Early Detection of Failing Automotive Batteries Using Gas Sensors

Safety for automotive lithium-ion battery (LIB) applications is of crucial importance, especially for electric vehicle applications using batteries with high capacity and high energy density. In case of a defect inside or outside the cell, serious safety risks are possible including extensive heat generation, toxic and flammable gas generation, and consequently fire and explosion. New regulations (GB 38031-2020) require a warning for passengers at least five minutes before serious incidents. This regulation can hardly be fulfilled with state-of-the-art battery monitoring. In this study, gases produced during battery failure before and during a thermal runaway (TR) are investigated in detail and the use of different gas sensors as early detectors of battery incidents is tested and proposed. The response of several commercially available gas sensors is tested in four battery failure cases: unwanted electrolysis of voltage carrying parts, electrolyte vapor, first venting of the cell and the TR. The experiments show that battery failure detection with gas sensors is possible but depends highly on the failure case. The chosen gas sensor can detect H2 produced by unwanted electrolysis and electrolyte vapor and gases produced by degassing of state-of-the-art LIBs. The results may contribute significantly to failure detection and improvement of battery safety.

Integration of Single Co Atoms and Ru Nanoclusters Boosts the Cathodic Performance of Nitrogen-Doped 3D Graphene towards Lithium–Oxygen Batteries

The Li-O2 battery is recognized as one of the most promising energy storage devices for next-generation automotive batteries due to its extremely high theoretical energy density. The design and preparation...

Multi-length scale microstructural design of lithium-ion battery electrodes for improved discharge rate performance

Fast discharge capability of automotive batteries not only affects the acceleration and climbing performance of electric vehicles, but also the accessible driving range under complex driving cycles. Understanding the intricate...

Environmental Life Cycle Impacts of Automotive Batteries Based on a Literature Review

We compiled 50 publications from the years 2005–2020 about life cycle assessment (LCA) of Li-ion batteries to assess the environmental effects of production, use, and end of life for application in electric vehicles. Investigated LCAs showed for the production of a battery pack per kWh battery capacity a median of 280 kWh/kWh_bc (25%-quantile–75%-quantile: 200–500 kWh/kWh_bc) for the primary energy consumption and a median of 120 kg CO2-eq/kWh_bc (25%-quantile–75%-quantile: 70–175 kg CO2-eq/kWh_bc) for greenhouse gas emissions. We expect results for current batteries to be in the lower range. Over the lifetime of an electric vehicle, these emissions relate to 20 g CO2-eq/km (25%-quantile–75%-quantile: 10–50 g CO2-eq/km). Considering recycling processes, greenhouse gas savings outweigh the negative environmental impacts of recycling and can reduce the life cycle greenhouse gas emissions by a median value of 20 kg CO2-eq/kWh_bc (25%-quantile–75%-quantile: 5–29 kg CO2-eq/kWh_bc). Overall, many LCA results overestimated the environmental impact of cell manufacturing, due to the assessments of relatively small or underutilized production facilities. Material emissions, like from mining and especially processing from metals and the cathode paste, could have been underestimated, due to process-based assumptions and non-regionalized primary data. Second-life applications were often not considered.