Ba0.5Gd0.8La0.7Co2O6−δ Infiltrated BaZr0.8Y0.2O3-δ Composite Oxygen Electrodes for Protonic Ceramic Cells

In this study, a composite oxygen electrode is prepared by infiltrating a protonic-electronic conducting material, Ba0.5Gd0.8La0.7Co2O6−δ (BGLC) into a proton-conducting BaZr0.8Y0.2O3-δ (BZY20) backbone. The composite oxygen electrode is studied in a symmetrical cell configuration (BGLC-BZY20//BZY20//BGLC-BZY20). The electrode and cell performance are characterized via electrochemical impedance spectroscopy (EIS) with varying the operating conditions, including temperatures, oxygen, and steam partial pressures, with the purpose to identify and characterize the different electrochemical processes taking place in the oxygen electrode. Three electrode reaction processes are observed in the impedance spectra, which are tentatively assigned to i) diffusion of adsorbed oxygen/proton migration/hydroxyl formation, ii) oxygen reduction, and iii) charge transfer, going from the low- to high-frequency range. The BGLC-BZY20 electrode developed in this work shows a low polarization resistance of 0.22, 0.58, and 1.43 Ω cm2 per single electrode in 3 % humidified synthetic air (21% O2/79% N2) at 600, 550, and 500 °C, respectively. During long-term measurement, the cell shows no degradation in the first 350 hours but degrades afterward possibly due to insufficient material stability.

The Coupling between Voltage Profiles and Mechanical Deformations in LAGP Solid Electrolyte During Li Plating and Stripping

Chemo-mechanical degradation at the solid electrolyte – Li metal electrode interface is a bottleneck to improve cycle life of all-solid state Li-metal batteries. In this study, in operando digital image correlation (DIC) measurements provided temporal and spatial resolution of the chemo-mechanical deformations in LAGP solid electrolyte during the symmetrical cell cycling. The increase in strains in the interphase layer was correlated with the overpotential. The sudden increase in strains coincides with the mechanical fracture in LAGP detected by Micro CT. This work highlights the mechanical deformations in LAGP / Li interface and its coupling with the electrochemical behavior of the battery.

Bilaterally Asymmetric Helical Myofibrils in Ascidian Tadpole Larvae

The locomotor system is highly bilateral at the macroscopic level. Homochirality of biological molecules is fully compatible with the bilateral body. However, whether and how single-handed cells contribute to the bilateral locomotor system is obscure. Here, exploiting the small number of cells in the swimming tadpole larva of the ascidian Ciona, we analyzed morphology of the tail at cellular and subcellular scales. Quantitative phase-contrast X-ray tomographic microscopy revealed a high-density midline structure ventral to the notochord in the tail. Muscle cell nuclei on each side of the notochord were roughly bilaterally aligned. However, fluorescence microscopy detected left-right asymmetry of myofibril inclination relative to the longitudinal axis of the tail. Zernike phase-contrast X-ray tomographic microscopy revealed the presence of left-handed helices of myofibrils in muscle cells on both sides. Therefore, the locomotor system of ascidian larvae harbors symmetry-breaking left-handed helical cells, while maintaining bilaterally symmetrical cell alignment. These results suggest that bilateral animals can override cellular homochirality to generate the bilateral locomotor systems at the supracellular scale.

The Role of Grass MUTE Orthologs in GMC Progression and GC Morphogenesis

Stomata arose about 400 million years ago when plants left their aquatic environment. The last step of stomatal development is shared by all plant groups, and it implies a symmetrical cell division from the guard mother cell (GMC) to produce two guard cells (GCs) flanking a pore. In Arabidopsis, the basic helix-loop-helix transcription factor MUTE controls this step, upregulating cell-cycle regulators of the GMC division, and immediately afterward, repressors of theses regulators like FAMA and FOUR LIPS. Recently, three grass MUTE orthologs (BdMUTE from Brachypodium distachyon, OsMUTE from rice, and ZmMUTE from maize) have been identified and characterized. Mutations in these genes disrupt GMC fate, with bdmute also blocking GC morphogenesis. However, because these genes also regulate subsidiary cell recruitment, which takes place before GMC division, their functions regulating GMC division and GC morphogenesis could be an indirect consequence of that inducing the recruitment of subsidiary cells. Comprehensive data evaluation indicates that BdMUTE, and probably grass MUTE orthologs, directly controls GMC fate. Although grass MUTE proteins, whose genes are expressed in the GMC, move between cells, they regulate GMC fate from the cells where they are transcribed. Grass MUTE genes also regulate GC morphogenesis. Specifically, OsMUTE controls GC shape by inducing OsFAMA expression. In addition, while SCs are not required for GMC fate progression, they are for GC maturation.

Analysis of Performance Losses and Degradation Mechanism in Porous La2−X NiTiO6−δ:YSZ Electrodes

The electrode performance and degradation of 1:1 La2−xNiTiO6−δ:YSZ composites (x = 0, 0.2) has been investigated to evaluate their potential use as SOFC cathode materials by combining electrochemical impedance spectroscopy in symmetrical cell configuration under ambient air at 1173 K, XRD, electron microscopy and image processing studies. The polarisation resistance values increase notably, i.e., 0.035 and 0.058 Ωcm2 h−1 for x = 0 and 0.2 samples, respectively, after 300 h under these demanding conditions. Comparing the XRD patterns of the initial samples and after long-term exposure to high temperature, the perovskite structure is retained, although La2Zr2O7 and NiO appear as secondary phases accompanied by peak broadening, suggesting amorphization or reduction of the crystalline domains. SEM and TEM studies confirm the ex-solution of NiO with time in both phases and also prove these phases are prone to disorder. From these results, degradation in La2−xNiTiO6−δ:YSZ electrodes is due to the formation of La2Zr2O7 at the electrode–electrolyte interface and the ex-solution of NiO, which in turn results in the progressive structural amorphization of La18NiTiO6−δ phases. Both secondary phases constitute a non-conductive physical barrier that would hinder the ionic diffusion at the La2−xNiTiO6−δ:YSZ interface and oxygen access to surface active area.