An overview of strains in the Sevier thin-skinned thrust belt, Idaho and Wyoming, USA (latitude 42° N)

ABSTRACT Calcite twinning analysis across the central, unbuttressed portion of the Sevier thin-skin thrust belt, using Cambrian–Cretaceous limestones (n = 121) and synorogenic calcite veins (n = 31), records a complex strain history for the Sevier belt, Idaho and Wyoming, USA. Plots of fabric types (layer-parallel shortening, layer-normal shortening, etc.), shortening and extension axes for the Paris thrust (west, oldest, n = 11), Meade thrust (n = 46), Crawford thrust (n = 15), Absaroka thrust (n = 55), Darby thrust (n = 13), Lander Peak klippe (n = 5), eastern Prospect thrust (n = 6), and distal Cretaceous foreland (n = 3) reveal a W-E layer-parallel shortening strain only in the Prospect thrust and distal foreland. Calcite twinning strains in all western, internal thrust sheets are complex mixes of layer-parallel (LPS), layer-normal (LNS), and non-plane strains in limestones and synorogenic calcite veins. This complex strain fabric is best interpreted as the result of oblique convergence to the west and repeated eastward overthrusting by the Paris thrust.

Early detection of slight bruises in apples by cost-efficient near-infrared imaging

Near-infrared (NIR) spectroscopy has been widely reported for its useful applications in assessing internal fruit qualities. Motivated by apple consumption in the global market, this study aims to evaluate the possibility of applying NIR imaging to detect slight bruises in apple fruits. A simple optical setup was designed, and low-cost system components were used to promote the future development of practical and cost-efficient devices. To evaluate the effectiveness of the proposed approach, slight bruises were created by a mild impact with a comparably low impact energy of only 0.081 Joules. Experimental results showed that 100% of bruises in Jazz and Gala apples were accurately detected immediately after bruising and within 3 hours of storage. Thus, it is promising to develop customer devices to detect slight bruises for not only apple fruits but also other fruits with soft and thin skin at their early damage stages.

Infraorbital Hyaluronic Acid Filler: Common Aesthetic Side Effects with Treatment and Prevention Options

Background Infraorbital hollows can give a fatigued or aged appearance which can be treated by volumizing the segmented transition from the tear trough to the cheek with hyaluronic acid filler. Due to thin skin and the complex anatomy of the infraorbital area, both short- and long-term side effects from this treatment are very common. While some patients are clear surgical candidates vs. filler candidates, in real-world practice, many, if not most patients are on a continuum where either procedure is appropriate, and the treatment decision is individualized based on each person’s risk vs. benefit profile. Objectives Common aesthetic side effects from hyaluronic acid filler treatment in the infraorbital area will be reviewed, including their etiology, prevention, detection, and treatment. Method The authors’ experience from injecting the infraorbital areas of more than 800 patients in private clinical practice and observations from both short and long-term follow ups over eight years is leveraged to provide detailed guidance. Results Recommendations on injection techniques, patient selection, and patient education are presented along with algorithms for the prevention and management of bruising, short- and long-term swelling, bumps, and blue discoloration (which is usually secondary to swelling from the filler rather than just the filler alone placed or migrating too superficially). Conclusion For nearly all patients, complete dissolution of filler with hyaluronidase is not required to address the issue, and the guidelines provided here will assist clinicians in management of side effects to increase patient satisfaction with their treatment and aesthetic outcome.

Tomato Recognition for Harvesting Robots Considering Overlapping Leaves and Stems

In recent years, the declining and aging population of farmers has become a serious problem. Smart agriculture has been promoted to solve these problems. It is a type of agriculture that utilizes robotics, and information and communication technology to promote labor saving, precision, and realization of high-quality production. In this research, we focused on robots that can harvest tomatoes. Tomatoes are delicate vegetables with a thin skin and a relatively large yield. During automatic harvesting of tomatoes, to ensure the operation of the harvesting arm, an input by image processing is crucial to determine the color of the tomatoes at the time of harvesting. Research on robot image processing technology is indispensable for accurate operation of the arm. In an environment where tomatoes are harvested, obstacles such as leaves, stems, and unripe tomatoes should be taken into consideration. Therefore, in this research, we propose a method of image processing to provide an appropriate route for the arm to ensure easy harvesting, considering the surrounding obstacles.

