Microencapsulation of Phenolic Extracts from Cocoa Shells to Enrich Chocolate Bars

Cocoa bean shells were subjected to green extraction technologies, based on the absence of toxic organic solvents, to recover polyphenols; the extract was then encapsulated using a spray dryer and maltodextrin as coating agent. The best conditions observed in the spray drying tests (core-to-coating ratio 1:5; inlet temperature 150 °C; flow rate 6 ml min−1) were applied to produce the microcapsules used to enrich the same cocoa mass as the shells and processed for the preparation of the chocolate bars. Sensory analysis showed no significant differences between enriched chocolate bar and the unenriched reference one, except for the appearance. Both samples were then subjected to accelerated storage tests, at the end of which the polyphenols in the control chocolate bar (0.85 g 100 g−1) were reduced by about 50% (0.42 g 100 g−1), while in the enriched chocolate (1.17 g 100 g−1) by only 22% (0.97 g 100 g−1). The proposed process significantly enriched the chocolate bars with phenolic antioxidants recovered from cocoa waste without increasing the sensations of bitterness and astringency.

Effect of Formulation Parameter on Dissolution Rate of Flurbiprofen Using Liquisolid Compact

Attempts were made to improve solubility and the liquisolid technology dissolving of medication flurbiprofen. Liquisolid pill was developed utilizing transcutol-HP, polyethylene glycol 400, Avecil PH 102 carrier material and Aerosil 200 layer coating material. Suitable excipient amounts were determined to produce liquisolid powder using a mathematical model. On the other hand, flurbiprofen tablet with the identical composition, directly compressed, was manufactured for comparison without the addition of any unvolatile solvent. Both powder combination characterizations and after-compression tablets were evaluated. The pure drug and physical combination, and chosen liquisolid tablets were studied in order to exclude interacting with the differentional scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FTIR). The results showed that transcutol is the ideal solvent with a solubility of 260±3.9 mg/ml in flurbiprofen. All formula developed were determined to be flowable within the specified limitations. The transcutol-like liquidsolid tablet formula of 35 percent w/w flurbiprofen and carrier to coating ratio of 10 was the most acceptable for the disintegration time, the tablet weight and other approved tablet characteristics. DSC thermographs demonstrated the development of a solid flurbiprofen amorphic solid solution for both the physical blend of the chosen liquisolid system and its tablets. The lack of chemicals interaction in medication and other components of the formula was demonstrated by the retention of all flurbiprofen characteristic peaks in all FTIR spectra. As an option to enhance solubility and dissolve flurbiprofen, which has a poor water solubility, liquisolid tablet has been evaluated.

Expanded Polystyrene Beads Coated with Intumescent Flame Retardant Material to Achieve Fire Safety Standards

The compatibility and coating ratio between flame retardant materials and expanded polystyrene (EPS) foam is a major impediment to achieving satisfactory flame retardant performance. In this study, we prepared a water-based intumescent flame retardant system and methylene diphenyl diisocyanate (MDI)-coated expandable polystyrene microspheres by a simple coating approach. We investigated the compatibility, coating ratio, and fire performance of EPS- and MDI-coated EPS foam using a water-based intumescent flame retardant system. The microscopic study revealed that the water-based intumescent flame retardant materials were successfully incorporated with and without MDI-coated EPS microspheres. The cone calorimeter tests (CCTs) of the MDI-coated EPS containing water-based intumescent flame retardant materials exhibited better flame retardant performance with a lower total heat release (THR) 7.3 MJ/m2, peak heat release rate (PHRR) 57.6 kW/m2, fire growth rate (FIGRA) 2027.067 W/m2.s, and total smoke production (TSP) 0.133 m2. Our results demonstrated that the MDI-coated EPS containing water-based intumescent flame retardant materials achieved flame retarding properties as per fire safety standards.

