phosphate addition
Recently Published Documents


TOTAL DOCUMENTS

102
(FIVE YEARS 23)

H-INDEX

18
(FIVE YEARS 6)

Cells ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 3571
Author(s):  
Tatiana Yu. Plyusnina ◽  
Sergei S. Khruschev ◽  
Polina V. Fursova ◽  
Alexei E. Solovchenko ◽  
Taras K. Antal ◽  
...  

Using a mathematical simulation approach, we studied the dynamics of the green microalga Chlorella vulgaris phosphate metabolism response to shortage and subsequent replenishing of inorganic phosphate in the medium. A three-pool interaction model was used to describe the phosphate uptake from the medium, its incorporation into the cell organic compounds, its storage in the form of polyphosphates, and culture growth. The model comprises a system of ordinary differential equations. The distribution of phosphorous between cell pools was examined for three different stages of the experiment: growth in phosphate-rich medium, incubation in phosphate-free medium, and phosphate addition to the phosphorus-starving culture. Mathematical modeling offers two possible scenarios for the appearance of the peak of polyphosphates (PolyP). The first scenario explains the accumulation of PolyP by activation of the processes of its synthesis, and the decline in PolyP is due to its redistribution between dividing cells during growth. The second scenario includes a hysteretic mechanism for the regulation of PolyP hydrolysis, depending on the intracellular content of inorganic phosphate. The new model of the dynamics of P pools in the cell allows one to better understand the phenomena taking place during P starvation and re-feeding of the P-starved microalgal cultures with inorganic phosphate such as transient PolyP accumulation. Biotechnological implications of the observed dynamics of the polyphosphate pool of the microalgal cell are considered. An approach enhancing the microalgae-based wastewater treatment method based on these scenarios is proposed.


The formation of magnesium silicate hydrate gel is crucial in preventing magnesia aggregates from over hydrated during the construction of refractory castables since the presence of magnesium hydroxide diminish the mechanical properties of the material. This work aimed to investigate the accelerating effects of sodium hydrogen phosphate and heat treatment on the formation of magnesium silicate hydrate gel. Time-dependent pH of magnesia - silica fume slurries with and without sodium hydrogen phosphate addition and heat treatment was measured to verify the dissolution of MgO and magnesium silicate hydrate formation. The effects of sodium hydrogen phosphate were differentiable only at small added amounts, whereas heat treatment at 50 degrees Celsius performed noticeable acceleration. This observation could be applicable in molding to maintain the stability of basic refractory castables.


2021 ◽  
Vol 105 ◽  
pp. 102790
Author(s):  
Priscila Raquel Schiroky ◽  
Isadora Martini Garcia ◽  
Fernanda Coradini Noal ◽  
Vicente Castelo Branco Leitune ◽  
Fernando Borba de Araújo ◽  
...  

2021 ◽  
Vol 755 ◽  
pp. 142570
Author(s):  
Da Tian ◽  
Mu Su ◽  
Xiang Zou ◽  
Liangliang Zhang ◽  
Lingyi Tang ◽  
...  

2021 ◽  
Vol 35 (1) ◽  
pp. 1031-1042
Author(s):  
Sergio García-Salas ◽  
Elías Octavio Gómez-Montes ◽  
María Guadalupe Ramírez-Sotelo ◽  
María del Carmen Oliver-Salvador

Author(s):  
Liew Phing Pui ◽  
Roselina Karim ◽  
Yus Aniza Yusof ◽  
Chen Wai Wong ◽  
Hasanah Mohd Ghazali

‘Cempedak’ fruit, an aromatic fruit that has a short shelf life can be converted into powder through spray-drying process. However, the spray-dried powder that was obtained had a high tendency to cake. Hence, three different anti-caking agents (calcium silicate, silicon dioxide, and calcium phosphate) were added separately at a concentration of 1.5% (w/w). It was found that calcium phosphate (1.5% w/w) yielded ‘cempedak’ fruit powder with lowest moisture content, water activity, hygroscopicity, and caking (change in cake height ratio), with minimal color changes in its reconstituted form and low viscosity. Different calcium phosphate concentration (0-2.00% w/w) was then applied in the production of ‘spray-dried’ powder. With increase of calcium phosphate addition from 0 to 0.66%, the moisture content, water activity, hygroscopicity, cake height ratio of ‘cempedak’ powder decreased, with no significant decrease with further addition. Calcium phosphate (0.66 % w/w) yielded powder with the best properties: lowest moisture content (4.65%), water activity (0.18), hygroscopicity (22.0), and change in cake height ratio (0.17). In addition, there was a minimal change in color of its reconstituted powder, with a slight change in viscosity.


Author(s):  
Khairunnisa Zulkifly ◽  
Heah Cheng-Yong ◽  
Liew Yun-Ming ◽  
Mohd Mustafa Al Bakri Abdullah ◽  
Ong Shee-Ween ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document