Sand spikes pinpoint powerful palaeoseismicity

Sand spikes, pin-shaped, carbonate-cemented sandstone bodies of variable size widely interpreted as sedimentary concretions, have been enigmatic for nearly two centuries. We here present a high-energy mechanism for their formation. Two classic sand spike occurrences are found in the North Alpine Foreland Basin of Central Europe and at Mount Signal in southern California, USA. A distinct seismite horizon in Mid-Miocene Molasse sediments of southern Germany, genetically linked with the Ries impact event, exhibits dewatering structures and contains numerous sand spikes with tails systematically orientated away from the Ries crater. Sand spikes at Mount Signal, strikingly similar in shape to those found in Germany, have tails that point away from the nearby San Andreas Fault. Based on their structural and stratigraphic context, we interpret sand spikes as a new type of seismite and a promising tool to identify strong impact-induced or tectonic palaeo-earthquakes and their source regions in the geologic record.

A new middle Miocene lineage based on taxonomic revision of the large and rare cricetid-rodent genus Lartetomys

Large-sized cricetid rodents (Cricetodotontini) immigrated to Central Europe at the beginning of the Middle Miocene Climate Transition at ca. 15 My and are thus of great value for biostratigraphic and palaeoecologic purposes. An important fossil material belonging to a relatively small species of Mixocricetodon from the North Alpine Foreland Basin is described. It is a rare component in faunas of equivalent age, and the new material confirms the synonymy with the genus Lartetomys. The lineage L. mirabilis-L dehmi is documented in its chronostratigraphic framework, and the origin of the genus is discussed but remains uncertain.

Origins of hydrocarbons in the Geneva Basin: insights from oil, gas and source rock organic geochemistry

An extensive subsurface investigation evaluating the geothermal energy resources and underground thermal energy storage potential is being carried out in the southwestern part of the Swiss Molasse Basin around the Geneva Canton. Among this process, the evaluation of the petroleum source-rock type and potential is an important step to understand the petroleum system responsible of some oil and gas shows at surface and subsurface. This study provides a first appraisal of the risk to encounter possible undesired occurrence of hydrocarbons in the subsurface of the Geneva Basin. Upon the numerous source-rocks mentioned in the petroleum systems of the North Alpine Foreland Basin, the marine Type II Toarcian shales (Lias) and the terrigenous Type III Carboniferous coals and shales have been sampled from wells and characterized with Rock–Eval pyrolysis and GC–MS analysis. The Toarcian shales (known as the Posidonia shales) are showing a dominant Type II organic matter composition with a Type III component in the Jura region and the south of the basin. Its thermal maturity (~ 0.7 VRr%) shows that this source-rock currently generates hydrocarbons at depth. The Carboniferous coals and shales show a dominant Type III organic matter with slight marine to lacustrine component, in the wet gas window below the Geneva Basin. Two bitumen samples retrieved at surface (Roulave stream) and in a shallow borehole (Satigny) are heavily biodegraded. Relative abundance of regular steranes of the Roulave bitumen indicates an origin from a marine Type II organic matter. The source of the Satigny bitumen is supposedly the same even though a deeper source-rock, such as the lacustrine Permian shales expelling oil in the Jura region, can’t be discarded. The oil-prone Toarcian shales in the oil window are the most likely source of this bitumen. A gas pocket encountered in the shallow well of Satigny (Geneva Canton), was investigated for molecular and stable isotopic gas composition. The analyses indicated that the gas is made of a mixture of microbial (very low δ13C1) and thermogenic gas. The isotopic composition of ethane and propane suggests a thermogenic origin from an overmature Type II source-rock (> 1.6 VRr%) or from a terrigenous Type III source at a maturity of ~ 1.2 VRr%. The Carboniferous seems to be the only source-rock satisfying these constraints at depth. The petroleum potential of the marine Toarcian shales below the Geneva Basin remains nevertheless limited given the limited thickness of the source-rock across the area and does not pose a high risk for geothermal exploration. A higher risk is assigned to Permian and Carboniferous source-rocks at depth where they reached gas window maturity and generated large amount of gas below sealing Triassic evaporites. The large amount of faults and fractures cross-cutting the entire stratigraphic succession in the basin certainly serve as preferential migration pathways for gas, explaining its presence in shallow stratigraphic levels such as at Satigny.

