Microphone Arrays for Video Camera Steering

2000 ◽  
pp. 239-259 ◽  
Author(s):  
Yiteng Huang ◽  
Jacob Benesty ◽  
Gary W. Elko
Keyword(s):  
Video Camera ◽  
Microphone Arrays

Ratio imaging of intracellular ion concentration

1992 ◽  
Vol 50 (2) ◽  
pp. 1160-1161
Author(s):  
Stephen R. Bolsover
Keyword(s):  
Individual Cell ◽  
Video Camera ◽  
Field Of View ◽  
Ion Concentration ◽  
Fluorescence Signal ◽  
Ion Imaging ◽  
Ratiometric Fluorescence ◽  
Ratio Imaging ◽  
The Mean ◽  
The Many

The field of intracellular ion concentration measurement expanded greatly in the 1980's due primarily to the development by Roger Tsien of ratiometric fluorescence dyes. These dyes have many applications, and in particular they make possible to image ion concentrations: to produce maps of the ion concentration within living cells. Ion imagers comprise a fluorescence microscope, an imaging light detector such as a video camera, and a computer system to process the fluorescence signal and display the map of ion concentration.Ion imaging can be used for two distinct purposes. In the first, the imager looks at a field of cells, measuring the mean ion concentration in each cell of the many in the field of view. One can then, for instance, challenge the cells with an agonist and examine the response of each individual cell. Ion imagers are not necessary for this sort of experiment: one can instead use a system that measures the mean ion concentration in a just one cell at any one time. However, they are very much more convenient.

High-resolution measurement of birefringent fine structure in living cells using a new polarized light microscope

1995 ◽  
Vol 53 ◽  
pp. 54-55
Author(s):  
Rudolf Oldenbourg
Keyword(s):  
Light Microscope ◽  
Fluorescent Dyes ◽  
Polarized Light ◽  
Processing System ◽  
Video Camera ◽  
Molecular Organization ◽  
Computer Assisted ◽  
Image Recording ◽  
Birefringent Crystal ◽  
Technological Advances

The recent renaissance of the light microsope is fueled in part by technological advances in components on the periphery of the microscope, such as the laser as illumination source, electronic image recording (video), computer assisted image analysis and the biochemistry of fluorescent dyes for labeling specimens. After great progress in these peripheral parts, it seems timely to examine the optics itself and ask how progress in the periphery facilitates the use of new optical components and of new optical designs inside the microscope. Some results of this fruitful reflection are presented in this symposium.We have considered the polarized light microscope, and developed a design that replaces the traditional compensator, typically a birefringent crystal plate, with a precision universal compensator made of two liquid crystal variable retarders. A video camera and digital image processing system provide fast measurements of specimen anisotropy (retardance magnitude and azimuth) at ALL POINTS of the image forming the field of view. The images document fine structural and molecular organization within a thin optical section of the specimen.

Thickness Measurement in the AEM by Macintosh-Based Analysis of Two-Beam Convergent Beam Patterns

1990 ◽  
Vol 48 (2) ◽  
pp. 504-505
Author(s):  
John F. Mansfield ◽  
Douglas C. Crawford
Keyword(s):  
Electron Microscope ◽  
Video Camera ◽  
Thickness Measurement ◽  
Specimen Thickness ◽  
Crystalline Materials ◽  
Beam Dynamic ◽  
Line Measurement ◽  
On Line ◽  
Image Position ◽  
Convergent Beam

A method has been developed that allows on-line measurement of the thickness of crystalline materials in the analytical electron microscope. Two-beam convergent beam electron diffraction (CBED) patterns are digitized from a JEOL 2000FX electron microscope into an Apple Macintosh II microcomputer via a Gatan #673 CCD Video Camera and an Imaging Systems Technology Video 1000 frame-capture board. It is necessary to know the lattice parameters of the sample since measurements are made of the spacing of the diffraction discs in order to calibrate the pattern. The sample thickness is calculated from measurements of the spacings of the fringes that are seen in the diffraction discs. This technique was pioneered by Kelly et al, who used the two-beam dynamic theory of MacGillavry relate the deviation parameter (Si) of the ith fringe from the exact Bragg condition to the specimen thickness (t) with the equation:Where ξg, is the extinction distance for that reflection and ni is an integer.

