Effect of intercropping of maize and cowpea on the yield, land productivity and profitability of components crops in Bena- Tsemay Woreda, Southern Ethiopia

Field experiment was carried out during the 2017-18 cropping season at Kako, Bena-Ttsemay woreda, South Omo zone, Southern Ethiopia to determine the effect of intercropping of maize and cowpea on the yield, land use efficiency and profitability of both crops. The experiment consisted of 4 treatments (sole maize, sole cowpea, one row maize to one row cowpea and one row maize to two-row cowpea) and laid in RCBD in four replications. Intercropping of one row maize to one row cowpea and one row maize to two-row cowpea, resulted in 55.8% and 27.9% greater land use efficiency than for either crop grown alone. The highest MAI was obtained by growing one row of maize to one row of cowpea (11563.17) followed by one row maize to two-rows of cowpea (6783.50).Based on the present finding, intercropping of one row maize and one row cowpea more economic advantage than the other crop combination or grown alone. Therefore, intercropping of one row maize to one row cowpea is an advantageous to farmers in the study area since it would provide additional crop yield with the same piece of land and more profitable related to cost benefit. Int. J. Agril. Res. Innov. Tech. 11(2): 147-150, Dec 2021

Remote Monitoring of CIEDs—For Both Safety, Economy and Convenience?

Cardiac implantable electronic devices such as pacemakers and defibrillators are increasingly monitored by systems transmitting information directly from the patient to the hospital. This may increase safety and patient satisfaction and also under certain circumstances represent an economic advantage. The review summarizes some of the recent research in the field of remote monitoring of cardiac devices.

Economic advantage of ‘self-made’ antibiotic-loaded spacer compared to prefabricated antibiotic-loaded spacer and spacer molds in two-staged revision arthroplasty

Infection after total hip or total knee arthroplasty is a serious complication implying great costs for the health care system. Amongst the different treatment options, the two-step exchange using a spacer in the interval is a valid option. We evaluate the economic impact of our self-made antibiotic-loaded hip and knee cement spacers compared with prefabricated spacers and spacer molds. Costs to prepare self-made cement spacers are detailed for each spacer type. We also assess the intraoperative time spent for fabricating our self-made hip and knee spacers. The price of these self-made knee spacer is 514 CHF (450 EUR / 505 USD) if non-articulated and 535 CHF (470 EUR / 525 USD) if articulated ; the price for the self-made hip spacer is 749 CHF (760 EUR / 735 USD). Our average preparation time is 14 minutes for our self-made knee spacers and 16 minutes for our self-made hip spacers. While the senior surgeon is fabricating the self-spacers, another surgeon of the team continues intensive irrigation and debridement. Thus, no time is lost waiting for the self-spacer to be fabricated. In our hands, self-made hip and knee spacers are at least 40-50% cheaper than prefabricated spacers and spacer-molds. This is a serious economic advantage in this already expensive surgery. When done in teamwork, self-spacer fabrication does not increase the surgery time. The economic advantage is added to the main and most important advantage of self- made spacers, which remains the possibility of patient adapted anatomical reconstruction of the joint.

Investigation of Microstructure and Mechanical Properties for Ti-6Al-4V Alloy Parts Produced Using Non-Spherical Precursor Powder by Laser Powder Bed Fusion

An unmodified, non-spherical, hydride-dehydride (HDH) Ti-6Al-4V powder having a substantial economic advantage over spherical, atomized Ti-6Al-4V alloy powder was used to fabricate a range of test components and aerospace-related products utilizing laser beam powder-bed fusion processing. The as-built products, utilizing optimized processing parameters, had a Rockwell-C scale (HRC) hardness of 44.6. Following heat treatments which included annealing at 704 °C, HIP at ~926 °C (average), and HIP + anneal, the HRC hardnesses were observed to be 43.9, 40.7, and 40.4, respectively. The corresponding tensile yield stress, UTS, and elongation for these heat treatments averaged 1.19 GPa, 1.22 GPa, 8.7%; 1.03 GPa, 1.08 GPa, 16.7%; 1.04 GPa, 1.09 GPa, 16.1%, respectively. The HIP yield strength and elongation of 1.03 GPa and 16.7% are comparable to the best commercial, wrought Ti-6Al-4V products. The corresponding HIP component microstructures consisted of elongated small grains (~125 microns diameter) containing fine, alpha/beta lamellae.

If the height is right

This study aimed to provide an explanation on the perceptions of height by selected Filipino youth and discuss the factors that shape these perceptions. Both quantitative and qualitative surveys were conducted on 300 youth participants (150 males and 150 females), where they rated 30 statements and answered open-ended questions. Quantitative data were analyzed statistically, and qualitative data were arranged into a comprehensive matrix and thematic coding of responses. Height mainly symbolizes three components: advantage, capability and desirability. Participants believe that being tall is an advantage in playing sports, will open up opportunities for work, and can help in doing everyday tasks. Height can also be a key to attracting the opposite sex. The ‘bigger is better’ prejudice appears to extend to a person’s experiences as well—short people’s experiences differ from those of taller people. Benefits brought by tallness is so sought that many Filipinos exert extra efforts to grow taller. Tall bodies demonstrate a non-economic advantage that gives higher status and sociopolitical distinction in the Filipino society.

