Maxillofacial Radiology 194

CBCT imaging and analysis was performed. Observe unilateral expansion by the distending soft tissue outline illustrated through 3D rendering (Figure 2). Sagittal oblique (Figure 3) and axial (Figure 4) slices depict a round heterogenous predominantly high-density lesion with an encompassing thin uniform less dense peripheral band. Irregular root resorption, displacement of the inferior alveolar nerve canal, buccal-lingual cortical expansion, thinning, and interruption was apparent. Irregular thickening at the inferior border and surrounding osteosclerosis were noted. A macroscopic view (Figure 5), photomicrograph (Figure 6), and conventional radiograph (Figure 7) of vertically sectioned surgical specimens of similar lesions. Note the intimate relationship with the tooth roots.

Non-Traumatic Tile Type B3 Pelvic Fracture Combined With Garden Type III Femoral Neck Fracture Caused By Hypocalcaemia-Induced Convulsions

BACKGROUND Non-traumatic fractures caused by convulsions are relatively rare and are often overlooked due to the lack of obvious evidence of injury. Non-traumatic fractures due to convulsions are diverse, but the concomitant of pelvic and femoral fractures has not been reported previously. CASE SUMMARY A 47-year-old woman with a no significant medical history, was taken to the nearest hospital after one episode of generalized tonic-clonic seizure that had occurred during sleep. After the postictal phase, the patient regained consciousness and experienced diffuse pain in the inguinal regions bilaterally with inability to stand or walk. The entire attack was witnessed by the family members who confirmed that there was not external trauma. Blood investigations revealed high creatinine and uric acid levels, along with a low calcium level. Conventional radiograph of the pelvis was performed to detect the cause of pain. The patient was noted to have a pelvic fracture and unilateral fracture of the neck of the femur. She was then transferred to our hospital for further management. The patient was diagnosed as having Tile type B3 pelvic fractures combined with a Garden type III femoral neck fracture on three-dimensional computed tomography (3D-CT). In view of her blood results, nephrology consultation was sought. The patient was identified as having a stage 5 chronic kidney disease (CKD), hypocalcemia, and hyperphosphatemia. However, neurological examination showed no abnormalities. No surgical intervention was adopted for her pelvic fractures. In addition to complete bed rest, closed reduction and percutaneous cannulated screw fixation was performed for the treatment of the right femoral neck fracture. An arteriovenous fistula was created for maintenance hemodialysis on the tenth postoperative day. At follow-up, twelve months follow-up after the operation, the patient had a normally gait and was satisfied with the outcome. CONCLUSION Patients who present with convulsive seizures especially patients with ion metabolism disorder should be examined thoroughly to ensure that no injury is missed.

Plywood Jig—A New Technique for Root Canal Curvature Measurement

The successful outcome of endodontic treatment is dependent on complete cleaning, shaping as well as three dimensional obturation of the root canal system. A conventional radiograph is a two-dimensional replication of a three-dimensional object and does not provide any conclusive evidence for canal curvatures. An accurate knowledge of the tooth anatomy and curvature is essential to avoid procedural errors. 100 freshly extracted human teeth were used in this study. Digital images were obtained using the plywood JIG and Schneider’s technique. These images were analyzed using the VixWin Pro digital image analyzing software (Gendex system). Statistical analysis was done using paired t test. The canal curvature average values measured using Jig method and Schneider method for mandibular teeth are 28.23° (±9.96) and 22.07° (±9.46) respectively. The smallest/largest curvature angles measured using Jig method and Schneider technique are 12/52° and 8/44° respectively. Canal curvature average values measured using Jig method and Schneider method for maxillary teeth were 23.40° (±11.36) and 19.23° (±11.94) respectively. The smallest/largest average curvature angles measured using Jig method, Schneider technique were 9/70° and 5/72° respectively. The values of the canal curvature angle obtained during routine radiographs in clinics have lower curvature angle and higher radius values as compared to the values obtained by this innovative JIG technique. Therefore, a clinician should always keep in mind the difference while measuring the curvature angle on radiographs during root canal treatment.

Comparison of Working Length Determination in Mandibular Single-Rooted Teeth

OBJECTIVES: The objective of this study was to compare working length calculated with conventional radiographs and an electronic apex locator (IPEX II) during the root canal treatment of mandibular anterior teeth. METHODOLOGY: A cross-sectional study was done in the Department of Operative Dentistry, Sardar Begum Dental Hospital, Peshawar during February and March 2018. A consecutive sampling technique was used for sampling. Only 30 patients fulfilled the inclusion criteria of our study. Detailed medical and dental history was taken. Only patient fulfilling inclusion criteria were enrolled in the study. Data were analyzed using SPSS version 20. RESULTS: The mean age for patients was 45.33±5.16. 33% out of 30 patients (10) were male and 20 were females. The mean working length calculated from radiographs was 22.25±1.29 (min 20.09-max 24.10). The mean working length calculated by the electronic apex locator (IPEX II) was 22.17±1.28 (min 20.00-max 24.07). The mean difference between working length calculated by radiograph and electronic apex locator was -0.084mm, which means the working length determined by radiographs and by electronic apex locator has no difference in mandibular anterior teeth with single canals. CONCLUSION: Both the methods can be used effectively in endodontics for single-rooted mandibular teeth, but if both are used in combinations can lead to an improvement in the working length accuracy, which may significantly reduce the number of radiographs exposure, and increase the success and comfort for endodontic patients. KEYWORDS: Working Length, Apex Locator, Conventional Radiograph

Arthritis

Imaging plays an important role in the diagnosis and management of joint disease. However, to accurately diagnose the underlying cause of a patient’s arthritis, consideration must be given to the clinical information available as well as to the imaging features of the disease. The pattern of joint involvement in each case is particularly important, with consideration of the number of joints involved, whether or not the joints are affected symmetrically on both sides of the body, and which specific joints are affected. In cases of peripheral arthritis involving the small joints of the hands and feet, the distribution of joint disease detected on the radiograph is often as important in making the correct diagnosis as the radiographic features of the disease.While cross-sectional imaging modalities have an important role to play, the conventional radiograph remains fundamental to the diagnosis of joint disease and is commonly the first imaging investigation undertaken.

