Date Palm as a Potential Candidate for Environmental Remediation

Author(s):  
Jaskiran Kaur
2018 ◽  
Vol 79 (5) ◽  
pp. 947-957 ◽  
Author(s):  
Mahabubur Chowdhury ◽  
Sarah Kapinga ◽  
Franscious Cummings ◽  
Veruscha Fester

Abstract Advanced oxidation processes based on sulphate radical generated by peroxymonosulphate (PMS) activation is a promising area for environmental remediation. One of the biggest drawbacks of heterogeneous PMS activation is catalyst instability and metal ion leaching. In this study, a simple organic binder mediated route was explored to substitute Ti4+ ions into the Co3O4 host lattice structure to create a Co-O-Ti bond to minimise cobalt leaching during methyl orange degradation. The catalyst was characterised by X-ray diffraction, and scanning and transmission electron microscopy. The as-prepared catalysts with Co3O4:TiO2 ratio of 70:30 exhibited minimal leaching (0.9 mg/L) compared to other ratios studied. However, the pristine Co3O4 exhibited highest catalytic activity (rate constant = 0.41 min−1) and leaching (26.7 mg/L) compared to composite material (70:30 Co3O4:TiO2). Interestingly, the morphology of the composite and leaching of Co2+ ions were found to be temperature dependent, as an optimum temperature ensured strong Co-O-Ti bond for prevention of Co2+ leaching. The classical quenching test was utilised to determine the presence and role of radical species on methyl orange degradation. The fabricated catalyst also exhibited good catalytic activity in degrading mixed dyes and good recyclability, making it a potential candidate for commercial application.


Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6553
Author(s):  
Emmanuel Galiwango ◽  
Ali H. Al-Marzuoqi ◽  
Abbas A. Khaleel ◽  
Mahdi M. Abu-Omar

Using the thermalgravimetric technique, we investigated the non-isothermal combustion kinetics of abundant and low-cost date palm wastes (leaflet, rachis, fibers, and their composite) as potential biomass energy sources. The kinetic and thermodynamic parameters were determined by Flynn–Wall–Ozawa (FWO), Kissinger–Akahila–Sunose (KAS), and Starink methods. Thermogravimetric analysis results showed a major peak for the degradation of volatiles between 127–138 °C with average percentage mass loss of 68.04 ± 1.5, 65.57 ± 0.6, 62.97 ± 5.5, and 59.26 ± 3.2, for rachis, composite, leaflet, and fibers, respectively. The FWO model showed the lowest activation energy, Eα, of 157 ± 25.6, 158 ± 25.7, 164 ± 40.1, and 169 ± 51.8 kJ mol−1 for the composite, rachis, leaflet, and fibers, respectively. The positive enthalpy values confirmed an endothermic pyrolysis reaction. For all models, a minimal difference of 4.40, 5.57, 6.55, and 7.51 kJ mol−1 between activation energy and enthalpy for rachis, fibers, composite, and leaflet ensued, respectively. The KAS model was best suited to describe chemical equilibrium with average ΔG values of 90.3 ± 28.8, 99.3 ± 34.9, 178.9 ± 27.3, and 186.5 ± 38.2 kJ mol−1 for rachis, fibers, composite, and leaflet, respectively. The reaction mechanism by the Malek and Popescu methods was ((g(α)=[−ln(1−α)]14) across the conversion range of 0.1–0.9 for all heating rates. The high energy content and volatile matter combined with low energy barriers make date palm waste a potential candidate in a biorefinery.


Materials ◽  
2019 ◽  
Vol 12 (10) ◽  
pp. 1589 ◽  
Author(s):  
Mazin Tahir ◽  
Abdul Samad Mohammed ◽  
Umar Azam Muhammad

The effect of various operational factors, such as sliding speed, normal load and temperature on the tribological properties of Date palm fruit syrup (DPFS) as an environmentally friendly lubricant, is investigated. Ball-on-disc wear tests are conducted on mild steel samples in the presence of DPFS as a lubricant under different conditions and the coefficient of friction and wear rate are measured. Scanning electron microscopy, stylus profilometry, and Fourier transform infrared spectroscopy are used to evaluate the wear tracks to determine the underlying wear mechanisms. Results showed that DPFS has excellent tribological properties in terms of low friction and low wear rates making it a potential candidate to be used as a lubricant in tribological applications.


