Influence of crustal lithology and the thermal state on microseismicity in the Wakayama region, southern Honshu, Japan

Here we investigate the influence of the lithology and thermal state of the upper crust on earthquake distributions beneath the Wakayama region, southern Honshu, Japan, to better understand the influence of crustal conditions on regional seismogenesis. The earthquakes are concentrated in the deeper sections of mafic belts and shallower sections of pelitic belts, based on a comparison of relocated hypocenters and estimated subsurface geological structures. We compare the frictional properties of pelitic rocks and basalt, as obtained from petrological experiments, with the hypocenter depth distributions in pelitic and mafic belts to assess the control of crustal lithology on the depth extent of regional seismicity. The earthquake distributions are consistent with the temperature ranges over which the respective rock types are expected to exhibit a velocity-weakening behavior, based on the petrological experiments. The results suggest that the occurrence of shallow intraplate earthquakes is controlled by the temperature- and lithology-dependent friction of the upper crust.

The Role of GPR in Community-Driven Compliance Archaeology with Tribal and Non-tribal Communities in Central California

For tribes whose preservation values and mitigation strategies for managing cultural heritage are built on an ethic of avoidance and minimal disturbance, geophysical technologies can be key components of the research design. These technologies, most notably ground-penetrating radar, have been used with great success in identifying and evaluating the depth, extent, and composition of some of those resources for heritage research and management purposes, easing tensions when working with sensitive ancestral places. Additionally, research in archaeological geophysics has shifted from feature finding in order to excavate targets of interest to the recognition that geophysical survey can provide data and interpretations for whole sites and landscapes complementary to or beyond that of excavation, especially regarding the intactness and sensitivity of cultural heritage sites. This use of geophysics as a primary method for research rather than a precursor to archaeological research has empowered tribes with another tool to advocate for low-impact investigation of ancestral sites and landscapes that position tribes as pro-science. Geophysical technologies provide scientifically rigorous yet minimally impactful strategies for investigating heritage while satisfying the requirements of academic and compliance archaeology in ways that can also be culturally appropriate for a much broader spectrum of tribal cultural heritage under consideration.

Geophysical Investigation of a Fault Zone from Aeromagnetic Data over the Ageva Area of Okene Kogi State, Nigeria

High-resolution aeromagnetic data over a part of Ageva fault zone in Nigeria have been analyzed with a view to estimate sedimentary thicknesses within the studied area. The data set of this study area, was subjected to various corrections and interpretation techniques. Regional residual correction was done and the noise level of the data was reduced via upward continuation to a height of 250 m thereby enhancing the reliability of the results obtained. Qualitative interpretation techniques which include: Second Vertical Derivative, Analytic Signal, Tilt derivative were used to delineate the trending pattern of the anomalies in the study area which are in the E-W, NE-SW, NW-SE, and N-S directions. The result suggests that fault zone within Ageva and Owo may be mineralized and also that the faults within Ageva and Ibilo extend by a quarter of their exposed length. The Werner solutions revealed that inferred faults within Owo and Ibilo may have relatively low susceptibilities as compared with others in the study area and the range of the depth extent of linear features is 401.5 m – 982.5 m.

Effects of heterogeneity on frictional-viscous deformation and the depth-extent of the seismogenic zone