Comparison of radiograph panoramic quality between conventional and indirect digital methods on mixed teeth period

Introduction: Panoramic radiograph is an image used by the dentist to maintain diagnosis in dentistry, for example, to evaluate teeth condition in mixed dentition period. There are two panoramic radiography techniques, which are conventional and digital (direct and indirect) method. This study was aimed to analyse the differences of panoramic radiograph image quality between the conventional and digital indirect method on mixed dentition radiograph. Methods: Thirty samples of conventional and indirect digital panoramic radiograph were randomly taken from the database according to inclusion criteria. The image quality of conventional radiograph was manually assessed by using illuminator box, while indirect digital radiographs was assessed directly using DBS Win 5.7.0 software (Durr Dental, Germany). The radiographs were divided into six zones: teeth area, nasal and sinus, mandible, TMJ, ramus-spine, and hyoid bone. The image quality assessment was performed in each area based on three criteria: anatomical coverage, density and contrast, and anatomical structure. Results: The Cronbach's Alpha Intra-Class Correlation (ICC) inter and intraobserver agreement test of conventional and digital indirect methods on the aspect of anatomical, density and contrast coverage, and anatomic structure showed an excellent agreement. The independent sample t-test result showed significant difference (p < 0.05) between the conventional and indirect digital method in density and contrast as well as anatomical structure aspects, but not significantly different (p > 0.05) in the anatomical coverage aspect. Conclusion: Indirect digital panoramic radiograph shows better image quality as compared to conventional radiograph, especially in the anatomical structure aspect, density and contrast. There is no difference in the anatomical coverage aspect between conventional and indirect digital panoramic radiograph.

Portable Chest Radiography Through Glass During COVID-19 Pandemic—Initial Experience in a Tertiary Care Center

Background: Portable chest radiograph for COVID-19 positive patients and persons under investigation can be acquired through glass doors or walls of isolation rooms to limit exposure to the pathogen and conserve resources. Purpose: To report our initial experience with acquiring portable chest radiographs through glass doors of isolation rooms. Methods: Only 1 of 2 radiology technologist team members donned personal protective equipment and stayed inside the isolation room, while the second technologist and the radiography unit remained outside during the procedure. First hundred radiographs acquired through glass at the emergency department of our institute formed the “through glass radiograph” group. Hundred consecutive portable chest radiographs performed in a conventional manner formed the “conventional radiograph” group for comparison. Imaging database and feedback from operations leader were used to identify occurrences of a failed procedure. Suggestion of repeating the study and comments related to quality of the study were recorded from the reports of the staff radiologist. Results: There was no instance of failed acquisition, nondiagnostic examination, or suggestion of repetition in both groups. No significant difference in the number of reports with quality related remarks ( P > .05) was found between the 2 groups. Radiography through glass doors was associated with increased suboptimal positioning related remarks in radiology reports ( P < .05). No significant association was identified among other comments about image quality. Conclusion: Our initial clinical experience suggests that the acquisition of portable chest radiographs through the glass doors of isolation rooms is technically feasible and results in diagnostic quality studies.

Diagnostic utility of whole spine and thoracic spine MRI corner inflammatory lesions in axial spondyloarthritis

Background: The presence of ⩾3 corner inflammatory lesions has been proposed as the definition of a positive spinal magnetic resonance imaging (MRI) for axial spondyloarthritis (axSpA), but subsequent studies showed inconclusive findings. Our objective was to evaluate whether locations of corner inflammatory lesions (CILs) would affect the diagnostic utility of MRI in axSpA. Method: Two groups were consecutively recruited from eight rheumatology centers in Hong Kong. The ‘axSpA’ group included 369 participants with a known diagnosis of axSpA. The ‘non-specific back pain’ (NSBP) control group consisted of 117 participants. Clinical, biochemical, and radiological parameters were collected and all patients underwent MRI of the spine and sacroiliac joints. CILs were assessed based on their locations (cervical, thoracic or lumbar) to determine the optimal cutoff for diagnosis. Results: The cutoff of ⩾5 whole spine CILs (W-CILs) and ⩾3 thoracic spine CILs (T-CILs) had comparable specificity to MRI sacroiliitis. Of 85/369 axSpA patients without sacroiliitis on conventional radiograph or MRI, 7 had ⩾5 W-CILs and 11 had ⩾3 T-CILs. Incorporating the proposed cutoffs into Assessment of SpondyloArthritis international Society axSpA criteria, ⩾5 W-CILs and ⩾3 T-CILs had similar performance when added to the imaging criteria for sacroiliitis (sensitivity 0.79 versus 0.80, specificity 0.92 versus 0.91). Conclusion: Spinal MRI provided little incremental diagnostic value in unselected axSpA patients. However, in patients without sacroiliitis on MRI or radiographs, 8–13% might be diagnosed by spinal MRI. Thoracic and whole spine MRI had similar diagnostic performance using the proposed cutoff of ⩾5 W-CILs and ⩾3 T-CILs.