3-D reconstruction and analysis of mammalian mitotic spindle structure

1992 ◽  
Vol 50 (1) ◽  
pp. 578-579
Author(s):  
Kent McDonald ◽  
David Mastronarde ◽  
Rubai Ding ◽  
Eileen O'Toole ◽  
J. Richard McIntosh
Keyword(s):  
Cross Sections ◽  
Mitotic Spindle ◽  
Experimental Studies ◽  
Video Camera ◽  
Three Dimensions ◽  
Mitotic Spindles ◽  
Black And White ◽  
Reconstruction Methods ◽  
Spindle Structure ◽  
Tissue Culture Line

Mammalian spindles are generally large and may contain over a thousand microtubules (MTs). For this reason they are difficult to reconstruct in three dimensions and many researchers have chosen to study the smaller and simpler spindles of lower eukaryotes. Nevertheless, the mammalian spindle is used for many experimental studies and it would be useful to know its detailed structure.We have been using serial cross sections and computer reconstruction methods to analyze MT distributions in mitotic spindles of PtK cells, a mammalian tissue culture line. Images from EM negatives are digtized on a light box by a Dage MTI video camera containing a black and white Saticon tube. The signal is digitized by a Parallax 1280 graphics device in a MicroVax III computer. Microtubules are digitized at a magnification such that each is 10-12 pixels in diameter.

New polarized-light microscope for fast and orientation independent measurement of birefringent fine structure

1993 ◽  
Vol 51 ◽  
pp. 82-83
Author(s):  
Rudolf Oldenbourg
Keyword(s):  
Light Microscope ◽  
Polarized Light ◽  
Video Camera ◽  
Limited Range ◽  
Image Point ◽  
Computer Assisted ◽  
Optical Modulators ◽  
Anisotropic Structures ◽  
Long Time ◽  
Computer Assisted Image

The polarized light microscope has the unique potential to measure submicroscopic molecular arrangements dynamically and non-destructively in living cells and other specimens. With the traditional pol-scope, however, single images display only those anisotropic structures that have a limited range of orientations with respect to the polarization axes of the microscope. Furthermore, rapid measurements are restricted to a single image point or single area that exhibits uniform birefringence or other form of optical anisotropy, while measurements comparing several image points take an inordinately long time.We are developing a new kind of polarized light microscope which combines speed and high resolution in its measurement of the specimen anisotropy, irrespective of its orientation. The design of the new pol-scope is based on the traditional polarized light microscope with two essential modifications: circular polarizers replace linear polarizers and two electro-optical modulators replace the traditional compensator. A video camera and computer assisted image analysis provide measurements of specimen anisotropy in rapid succession for all points of the image comprising the field of view.

Computer-Assisted High-Re Solution TEM

1990 ◽  
Vol 48 (1) ◽  
pp. 162-163
Author(s):  
F.A. Ponce ◽  
H. Hikashi
Keyword(s):  
Signal To Noise Ratio ◽  
Accurate Determination ◽  
Computer Software ◽  
Video Camera ◽  
Image Contrast ◽  
Objective Lens ◽  
Computer Assisted ◽  
Optical Parameters ◽  
Astigmatism Correction

The determination of the atomic positions from HRTEM micrographs is only possible if the optical parameters are known to a certain accuracy, and reliable through-focus series are available to match the experimental images with calculated images of possible atomic models. The main limitation in interpreting images at the atomic level is the knowledge of the optical parameters such as beam alignment, astigmatism correction and defocus value. Under ordinary conditions, the uncertainty in these values is sufficiently large to prevent the accurate determination of the atomic positions. Therefore, in order to achieve the resolution power of the microscope (under 0.2nm) it is necessary to take extraordinary measures. The use of on line computers has been proposed [e.g.: 2-5] and used with certain amount of success.We have built a system that can perform operations in the range of one frame stored and analyzed per second. A schematic diagram of the system is shown in figure 1. A JEOL 4000EX microscope equipped with an external computer interface is directly linked to a SUN-3 computer. All electrical parameters in the microscope can be changed via this interface by the use of a set of commands. The image is received from a video camera. A commercial image processor improves the signal-to-noise ratio by recursively averaging with a time constant, usually set at 0.25 sec. The computer software is based on a multi-window system and is entirely mouse-driven. All operations can be performed by clicking the mouse on the appropiate windows and buttons. This capability leads to extreme friendliness, ease of operation, and high operator speeds. Image analysis can be done in various ways. Here, we have measured the image contrast and used it to optimize certain parameters. The system is designed to have instant access to: (a) x- and y- alignment coils, (b) x- and y- astigmatism correction coils, and (c) objective lens current. The algorithm is shown in figure 2. Figure 3 shows an example taken from a thin CdTe crystal. The image contrast is displayed for changing objective lens current (defocus value). The display is calibrated in angstroms. Images are stored on the disk and are accessible by clicking the data points in the graph. Some of the frame-store images are displayed in Fig. 4.

