energy Resolved Luminescence Spectroscopic studies have been used for the detailed qualitative, quantitative as well as optical analyses. Sharp PXRD peaks indicate the formation of highly crystalline MOF with face centered cubic (fcc) structure. Flakes (average length = 0.71µm and width = 0.10 µm) and rods (average aspect ratio = ((0.1:8.3) µm) like morphologies have been observed in SEM micrographs. The presence of C, O and Cu has been confirmed by EDS analysis. Photocatalytic activity potential of the synthesized MOF has been tested using methylene blue dye (MB) as a test contaminant in aqueous media under sunlight irradiation. Selective and sensitive fluorescent sensing of different Nitroaromatic compounds (NACs) like 4-Nitroaniline (4-NA), 2-Nitroaniline (2-NA), 3-Nitroaniline (3-NA), 4-Nitrotoulene (4-NT), 2,4-Dinitrotoulene (2,4-DNT), 1,3-Dinitrobenzene (1,3-DNB), 2,6-Dinitrotoulene (2,6-DNT) has been done by exploring the photoluminescent behaviour of chemically stable Cu3(BTC)2. Synthesized MOF is extremely sensitive towards 4-NA, which is having PL quenching efficiency of 82.61% with highest quenching rate till reported. Indeed, a large quenching coefficient KSV = 34.02 x 10− 7 M− 1 and correlation coefficient R2 = 0.9962 in KSV plot have been elucidated with limit of detection (LOD) = 0.7544 ppb. The possible ways of luminescence quenching are successfully explained by the combination of Photoinduced Electron Transfer (PET) and Resonance Energy Transfer (RET) mechanisms. Additionally, the Density Functional Theory (DFT) calculations have been employed to support the experimental results. Cu3(BTC)2 fully demonstrates the power of a multi component MOF, which provides a feasible pathway for the design of novel material towards fast responding luminescence sensing and photocatalytic degradation of pollutants.

Effect of Different Parameters of Quenching and Tempering Process on SS410 Grade Martensitic Stainless Steel

This paper reports the influence of different chemical composition, austenitizing temperature, quenching rate and tempering temperature on the mechanical properties and microstructure of martensitic stainless-steel SS 410 grade. For calculating general material properties such as hardness and yield strength of SS 410 grade, JMatpro software is used. Analysis of SS 410 grade has been done for austenitizing temperature ranging from 9250C to 10100C followed by tempering whose temperature ranges from 2050C to 6050C.The proper practices of quenching and tempering should be performed ensuring the suitable microstructure of the steels. To get fully Martensite, quenching has to be done at least at 0.40C/s or more than that. The results also shows that composition of carbon has great effect on transition temperature Ms and Mf of martensitic stainless steel 410 grade as compared to chromium. Air cooling or oil quenching this type steels from austenite phase results in microstructure consists of mainly hard and brittle martensite, small amount of retained austenite. Subsequent tempering process reduces hardness and increases ductility and toughness.

Spectroscopic Study on the Reaction of Singlet-Excited Nile Blue with Certain Antioxidants

The photoinduced interaction of nile blue (NB) with various antioxidant molecules was investigated by fluorescence quenching technique and lifetime measurements. The various substituted catecholic compounds are employed as quenchers to evaluate their antioxidant activity. The formations of ground state complex between NB and quencher molecules observed from the UV-Visible absorption spectroscopy. The bimolecular quenching rate constants (kq) values depend on presence of substituent and its electronic properties of quencher molecules. Fluorescence quenching experiments have been performed at three different temperatures to assess the thermodynamic parameters. Time resolved fluorescence measurements suggest that the fluorescence quenching of NB with antioxidant molecules undergoes static quenching mechanism. The bond dissociation enthalpy (BDE) values reveal the discharge of HTfrom the antioxidant molecules. The electronic properties play an important role in the antioxidant activity of quencher molecules. The mechanism of fluorescence quenching between NB and quencher molecules are analysed based on the fluorescence quenching experiments, cyclic voltammetry experiments and BDE calculations.

Precipitation during Quenching in 2A97 Aluminum Alloy and the Influences from Grain Structure

The quench-induced precipitation and subsequent aging response in 2A97 aluminum alloy was investigated based on the systematic microstructure characterization. Specifically, the influence on precipitation from grain structure was examined. The results indicated the evident influence from the cooling rate of the quenching process. Precipitation of T1 and δ′ phase can hardly occur in the specimen exposed to water quenching while become noticeable in the case of air cooling. The yield strength of 2A97-T6 alloy de-graded by 234 MPa along with a comparable elongation when water quenching was replaced by air cooling. Sub-grains exhibited a much higher sensitivity to the precipitation during quenching. The presence of dislocations in sub-grains promoted the quench-induced precipitation by acting as nucleation sites and enhancing the diffusion of the solute. A quenching rate of 3 °C/s is tolerable for recrystallized grains in 2A97 Al alloy but is inadequate for sub-grains to inhibit precipitation. The study fosters the feasibility of alleviating quench-induced precipitation through cultivating the recrystallization structure in highly alloyed Al–Cu–Li alloys.

Comparison of Antioxidant Properties of Dehydrolutein with Lutein and Zeaxanthin, and their Effects on Cultured Retinal Pigment Epithelial Cells

Dehydrolutein accumulates in substantial concentrations in the retina. The aim of this study was to compare antioxidant properties of dehydrolutein with other retinal carotenoids, lutein, and zeaxanthin, and their effects on ARPE-19 cells. The time-resolved detection of characteristic singlet oxygen phosphorescence was used to compare the singlet oxygen quenching rate constants of dehydrolutein, lutein, and zeaxanthin. The effects of these carotenoids on photosensitized oxidation were tested in liposomes, where photo-oxidation was induced by light in the presence of photosensitizers, and monitored by oximetry. To compare the uptake of dehydrolutein, lutein, and zeaxanthin, ARPE-19 cells were incubated with carotenoids for up to 19 days, and carotenoid contents were determined by spectrophotometry in cell extracts. To investigate the effects of carotenoids on photocytotoxicity, cells were exposed to light in the presence of rose bengal or all-trans-retinal. The results demonstrate that the rate constants for singlet oxygen quenching are 0.77 × 1010, 0.55 × 1010, and 1.23 × 1010 M−1s−1 for dehydrolutein, lutein, and zeaxanthin, respectively. Overall, dehydrolutein is similar to lutein or zeaxanthin in the protection of lipids against photosensitized oxidation. ARPE-19 cells accumulate substantial amounts of both zeaxanthin and lutein, but no detectable amounts of dehydrolutein. Cells pre-incubated with carotenoids are equally susceptible to photosensitized damage as cells without carotenoids. Carotenoids provided to cells together with the extracellular photosensitizers offer partial protection against photodamage. In conclusion, the antioxidant properties of dehydrolutein are similar to lutein and zeaxanthin. The mechanism responsible for its lack of accumulation in ARPE-19 cells deserves further investigation.