The Evolution of the Paleo-Danube Deltas of the Lower Pannonian in the Vienna Basin

<p><strong>ABSTRACT</strong></p><p>The Vienna Basin is a rhombohedral SSW-NNE oriented Neogene extensional basin that formed along sinistral fault systems during Miocene lateral extrusion of the Eastern Alps. The basin fill consists of shallow marine and terrestrial sediments of early to late Miocene age reaching a thickness of 5500 m in the central part of the basin. The early Pannonian was a crucial time in the development of the Vienna Basin, as It coincided with the formation of Lake Pannon. The lake formed at 11.6 Ma when a significant regressive event isolated Lake Pannon from the Paratethys Sea, creating lacustrine depositional environments. At that time the delta of the Paleo-Danube started shedding its sediments into the central Vienna Basin. Based on an existing age model delta deposition commenced around 11.5 Ma and continued until 11.1 Ma. These subsurface deltaic deposits of the Hollabrunn-Mistelbach Formation represent the coeval fluvial deposits of the Paleo-Danube in the eastern plains of the North Alpine Foreland Basin. Therefore, the Palaeo-Danube represents an extraordinary case in where coeval fluvial and deltaic deposits of a Miocene river are continuously captured.</p><p>This study provides an interpretation of depositional architecture and depositional environments of this delta in the Austrian part of the central Vienna Basin based on the integration of 3D seismic surveys and well data. The mapped delta has an area of about 580 km<sup>2</sup>, and solely based on the geometry we classify the delta as a mostly river – dominated delta with significant influence of wave – reworking processes. For seven time slices paleogeographic maps are created, showing the interplay between the lacustrine environments of Lake Pannon, delta evolution and fluvial systems incising in the abandoned deltaplain. Onlaps between single deltalobes indicate a northward-movement of the main distributary channel. Approximate water-depth estimates are carried out with in-seismic measurements of the true vertical depth between the topset deposits of the delta and the base of the bottomset deposits. These data suggest a decrease of lake water depth from about 170 m during the initial phase of delta formation at 11.5 Ma to about 100 m during its terminal phase at 11.1 Ma. A major lake level rise of Lake Pannon around 11.1 Ma caused a flooding of the margins of the Vienna Basin, resulting in a back stepping of riverine deposits and termination of delta deposition in the study area.</p><p> </p>

Insights into the Thermal History of North-Eastern Switzerland—Apatite Fission Track Dating of Deep Drill Core Samples from the Swiss Jura Mountains and the Swiss Molasse Basin

This work presents new apatite fission track LA–ICP–MS (Laser Ablation Inductively Coupled Plasma Mass Spectrometry) data from Mid–Late Paleozoic rocks, which form the substratum of the Swiss Jura mountains (the Tabular Jura and the Jura fold-and-thrust belt) and the northern margin of the Swiss Molasse Basin. Samples were collected from cores of deep boreholes drilled in North Switzerland in the 1980s, which reached the crystalline basement. Our thermochronological data show that the region experienced a multi-cycle history of heating and cooling that we ascribe to burial and exhumation, respectively. Sedimentation in the Swiss Jura Mountains occurred continuously from Early Triassic to Early Cretaceous, leading to the deposition of maximum 2 km of sediments. Subsequently, less than 1 km of Lower Cretaceous and Upper Jurassic sediments were slowly eroded during the Late Cretaceous, plausibly as a consequence of the northward migration of the forebulge of the neo-forming North Alpine Foreland Basin. Following this event, the whole region remained relatively stable throughout the Paleogene. Our data show that the Tabular Jura region resumed exhumation at low rates in early–middle Miocene times (≈20–15 Ma), whereas exhumation in the Jura fold-and-thrust belt probably re-started later, in the late Miocene (≈10–5 Ma). Erosional exhumation likely continues to the present day. Despite sampling limitations, our thermochronological data record discrete periods of slow cooling (rates of about 1°C/My), which might preclude models of elevated cooling (due to intense erosion) in the Jura Mountains during the Miocene. The denudation (≈1 km) of the Tabular Jura region and the Jura fold-and-thrust belt (≈500 m) has provided sediments to the Swiss Molasse Basin since at least 20 Ma. The southward migration of deformation in the Jura mountains suggests that the molasse basin started to uplift and exhume only after 5 Ma, as suggested also by previous authors. The data presented here show that the deformation of the whole region is occurring in an out-of-sequence trend, which is more likely associated with the reactivation of thrust faults beneath the foreland basin. This deformation trend suggests that tectonics is the most determinant factor controlling denudation and exhumation of the region, whereas the recently proposed “climate-induced exhumation” mechanism might play a secondary role.

