scholarly journals High Current, Low Voltage Current Mirrors and Applications

Author(s):  
S. S. Rajput ◽  
S. S. Jamuar
Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1832
Author(s):  
Jinfeng Liu ◽  
Xin Qu ◽  
Herbert Ho-Ching Iu

Low-voltage and high-current direct current (DC) power supplies are essential for aerospace and shipping. However, its robustness and dynamic response need to be optimized further on some special occasions. In this paper, a novel rectification system platform is built with the low-voltage and high-current permanent magnet synchronous generator (PMSG), in which the DC voltage double closed-loop control system is constructed with the backstepping control method and the sliding mode variable structure (SMVS). In the active component control structure of this system, reasonable virtual control variables are set to obtain the overall structural control variable which satisfied the stability requirements of Lyapunov stability theory. Thus, the fast-tracking and the global adjustment of the system are realized and the robustness is improved. Since the reactive component control structure is simple and no subsystem has to be constructed, the SMVS is used to stabilize the system power factor. By building a simulation model and experimental platform of the 5 V/300 A rectification module based on the PMSG, it is verified that the power factor of the system can reach about 98.5%. When the load mutation occurs, the DC output achieves stability again within 0.02 s, and the system fluctuation rate does not exceed 2%.


Author(s):  
Benjamin K. Rhea ◽  
Luke L. Jenkins ◽  
William E. Abell ◽  
Frank T. Werner ◽  
Christopher G. Wilson ◽  
...  
Keyword(s):  

2002 ◽  
Vol 15 (1) ◽  
pp. 93-101
Author(s):  
Lyes Bouzerara ◽  
Tahar Belaroussi ◽  
Boualem Amirouche

A low voltage, high dc gain and wideband load compensated cas code operational transconductance amplifier (OTA), using an active positive feedback with feed forward technique and frequency-dependent current mirrors (FDCM), is presented and analyzed. Such techniques stand as a powerful method of gain bandwidth and phase margin enhancements. In this paper, a frequency-dependent current mirror, whose input impedance increases with frequency, is used to form the feed forward path at the input of the current mirror with a feed forward capacitor. By using these techniques, the gain bandwidth product of the amplifier is improved from 115 MHz to 194 MHz, the phase margin is also improved from 85? to 95? and the gain is enhanced from 11 dB to 93 dB. This amplifier operates at 2.5 V power supply voltage drives a capacitive load of 1pF and gives a power dissipation of 7 mW. The predicted performance is verified by simulations using HSPICE tool with 0.8 fim CMOS AMS parameters.


2016 ◽  
Vol 2 (5) ◽  
pp. 1500355 ◽  
Author(s):  
Shideh Kabiri Ameri ◽  
Pramod K. Singh ◽  
Anthony J. D'Angelo ◽  
Matthew J. Panzer ◽  
Sameer R. Sonkusale

Sign in / Sign up

Export Citation Format

Share Document