Occipital condyle screw fixation after posterior decompression for Chiari malformation: Technical report and application

Background: Surgical techniques for stabilization of the occipital cervical junction have traditionally consisted of screw-based techniques applied in conjunction with occipital plating and rods connected to subaxial instrumentation in the form of pars, pedicle, or lateral mass screws. In patients with type 1 Chiari malformation (CM-1) and evidence of occipital cervical junction instability who have undergone posterior decompression, the occipital condyle (OC) represents a potential alternative cranial fixation point. To date, this technique has only been described in pediatric case reports and morphometric cadaver studies. Methods: Patients underwent posterior fossa decompression for treatment of CM. Subsequently, patients received occipital cervical stabilization using OC screws. Results: Patients were successfully treated with no post-operative morbidity. Patient 2 was found to have pseudoarthrosis and underwent revision. Both patients continue to do well at 1-year follow-up. Conclusion: Placement of the OC screw offers advantages over traditional plate-based occipital fixation in that bone removal for suboccipital decompression is not compromised by the need for hardware placement, screws are hidden underneath ample soft tissue in patients with thin skin which prevents erosion, and the OC consists of primarily cortical bone which provides for robust tricortical fixation. These cases demonstrate the novel application of the OC screw fixation technique to the treatment of occipital cervical junction instability in adult patients undergoing simultaneous posterior fossa decompression.

Analysis of Tilt Effect on Notch Depth Profiling Using Thin-Skin Regime of Driver-Pickup Eddy-Current Sensor

Electromagnetic eddy current sensors are commonly used to identify and quantify the surface notches of metals. However, the unintentional tilt of eddy current sensors affects results of size profiling, particularly for the depth profiling. In this paper, based on the eddy current thin-skin regime, a revised algorithm has been proposed for the analytical voltage or impedance of a tilted driver–pickup eddy current sensor scanning across a long ideal notch. Considering the resolution of the measurement, the bespoke driver–pickup, also termed as transmitter–receiver (T-R) sensor is designed with a small mean radius of 1 mm. In addition, the T-R sensor is connected to the electromagnetic instrument and controlled by a scanning stage with high spatial travel resolution, with a limit of 0.2 μm and selected as 0.25 mm. Experiments were conducted for imaging of an aluminium sheet with seven machined long notches of different depths using T-R sensor under different tilt angles. By fitting the measured voltage (both real and imaginary part) with proposed analytical algorithms, the depth profiling of notches is less affected by the tilt angle of sensors. From the results, the depth of notches can be retrieved within a deviation of 10% for tilt angles up to 60 degrees.

Analysis of Tilt Effect on Notch Depth Profiling Using Thin-Skin Regime of Driver-Pickup Eddy-Current Sensor

Electromagnetic eddy current sensors are commonly used to identify and quantify the surface notches of metals. However, the unintentional tilt of eddy current sensors affects results of size profiling, particularly for the depth profiling. In this paper, based on the eddy current thin-skin regime, a revised algorithm has been proposed for the analytical voltage or impedance of a tilted driver–pickup eddy current sensor scanning across a long ideal notch. Considering the resolution of the measurement, the bespoke driver–pickup, also termed as transmitter-receiver (T-R) sensor is designed with a small mean radius of 1 mm. Besides, the T-R sensor is connected to the electromagnetic instrument and controlled by a scanning stage with high spatial travel resolution , with a limit of 0.2 μm and selected as 0.25 mm. Experiments have been out on the voltage imaging of an aluminium sheet with 7 machined long notches of different depths using T-R sensor under different tilt angles. By fitting the measured voltage (both real and imaginary part) with proposed analytical algorithms, the depth profiling of notches is less affected by the tilt angle of sensors. From the results, the depth of notches can be retrieved within a deviation of 10 % for tilt angles up to 60 degrees.

الإسلام في إندونيسيا : بين الأصالة والإنحراف

Some people think that Islam in Indonesia is just a thin skin that covers religious teachings, beliefs and local traditions that exist in the Archipelago. Islam in Indonesia does not really touch the substance, the core of teaching, but merely a cloth from the teachings and traditions that already existed long before in the country. Therefore, Islam has no role in changing the situation of Indonesian society both from a social, economic and political perspective. This paper aims to counter those perception, and argues that Islam in Indonesia in terms of substance has no different from Islam in the Arab world, even though the Archipelago is not the place where the revelation descended, but the preachers who introduced Islam in the Archipelago were mostly preachers from the Arab world. Those preachers (da'i) with their intelligence, were able to spread Islam throughout the Archipelago in a relatively short time, without resistance from local religious adherents. This success could not be separated from the da'wah strategy of the da'i, namely by making local traditions as media for da'wah. So that the population of the Archipelago voluntarily embraced Islam. Substantially, there are no different between Islam in Indonesia and Islam in the Arab lands. The only distinctiveness lays on the da'wah strategy, namely by accomodating local traditions.

Use of the Spare-Part Strategy to Reconstruct the External Auditory Canal After Subtotal Auriculectomy for Basal Cell Carcinoma

After removal of an infiltrative BCC of the auditory meatus, a soft tissue defect of the temporal-mastoid area with bone exposure, needed reconstruction. Several options have been taken into account and a simple yet effective solution has been found following the spare-parts principle. The ear lobe, preserved during cancer removal, was split and used as a thin skin flap. Adequate coverage of the bone exposure and resurfacing of the external auditory canal was obtained with minimal donor site morbidity and a short surgery in a fragile patient with several comorbidities. The spare-parts strategy can provide successful solution to difficult reconstructive cases regardless of the anatomical area.