<p>Current conceptual fault models define a seismogenic zone, where earthquakes nucleate, characterised by velocity-weakening fault rocks in a dominantly frictional regime. The base of the seismogenic zone is commonly inferred to coincide with a thermally controlled onset of velocity-strengthening slip or distributed viscous deformation. The top of the seismogenic zone may be determined by low-temperature diagenetic processes and the state of consolidation and alteration. Overall, the seismogenic zone is therefore described as bounded by transitions in frictional and rheological properties. These properties are relatively well-determined for monomineralic systems and simple, planar geometries; but, many exceptions, including deep earthquakes, slow slip, and shallow creep, imply processes involving compositional, structural, or environmental heterogeneities. We explore how such heterogeneities may alter the extent of the seismogenic zone.</p><p> </p><p>We consider mixed viscous-frictional deformation and suggest a simple rule of thumb to estimate the role of heterogeneities by a combination of the viscosity contrast within the fault, and the ratio between the bulk shear stress and the yield strength of the strongest fault zone component. In this model, slip behaviour can change dynamically in response to stress and strength variations with depth and time. We quantify the model numerically, and illustrate the idea with a few field-based examples: 1) earthquakes within the viscous regime, deeper than the thermally-controlled seismogenic zone, can be triggered by an increase in the ratio of shear stress to yield strength, either by increased fluid pressure or increased local stress; 2) there is commonly a depth range of transitional behaviour at the base of the seismogenic zone – the thickness of this zone increases markedly with increased viscosity contrast within the fault zone; and 3) fault zone weakening by phyllosilicate growth and foliation development increases viscosity ratio and decreases bulk shear stress, leading to efficient, stable, fault zone creep. These examples are not new interpretations or observations, but given the substantial complexity of heterogeneous fault zones, we suggest that a simplified, conceptual model based on basic strength and stress parameters is useful in describing and assessing the effect of heterogeneities on fault slip behaviour.         </p>

Lower oceanic <i>δ</i>¹³C during the last interglacial period compared to the Holocene

The last time in Earth's history when high latitudes were warmer than during pre-industrial times was the last interglacial period (LIG, 129–116 ka BP). Since the LIG is the most recent and best documented interglacial, it can provide insights into climate processes in a warmer world. However, some key features of the LIG are not well constrained, notably the oceanic circulation and the global carbon cycle. Here, we use a new database of LIG benthic δ13C to investigate these two aspects. We find that the oceanic mean δ13C was ∼ 0.2 ‰ lower during the LIG (here defined as 125–120 ka BP) when compared to the Holocene (7–2 ka BP). A lower terrestrial carbon content at the LIG than during the Holocene could have led to both lower oceanic δ13C and atmospheric δ13CO2 as observed in paleo-records. However, given the multi-millennial timescale, the lower oceanic δ13C most likely reflects a long-term imbalance between weathering and burial of carbon. The δ13C distribution in the Atlantic Ocean suggests no significant difference in the latitudinal and depth extent of North Atlantic Deep Water (NADW) between the LIG and the Holocene. Furthermore, the data suggest that the multi-millennial mean NADW transport was similar between these two time periods.

Large-displacement, hydrothermal frictional properties of DFDP-1 fault rocks, Alpine Fault, New Zealand: Implications for deep rupture propagation

©2016. The Authors. The Alpine Fault, New Zealand, is a major plate-bounding fault that accommodates 65-75% of the total relative motion between the Australian and Pacific plates. Here we present data on the hydrothermal frictional properties of Alpine Fault rocks that surround the principal slip zones (PSZ) of the Alpine Fault and those comprising the PSZ itself. The samples were retrieved from relatively shallow depths during phase 1 of the Deep Fault Drilling Project (DFDP-1) at Gaunt Creek. Simulated fault gouges were sheared at temperatures of 25, 150, 300, 450, and 600°C in order to determine the friction coefficient as well as the velocity dependence of friction. Friction remains more or less constant with changes in temperature, but a transition from velocity-strengthening behavior to velocity-weakening behavior occurs at a temperature of T = 150°C. The transition depends on the absolute value of sliding velocity as well as temperature, with the velocity-weakening region restricted to higher velocity for higher temperatures. Friction was substantially lower for low-velocity shearing (V < 0.3 μm/s) at 600°C, but no transition to normal stress independence was observed. In the framework of rate-and-state friction, earthquake nucleation is most likely at an intermediate temperature of T = 300°C. The velocity-strengthening nature of the Alpine Fault rocks at higher temperatures may pose a barrier for rupture propagation to deeper levels, limiting the possible depth extent of large earthquakes. Our results highlight the importance of strain rate in controlling frictional behavior under conditions spanning the classical brittle-plastic transition for quartzofeldspathic compositions.

