One-Step Synthesized PbSe Nanocrystal Inks Decorated 2D MoS2 Heterostructure for High Stability Photodetectors with Photoresponse Extend to Near-Infrared Region

Two-dimensional layered transition metal dichalcogenides (TMDs) have been widely employed as functional materials in promising electronics and optoelectronic devices due to their unique physical and outstanding electronic properties. However, 2D...

Additive Printing of Recyclable Anti-Counterfeiting Patterns with Sol−Gel Cellulose Nanocrystal Inks

The assembly of cellulose nanocrystals (CNCs) that produce attractive structural color shows great potential in anti-counterfeiting application, but their processability and recyclability remain unsatisfied due to the strong hydrogen bonds...

CsPbBr3 nanocrystal inks for printable light harvesting devices

NC inks optimization for thin film solar cells printing.

Fabrication of Cu2ZnSnS4 Thin Films from Ball-Milled Nanoparticle inks under Various Annealing Temperatures

Cu2ZnSnS4 (CZTS) has been recognized as a promising thin-film absorber material of chalcopyrite-related solar cells. A two-stage method for fabricating CZTS films using CZTS nanoparticles was developed. Nanocrystal inks fabricated by a ball-milling method was utilized to °C deposit CZTS precursors by spin-coating approach. The CZTS precursors were annealed in the sulfur atmosphere under different annealing temperatures ranging from 550 °C to 650 °C. Influences of annealing temperature on grain growth, composition, crystallinity, and photovoltaic properties of CZTS films were characterized. With the increase of annealing temperature, grain growth was enhanced, while the sulfur atomic ratio fist increased then decreased. The crystallinity of the films was significantly improved after the annealing, and the obvious peak of the secondary phase of ZnS, were observed from the X-ray diffraction results, when the annealing temperature increased to 625 °C. However, the secondary phase was not detected from the surface Raman spectrum. Through comparing the Raman spectrum of different areas of the CZTS film, secondary phases of ZnS and SnS were observed, indicating the decomposition of CZTS films, due to the high temperature. The highest conversion efficiency of 7.5% was obtained when the annealing temperature was 600 °C.

Room-temperature direct synthesis of semi-conductive PbS nanocrystal inks for optoelectronic applications

Lead sulphide (PbS) nanocrystals (NCs) are promising materials for low-cost, high-performance optoelectronic devices. So far, PbS NCs have to be first synthesized with long-alkyl chain organic surface ligands and then be ligand-exchanged with shorter ligands (two-steps) to enable charge transport. However, the initial synthesis of insulated PbS NCs show no necessity and the ligand-exchange process is tedious and extravagant. Herein, we have developed a direct one-step, scalable synthetic method for iodide capped PbS (PbS-I) NC inks. The estimated cost for PbS-I NC inks is decreased to less than 6 $·g−1, compared with 16 $·g−1 for conventional methods. Furthermore, based on these PbS-I NCs, photodetector devices show a high detectivity of 1.4 × 1011Jones and solar cells show an air-stable power conversion efficiency (PCE) up to 10%. This scalable and low-cost direct preparation of high-quality PbS-I NC inks may pave a path for the future commercialization of NC based optoelectronics.

Building Solar Cells from Nanocrystal Inks

The use of solution-processed photovoltaics is a low cost, low material-consuming way to harvest abundant solar energy. Organic semiconductors based on perovskite or colloidal quantum dot photovoltaics have been well developed in recent years; however, stability is still an important issue for these photovoltaic devices. By combining solution processing, chemical treatment, and sintering technology, compact and efficient CdTe nanocrystal (NC) solar cells can be fabricated with high stability by optimizing the architecture of devices. Here, we review the progress on solution-processed CdTe NC-based photovoltaics. We focus particularly on NC materials and the design of devices that provide a good p–n junction quality, a graded bandgap for extending the spectrum response, and interface engineering to decrease carrier recombination. We summarize the progress in this field and give some insight into device processing, including element doping, new hole transport material application, and the design of new devices.

Fabrication of Cu2ZnSnS4 (CZTS) Nanoparticle Inks for Growth of CZTS Films for Solar Cells

Cu2ZnSnS4 (CZTS) is a promising candidate material for photovoltaic applications; hence, ecofriendly methods are required to fabricate CZTS films. In this work, we fabricated CZTS nanocrystal inks by a wet ball milling method, with the use of only nontoxic solvents, followed by filtration. We performed centrifugation to screen the as-milled CZTS and obtain nanocrystals. The distribution of CZTS nanoparticles during centrifugation was examined and nanocrystal inks were obtained after the final centrifugal treatment. The as-fabricated CZTS nanocrystal inks were used to deposit CZTS precursors with precisely controlled CZTS films by a spin-coating method followed by a rapid high pressure sulfur annealing method. Both the grain growth and crystallinity of the CZTS films were promoted and the composition was adjusted from S poor to S-rich by the annealing. XRD and Raman characterization showed no secondary phases in the annealed film, the absence of the detrimental phases. A solar cell efficiency of 6.2% (open circuit voltage: Voc = 633.3 mV, short circuit current: Jsc = 17.6 mA/cm2, and fill factor: FF = 55.8%) with an area of 0.2 cm2 was achieved based on the annealed CZTS film as the absorber layer.