Molecules ◽  
2020 ◽  
Vol 25 (8) ◽  
pp. 1900
Author(s):  
Abid Hussain ◽  
Ahmed Mohammed AlJabr

Date palm dust mites are important pests severely infesting valuable nutritious fruits (dates) of date palm. In search of an alternative to acaricides, joint action of Metarhizium anisopliae EBCL 02049 spores and 1-Chlorooctadecane was evaluated as a potential candidate for the management of Oligonychus afrasiaticus through natural products. In this regard, in vitro tests were performed to evaluate the interaction of M. anisopliae spores with multiple doses of 1-Chlorooctadecane (0.8, 1.6, 2.4, 3.2, and 4.0 mg/mL). Compatibility bioassay results evidenced from vegetative growth (77.7–84.40 mm), sporulation (5.50–7.30 × 106 spores/mL), and germination (96.70–98.20%), revealed that all the tested doses are compatible (biological index > 82) with the spores of M. anisopliae. The impact of combined treatment of spores with 1-Chlorooctadecane in different proportions (Scheme I, II, III, and IV) compared to their sole application against O. afrasiaticus was evaluated by concentration–mortality response bioassays. Results showed that all the combined treatments revealed high mortality compared to the sole application, which showed relatively slow mortality response over time. Toxicity recorded from Scheme IV combinations (80% 1-Chlorooctadecane: 20% Spores), exhibited strong synergistic interaction (joint toxicity = 713). Furthermore, potent interactions have overcome the host antioxidant defense at the final stage of infection by tremendously reducing catalase, and superoxide dismutase activities. These experiments demonstrated fungal–toxin joint synergistic interaction as a promising date palm dust mite management option.


Author(s):  
Jiaxiu Xiao ◽  
Xiaoting Zhang ◽  
Yaoyao Huang ◽  
Xiuling Luo ◽  
Xin Xiao

Background: The development of high-efficiency visible-light-active photocatalysts to eliminate emerging contaminants is of great significance for environmental remediation and personal safety. Methods: In this work, BiOBr and two oxygen-rich bismuth oxybromide (Bi4O5Br2-EG and Bi4O5Br2-H2O) were synthesized by solvothermal method through the reaction of Bi3+ and Br- in different reaction medium (ethylene glycol or water) and alkali conditions. The composition, structure, morphology, light absorption, surface area, and surface feature of the synthetic bismuth oxybromides were systematically characterized. Due to the presence of ethylene glycol and OH-, the Bi4O5Br2-EG preferentially exposes the 010 facets. The formation of hierarchical flower-like structures of Bi4O5Br2- EG can be elucidated by the dissolution-recrystallization-growth mechanism. The bismuth oxybromides were then used for photocatalytic degradation of methyl parahydroxybenzoate (a commonly used preservative but exposes endocrine disrupting activity) under visible-light irradiation. Results: Since Bi4O5Br2-EG has a satisfactory band structure (bandgap energy ~2.61 eV, valence band potential +2.45 V), high surface area (49.0 m2g-1), and negatively charged surface, its photocatalytic removal efficiency of MPHB is 46.5 and 41.2 times that of BiOBr and Bi4O5Br2-H2O, respectively. During the photodegradation reaction, holes and superoxide radicals were recognized as the key reactive oxide species. Conclusion: In addition, the as-synthesized Bi4O5Br2-EG is stable and easy to reuse, suggesting it is a potential candidate for wastewater treatment.


Author(s):  
T. A. Epicier ◽  
G. Thomas

Mullite is an aluminium-silicate mineral of current interest since it is a potential candidate for high temperature applications in the ceramic materials field.In the present work, conditions under which the structure of mullite can be optimally imaged by means of High Resolution Electron Microscopy (HREM) have been investigated. Special reference is made to the Atomic Resolution Microscope at Berkeley which allows real space information up to ≈ 0.17 nm to be directly transferred; numerous multislice calculations (conducted with the CEMPAS programs) as well as extensive experimental through-focus series taken from a commercial “3:2” mullite at 800 kV clearly show that a resolution of at least 0.19 nm is required if one wants to get a straightforward confirmation of atomic models of mullite, which is known to undergo non-stoichiometry associated with the presence of oxygen vacancies.Indeed the composition of mullite ranges from approximatively 3Al2O3-2SiO2 (referred here as 3:2-mullite) to 2Al2O3-1SiO2, and its structure is still the subject of refinements (see, for example, refs. 4, 5, 6).


2020 ◽  
Vol 48 (2) ◽  
pp. 399-409
Author(s):  
Baizhen Gao ◽  
Rushant Sabnis ◽  
Tommaso Costantini ◽  
Robert Jinkerson ◽  
Qing Sun

Microbial communities drive diverse processes that impact nearly everything on this planet, from global biogeochemical cycles to human health. Harnessing the power of these microorganisms could provide solutions to many of the challenges that face society. However, naturally occurring microbial communities are not optimized for anthropogenic use. An emerging area of research is focusing on engineering synthetic microbial communities to carry out predefined functions. Microbial community engineers are applying design principles like top-down and bottom-up approaches to create synthetic microbial communities having a myriad of real-life applications in health care, disease prevention, and environmental remediation. Multiple genetic engineering tools and delivery approaches can be used to ‘knock-in' new gene functions into microbial communities. A systematic study of the microbial interactions, community assembling principles, and engineering tools are necessary for us to understand the microbial community and to better utilize them. Continued analysis and effort are required to further the current and potential applications of synthetic microbial communities.


Sign in / Sign up

Export Citation Format

Share Document