New discovery of two seismite horizons challenges the Ries–Steinheim double-impact theory

The Nördlinger Ries and the Steinheim Basin are widely perceived as a Middle Miocene impact crater doublet. We discovered two independent earthquake-produced seismite horizons in North Alpine Foreland Basin deposits potentially related to both impacts. The older seismite horizon, demonstrated to be associated with the Ries impact, is overlain by distal impact ejecta in situ, forming a unique continental seismite-ejecta couplet within a distance of up to 180 km from the crater. The younger seismite unit, also produced by a major palaeo-earthquake, comprises clastic dikes that cut through the Ries seismite-ejecta couplet. The clastic dikes may have formed in response to the Steinheim impact, some kyr after the Ries impact, in line with paleontologic results that indicate a time gap of about 0.5 Myr between the Ries and Steinheim events. This interpretation suggests the Ries and Steinheim impacts represent two temporally separate events in Southern Germany that, thus, witnessed a double disaster in the Middle Miocene. The magnitude–distance relationship of seismite formation during large earthquakes suggests the seismic and destructive potential of impact-induced earthquakes may be underestimated.

The Ries-Steinheim crater pair and two major earthquakes – New discoveries challenging the double-impact theory

The Nördlinger Ries and the Steinheim Basin are widely perceived as a Middle Miocene impact crater doublet. We discovered two independent earthquake-produced seismite horizons in North Alpine Foreland Basin deposits. The older seismite horizon,associated with the Ries impact is overlain by in situ-preserved distal impact ejecta, forming a unique continental seismite-ejecta couplet within a distance up to 180 km from the crater. The younger seismite unit, also triggered by a major palaeo-earthquake, comprises clastic dikes that cut through the Ries seismite-ejecta couplet. The clastic dikes were likely formed in response to the Steinheim impact, some kyr after the Ries impact, in line with paleontologic results. With the Ries and Steinheim impacts as two separate events, Southern Germany witnessed a double disaster in the Middle Miocene. The magnitude–distance relationship of seismite formation during large earthquakes suggests the seismic and destructive potential of impact-earthquakes may be significantly underestimated.

Predictability and controlling factors of overpressure in the North Alpine Foreland Basin, SE Germany: An interdisciplinary post-drill analysis of the Geretsried GEN-1 Deep Geothermal Well

The North Alpine Foreland Basin in SE Germany Germany’s most active deep geothermal province. However, in its southern and eastern part the basin is considerably overpressured, which is a significant challenge for drilling deep geothermal wells. In this study, we combine drilling data and velocity-based pore pressure analyses with 3D basin modelling to assess the predictability and controlling factors of overpressure in the sub-regional context (area of 80 km x 50 km) around the Geretsried GEN-1 well, a deep geothermal exploration well in the southern part of the North Alpine Foreland Basin in SE Germany. Drilling data and velocity-based pore pressure analyses indicate overpressure maxima in the Lower Oligocene (Rupelian and Schoeneck Formation) and up to mild overpressure in the Upper Oligocene (Chattian) and Upper Cretaceous, except for the hydrostatically pressured northwestern part of the study area. 3D basin modelling calibrated to four hydrocarbon wells surrounding the Geretsried GEN-1 well demonstrates the dominating role of disequilibrium compaction and low permeability units related to overpressure generation in the North Alpine Foreland Basin. However, secondary overpressure generation mechanisms are likely contributing. Also, the impact of Upper Cretaceous shales, which are eroded in the northwestern part of the study area, on overpressure maintenance is investigated. The calibrated basin model is tested against the drilling history and velocity (VSP) data-based pore pressure estimate of the Geretsried GEN-1 well and reveals that pore pressure prediction is generally possible using 3D basin modelling in the North Alpine Foreland Basin, but should be improved with more detailed analysis of lateral drainage systems and facies variations in the future. The results of the study are of relevance to future well planning and drilling as well as to geomechanical modelling of subsurface stresses and deep geothermal production in the North Alpine Foreland Basin.