Strain-controlled thermoelectric properties of phosphorene-carbon monosulfide hetero-bilayers

The application of strain to 2D materials allows manipulating the electronic, magnetic, and thermoelectric properties. These physical properties are sensitive to slight variations induced by tensile and compressive strain and the uniaxial strain direction. Herein, we take advantage of the reversible semiconductor-metal transition observed in certain monolayers to propose a hetero-bilayer device. We propose to pill up phosphorene (layered black phosphorus) and carbon monosulfide monolayers. In the first, such transition appears for positive strain, while the second appears for negative strain. Our first-principle calculations show that depending on the direction of the applied uniaxial strain; it is possible to achieve reversible control in the layer that behaves as an electronic conductor while the other layer remains as a thermal conductor. The described strain-controlled selectivity could be used in the design of novel devices.

Probing the in-plane liquid-like behavior of liquid crystal elastomers

When isotropic solids are unequally stretched in two orthogonal directions, the true stress (force per actual cross-sectional area) in the larger strain direction is typically higher than that in the smaller one. We show that thiol-acrylate liquid crystal elastomers with polydomain texture exhibit an unusual tendency: The true stresses in the two directions are always identical and governed only by the area change in the loading plane, independently of the combination of imposed strains in the two directions. This feature proves a previously unidentified state of matter that can vary its shape freely with no extra mechanical energy like liquids when deformed in the plane. The theory and simulation that explain the unique behavior are also provided. The in-plane liquid-like behavior opens doors for manifold applications, including wrinkle-free membranes and adaptable materials.

Development of PZT fiber rosette to locate acoustic source

Because of their electro-mechanical coupling property, Lead-Zirconate-Titanate (PZT) materials have been widely used for ultrasonic wave sensing and actuation in structural health monitoring applications. In this paper, a PZT rosette concept is proposed to conduct Lamb wave-based damage detection in panel-like structures by exploring its best directional sensing capability. First, a directivity study was conducted to investigate sensing of flexural Lamb wave propagation using a PZT fiber having d33 effects. Then, commercial off-the-shelf PZT fibers were polarized in-house in order to construct the PZT rosette configuration, in which three PZT fibers are oriented at 0°, 45°, 90°, respectively. Since Lamb wave responses are directly related to measured PZT fiber voltage signals, a simple interrogation scheme was developed to calculate principal strain direction in order to locate an acoustic source. Comprehensive tests were conducted to evaluate the performance of the proposed PZT rosette using an aluminum plate. It is shown that the PZT rosette is able to sense Lamb wave responses and accurately locate an acoustic source. We expect to further evaluate the PZT rosette performance when damages are introduced.

Stress fibers of the aortic smooth muscle cells in tissues do not align with the principal strain direction during intraluminal pressurization

Stress fibers (SFs) in cells transmit external forces to cell nuclei, altering the DNA structure, gene expression, and cell activity. To determine whether SFs are involved in mechanosignal transduction upon intraluminal pressure, this study investigated the SF direction in smooth muscle cells (SMCs) in aortic tissue and strain in the SF direction. Aortic tissues were fixed under physiological pressure of 120 mmHg. First, we observed fluorescently labeled SFs using two-photon microscopy. It was revealed that SFs in the same smooth muscle layers were aligned in almost the same direction, and the absolute value of the alignment angle from the circumferential direction was 16.8° ± 5.2° (n = 96, mean ± SD). Second, we quantified the strain field in the aortic tissue in reference to photo-bleached markers. It was found in the radial-circumferential plane that the largest strain direction was − 21.3° ± 11.1°, and the zero normal strain direction was 28.1° ± 10.2°. Thus, the SFs in aortic SMCs were not in line with neither the largest strain direction nor the zero strain direction, although their orientation was relatively close to the zero strain direction. These results suggest that SFs in aortic SMCs undergo stretch, but not maximal and transmit the force to nuclei under intraluminal pressure.

Electrospinning of Cellulose Nanocrystal-Reinforced Polyurethane Fibrous Mats

We report the electrospinning of mechanically-tunable, cellulose nanocrystal (CNC)-reinforced polyurethanes (PUs). Using high-aspect ratio CNCs from tunicates, the stiffness and strength of electrospun PU/CNC mats are shown to generally increase. Furthermore, by tuning the electrospinning conditions, fibrous PU/CNC mats were created with either aligned or non-aligned fibers, as confirmed by scanning electron microscopy. PU/CNC mats having fibers aligned in the strain direction were stiffer and stronger compared to mats containing non-aligned fibers. Interestingly, fiber alignment was accompanied by an anisotropic orientation of the CNCs, as confirmed by wide-angle X-ray scattering, implying their alignment additionally benefits both stiffness and strength of fibrous PU/CNC nanocomposite mats. These findings suggest that CNC alignment could serve as an additional reinforcement mechanism in the design of stronger fibrous nanocomposite mats.

Novel and Applicable Method to Determine Equivalent Strain Range and Equivalent Strain Direction Under Multiaxial Non-Proportional Loading

When considering mechanical components that are subjected to complex loading conditions, it is difficult to achieve accurate predictions of low-cycle fatigue life. For multiaxial and non-proportional loads, the principal strain directions vary in three-dimensional space with time. The commonly accepted methods to determine fatigue life under such loading conditions are based on a critical plane approach, and they rely heavily on accurate strain range estimates. However, there is no singly accepted method to determine the critical plane, equivalent strain magnitude, or equivalent strain direction. Furthermore, current suggestions are computationally intensive and challenging to implement. This paper offers a novel and concise method to accurately determine equivalent strain range and equivalent strain direction under multiaxial, non-proportional loading in three-dimensional space. A practical approach is provided for implementing the method, and an example of an application using a finite element model of a first stage turbine blade is discussed. To demonstrate the approach, ANSYS Mechanical was used to simulate a turbine blade under transient loading conditions and to determine the resulting strains. Equivalent strain range results were applied to a Coffin-Manson relation to determine the low-cycle fatigue life of every node within the finite element model of the first stage turbine blade. The post-processing of the strain predictions, which yielded the equivalent strain range and equivalent strain direction, is discussed in detail.