KAJIAN AKTIVITAS ANTIOKSIDAN MIKROKAPSUL EKSTRAK KULIT TERONG UNGU (Solanum melongena L)

Study about antioxidant activity of microcapsule of purple eggplant (Solanum melongena L) peel extract has ben done. The research aimed to find the best pH and coating ratio for yielding microcapsule with the highest antioxidant activity. It was done by applying 5 levels of both pH variation of 2, 3, 4, 5, 6 and maltodextrin ratio of 1:1, 2:1, 3:1, 4:1, 5:1 (w/v). The determination of antioxidant activity was done by DPPH method. The result showed that at pH 2 and 1:1 of maltodextrin coating ratio were the best condition to yield the highest antioxidant activity i.e 32.54 % and 96.31 %, respectively. Keywords: Purple eggplant peel, maltodextrin, microcapsule, antioxidant activity

Mikroenkapsulasi Senyawa Fenolik Ekstrak Daun Kenikir (Cosmos caudatus K.)

Daun Kenikir (Cosmos caudatus K.) memiliki kandungan senyawa fenolik dan aktivitas antioksidan yang tinggi. Senyawa fenolik telah diketahui sensitif terhadap cahaya, oksigen dan panas. Enkapsulasi dapat melindungi senyawa fenolik dalam ekstrak. Penelitian ini bertujuan untuk mempelajari pengaruh rasio bahan inti:bahan penyalut (1:10 dan 1: 20) dan suhu inlet spray dryer (125, 150 dan 175oC) terhadap karakteristik mikrokapsul. Pada penelitian tahap pendahuluan, daun kenikir diekstraksi menggunakan pelarut etanol, kemudian ekstrak yang diperoleh dianalisis aktivitas antioksidan dan total fenolik. Pada tahap selanjutnya ekstrak dienkapsulasi dan mikrokapsul yang diperoleh dianalisis powder recovery, kandungan total fenolik, effisiensi enkapsulasi, aktivitas antioksidan dan ukuran partikel. Rasio bahan inti:bahan penyalutdansuhu inlet spray dryer mempengaruhi powder recovery, total fenolik, effisiensi enkapsulasi, aktivitas antioksidan dan ukuran partikel mikrokapsul. Perlakuan dengan rasio bahan inti:bahan penyalut1:20 dan suhu inlet spray dryer 125oC menghasilkan mikrokapsul dengan powder recovery 59,87%, total fenol 24,644 mgGAE/g sampel, efisiensi enkapsulasi 98,820%, aktivitas antioksidan (IC50) 1711,804 ppm dan ukuran partikel 1,55 µm.Microencapsulation Of Phenolic Compounds From Cosmos caudatus K. Leaves ExtractCosmos caudatus K. leaves are high in total phenolic content and have high antioxidant activity. Phenolic compounds are sensitive to light, oxygen, and heat. Encapsulation process can protect the phenolic compounds of extract. This research was aimed to study the effect of core to coating ratio (1:10 and 1:20) and spray drying inlet temperature (125, 150, and 175°C) towards the characteristics of microcapsules. In preliminary stage, Cosmos caudatus K. leaves were extracted with ethanol. The extract was analyzed for antioxidant activity and total phenolic content. In the main stage, the extract were encapsulated. The microcapsules were analyzed for powder recovery, total phenolic content, encapsulation efficiency, antioxidant activity, and particle size. Core to coating ratio and inlet temperature affected the powder recovery, total phenolic content, encapsulation efficiency, antioxidant activity, and particle size of microcapsules. Microcapsules with core to coating ratio 1:20 and inlet temperature 125°C gave the best result with powder recovery 59.87%, total phenolic content 24.644 mg GAE/g sample, encapsulation efficiency 98.820%, IC50 1711.804 ppm, and particle size 1.55 μm. •

The Classification Mechanism of ZrB2 Powder Materials via the Sedimentation Method

With the development of science and technology, the more and more demand of ultra-fine powder is showed. The ZrB2/A1(OH)3-Y(OH)3 core-shell composite particles already are synthesized. To obtain the better A1(OH)3-Y(OH)3 composite shell, the higher coating ratio on the ZrB2 particles surfaces to prepare high performance multiphase ceramics, the classification of ZrB2 raw material is investigated by the sedimentation method. The sedimentation time of classing ZrB2 particles is decided for 30 minutes to reach fine ZrB2 particles with smaller size and narrower distribution is obtained.