Profit, Self, and Agency: A Reevaluation

In 1939, Erich Fromm argued that capitalist culture imbues the pursuit of economic advantage with moral tensions that harm self and psyche. Since this time, the inner implications of such tensions have been somewhat overlooked by theorists, and not without seemingly good reasons. By many accounts, social and technological developments in the later decades of the 20th century have ostensibly reduced the cultural tensions surrounding profit making and mitigated their inner effects. This article, however, presents a different account. Drawing from literature on culture, self, and subjectivity in the neoliberal era, it argues that the tensions Fromm identified have actually been recreated in new, sometimes more elusive ways that bear substantial inner costs. Moreover, focusing on economic elites, this article analytically explores the agentic implications of these inner costs. It argues that the moral tensions that haunt profit making ironically stand at the basis of capitalist agency, shaping its materialistic default through processes rooted in self.

Biochemical Methane Potential (BMP) from sugarcane biorefinery residues: maximizing their use by co-digestion

ABSTRACTThis work evaluated the methane (CH4) production potential from residues of integrated 1st (vinasse and filter cake) and 2nd (deacetylation pretreatment liquor from straw) generation (1G2G) sugarcane biorefinery. The small-scale study provided fundamentals for basing the optimization of co-digestion by assessing the best co-substrates synergistic conditions. Biochemical Methane Potential (BMP) tests showed co-digestion enhanced CH4 yield of isolated substrates, reaching 605 NmLCH4 gVS−1. Vinasse and deacetylation liquor as the only co-substrates increased the BMP by 37.72%, indicating that the association of these two residues provided positive effects for co-digestion by nutritionaly benefeting the methanogenic activity. The filter cake had the lowest BMP (260 NmLCH4 gVS−1) and digestibility (≤40%), being the stirring required to improve the mass transfer of biochemical reactions. The alkaline characteristic of the liquor (pH-prevented alkalinizers from being added to the co-digestion, which could be a relevant economic advantage for the implementation of the process in an industrial scale. The co-digestion system has proven to efficiently maximize waste management in the 1G2G sugarcane biorefineries and potentially enhance their energy generation (by at least in 18%), providing experimental elements for placing the biogas production as the hub of the bioeconomy in the agroindustrial sector.

The Adoption of Landraces of Durum Wheat in Sicilian Organic Cereal Farming Analysed Using a System Dynamics Approach

The adoption of rare, traditional crops represents a good example of enhancing functional agrobiodiversity, not only to provide benefits for farmers but also for society as a whole. The study outlined in this paper aims to verify how and under local social-ecological conditions the combination of organic cereal farming and growing of durum wheat landraces can be profitably applied. Focusing on Sicily as one of the most developed cereal systems existing in southern Italy, the study deployed a comparison between data from the regional dataset by the Farm Accountancy Data Network (FADN) and the data provided by the Association of farmers called Simenza. Thereafter, we used a System Dynamics Approach (SDA) for a better understanding of the main drivers which will most likely affect the profitability of the system in the medium and long term. The results clearly demonstrated how the durum wheat organic system under investigation might still develop under the push of an increasing relative economic advantage between standard varieties and landraces.

Application of a Combined Transmittance/Fluorescence Leaf Clip Sensor for the Nondestructive Determination of Nitrogen Status in White Cabbage Plants

The correct fertilization of vegetable crops is commonly determined on the basis of soil and plant costly destructive analyses, demanding more sustainable non-invasive optical detection. Here, we tested the ability of the combined transmittance/fluorescence leaf clip Dualex device for determining the nitrogen (N) status of cabbage plants. Fully developed leaves from plants grown under different N rates of 0; 100; 200; 300 kg N ha−1 in 2018 and 2019 were measured in the field by the Dualex sensor twice a year in July and October. The chlorophyll (Chl) and nitrogen (nitrogen balance index, NBI) indices and the flavonols (Flav) index of the sensor were positively and negatively correlated to leaf nitrogen, respectively. Merging the two-years data, the NBI versus leaf N correlation was less point dispersed in October than July (R2 = 0.76 and 0.64, respectively). NBI was also correlated to cabbage yield, better in July than October. Our results showed that the multiparametric Dualex device can be used as precision agriculture tool for the early prediction of plant N and cabbage yield with economic advantage for the growers and reduced environmental contamination due to nitrate leaching.

REPRODUCTIVE PERFORMANCE OF HATCHERY-BRED, WILD-CAUGHT BROODSTOCK, AND THEIR OUTBREED OF THE AFRICAN CATFISH Clarias gariepinus (Burchell, 1822)

This study was conducted to evaluate the reproductive performance of hatchery-bred and wild-caught broodstock of Clarias gariepinus. Thirty pairs of each hatchery-bred and wild-caught broodstock (15 females and 15 males) was used for the study. Induced breeding was carried out in four groups with three replications at a ratio of 1:1 by hypophysation method. Group A: hatchery-bred male and hatchery-bred female (HBM m + HBF f); B: wild-caught male and wild-caught female (WCM m + WCF f), C: hatchery-bred female and wild-caught male (HBF f+ WCM m) and D: wild-caught female and hatchery-bred male C. gariepinus (WCF f + HBM m). Results showed that egg diameter, sperm motility, sperm density, and male GSI were not significantly different (P>0.05) whereas ovary weight, sperm volume, fecundity, female GSI, and percentage fertilization were significantly higher (P<0.05) in hatchery-bred broodstock than wild-caught broodstock. Hatchability was significantly higher (P<0.05) in Group C and D than A and B. In conclusion, a better reproductive performance in C. gariepinus with an economic advantage could be recorded through the combination of wild-caught and hatchery-bred broodstock.