Video Graphics and High-Voltage Electron Microscopy For Analysis of Microtubule Distributions In Fixed Cells

1990 ◽  
Vol 48 (1) ◽  
pp. 524-525
Author(s):  
Richard Mcintosh ◽  
David Mastronarde ◽  
Kent McDonald ◽  
Rubai Ding
Keyword(s):  
Electron Microscopy ◽  
Cross Sections ◽  
Cell Shape ◽  
Video Camera ◽  
Computer Memory ◽  
High Voltage Electron Microscopy ◽  
Thin Sections ◽  
Voltage Electron ◽  
Morphogenetic Event ◽  
Set Of Points

Microtubules (MTs) are cytoplasmic polymers whose dynamics have an influence on cell shape and motility. MTs influence cell behavior both through their growth and disassembly and through the binding of enzymes to their surfaces. In either case, the positions of the MTs change over time as cells grow and develop. We are working on methods to determine where MTs are at different times during either the cell cycle or a morphogenetic event, using thin and thick sections for electron microscopy and computer graphics to model MT distributions.One approach is to track MTs through serial thin sections cut transverse to the MT axis. This work uses a video camera to digitize electron micrographs of cross sections through a MT system and create image files in computer memory. These are aligned and corrected for relative distortions by using the positions of 8 - 10 MTs on adjacent sections to define a general linear transformation that will align and warp adjacent images to an optimum fit. Two hundred MT images are then used to calculate an “average MT”, and this is cross-correlated with each micrograph in the serial set to locate points likely to correspond to MT centers. This set of points is refined through a discriminate analysis that explores each cross correlogram in the neighborhood of every point with a high correlation score.

Features of sanitary and hygienic characteristics of silvinite complexes

2020 ◽  
pp. 57-62
Author(s):  
E. Ryazanova ◽  
V. Barannikov ◽  
V. Khokhryakova ◽  
L. Kirichenko ◽  
S. Selivanova
Keyword(s):  
Video Camera ◽  
Treatment Center ◽  
Internal Environment ◽  
Radiation Background ◽  
Medical Environment ◽  
Light Levels ◽  
Salt Complex ◽  
Radio Equipment ◽  
Environment Noise ◽  
Medical University

Currently, medical technologies based on natural factors are widely used in practical health care, including the effect of the medicinal properties of the mineral silvinite (natural potassium salts of the Verkhnekamsk Deposit) on the patient’s body. However, there is no regulatory framework for sanitary control of such devices. The aim of the study was to develop methodological approaches to the hygienic assessment of silvinite complexes. The analysis of the current regulations used in carrying out hygienic supervision and preventive measures in the salt structures that are part of the silvinite complexes is carried out. Based on long-term hygienic studies of silvinite structures by the salt treatment Center of Perm medical University. academician E. A. Wagner together with LLC NPK «Medical climate» (Tchaikovsky) developed and implemented sanitary and hygienic requirements for the created salt complexes. It is a complex of structural divisions, including the place of stay and treatment of patients, as well as the salt device. All units must meet the requirements of current sanitary rules and regulations. It is necessary to conduct a thorough survey of the location of the future salt complex. Optimal conditions of the internal environment in silvinite structures are determined by a special air preparation system consisting of air conditioning and cleaning of the external air using a filter-saturator. The special hygienic requirements of the sylvinite furniture in the room, the decoration of walls, ceilings and floors. The room must be equipped with radio equipment and a video camera for monitoring patients. Full expanded hygienic control of the parameters of the medical environment of silvinite premises should be carried out at least once a year according to the following indicators: microclimate parameters, content of multicomponent fine salt aerosol, aeroionic composition of the air environment, radiation background, microbial contamination of the internal environment, noise and light levels. Thus, increasing the use of salt therapy requires further research to improve the sanitary and hygienic control of silvinite complexes.

Sign in / Sign up

Export Citation Format

Share Document