Large-displacement, hydrothermal frictional properties of DFDP-1 fault rocks, Alpine Fault, New Zealand: Implications for deep rupture propagation

©2016. The Authors. The Alpine Fault, New Zealand, is a major plate-bounding fault that accommodates 65-75% of the total relative motion between the Australian and Pacific plates. Here we present data on the hydrothermal frictional properties of Alpine Fault rocks that surround the principal slip zones (PSZ) of the Alpine Fault and those comprising the PSZ itself. The samples were retrieved from relatively shallow depths during phase 1 of the Deep Fault Drilling Project (DFDP-1) at Gaunt Creek. Simulated fault gouges were sheared at temperatures of 25, 150, 300, 450, and 600°C in order to determine the friction coefficient as well as the velocity dependence of friction. Friction remains more or less constant with changes in temperature, but a transition from velocity-strengthening behavior to velocity-weakening behavior occurs at a temperature of T = 150°C. The transition depends on the absolute value of sliding velocity as well as temperature, with the velocity-weakening region restricted to higher velocity for higher temperatures. Friction was substantially lower for low-velocity shearing (V < 0.3 μm/s) at 600°C, but no transition to normal stress independence was observed. In the framework of rate-and-state friction, earthquake nucleation is most likely at an intermediate temperature of T = 300°C. The velocity-strengthening nature of the Alpine Fault rocks at higher temperatures may pose a barrier for rupture propagation to deeper levels, limiting the possible depth extent of large earthquakes. Our results highlight the importance of strain rate in controlling frictional behavior under conditions spanning the classical brittle-plastic transition for quartzofeldspathic compositions.

Influence of pre-existing structure on pluton emplacement and geomorphology: The Merrimac plutons, northern Sierra Nevada, California, USA

In much of the western Cordillera of North America, the geologic frame­work of crustal structure generated in the Mesozoic leaves an imprint on later plutonic emplacement, subsequent structural setting, and present landscape morphology. The Merrimac plutons in the northern Sierra Nevada (California, USA) are a good example of the influence of pre-existing structure at a larger scale. This paper updates and refines earlier studies of the Merrimac plutons, with the addition of analysis of gravity and magnetic data and new 206Pb/238U zircon dates. The gravity and magnetic data not only confirm the presence of two different neighboring plutons, but also (1) support the presence of a third pluton, (2) refine the nature of the contact between the Merrimac plutons as being structurally controlled, and (3) estimate the depth extent of the plutons to be ~4–5 km. The zircon 206Pb/238U dates indicate that the two main plutons have statistically different crystallization ages nearly 4 m.y. apart. Geomorphic analyses, including estimates of relief, roughness and drainage density and generation of chi plots, indicate that the two main plutons are characterized by different elevations with large longitudinal channel knickpoints that we speculatively attribute to possible reactivation of pre-existing structure in addition to lithologic variations influencing relative erosion susceptibility in response to prior accelerated surface uplift.

Frictional properties of anorthite (feldspar): implications for the lower boundary of the seismogenic zone

Earthquake magnitude is closely related to the depth extent of the seismogenic zone, and higher magnitude earthquakes occur where the seismogenic zone is thicker. The frictional properties of the dominant mineral constituents of the crust, such as feldspar-group minerals, control the depth extent of the seismogenic zone. Here, the velocity dependence of the steady-state friction of anorthite, the calcic endmember of the feldspar mineral series, was measured at temperatures from 20 to 600 °C, pore pressures of 0 (“dry”) and 50 MPa (“wet”), and an effective pressure of 150 MPa. The results support previous findings that the frictional properties of feldspar play a dominant role in limiting the depth extent of the seismogenic zone. This evidence suggests that brittle deformation of anorthite may be responsible for brittle fault movements in the brittle–plastic transition zone.