scholarly journals The long-term X-ray lightcurve of RX J0527.8-6954

2007 ◽  
pp. 145-152 ◽  
Author(s):  
J. Greiner ◽  
R. Schwarz ◽  
G. Hasinger ◽  
M. Orio
Keyword(s):  
X Ray

Preparation And elemental analysis of ancient fibers

1987 ◽  
Vol 45 ◽  
pp. 410-411
Author(s):  
Allen Angel ◽  
Kathryn A. Jakes
Keyword(s):  
Cross Sections ◽  
Physical Structure ◽  
Energy Dispersive ◽  
Archaeological Sites ◽  
X Ray ◽  
Long Term Storage ◽  
Backscattered Electron ◽  
Electron Imaging

Fabrics recovered from archaeological sites often are so badly degraded that fiber identification based on physical morphology is difficult. Although diagenetic changes may be viewed as destructive to factors necessary for the discernment of fiber information, changes occurring during any stage of a fiber's lifetime leave a record within the fiber's chemical and physical structure. These alterations may offer valuable clues to understanding the conditions of the fiber's growth, fiber preparation and fabric processing technology and conditions of burial or long term storage (1).Energy dispersive spectrometry has been reported to be suitable for determination of mordant treatment on historic fibers (2,3) and has been used to characterize metal wrapping of combination yarns (4,5). In this study, a technique is developed which provides fractured cross sections of fibers for x-ray analysis and elemental mapping. In addition, backscattered electron imaging (BSI) and energy dispersive x-ray microanalysis (EDS) are utilized to correlate elements to their distribution in fibers.

Long-term variations in individual particle types in the aerosol of Phoenix, Arizona, as determined using automated electron microprobe analysis and multivariate statistical techniques

1993 ◽  
Vol 51 ◽  
pp. 742-743
Author(s):  
Karen A. Katrinak ◽  
James R. Anderson ◽  
Peter R. Buseck
Keyword(s):  
Electron Microprobe ◽  
Fine Fraction ◽  
Coarse Fraction ◽  
Motor Vehicles ◽  
Multivariate Statistical Methods ◽  
Multivariate Statistical ◽  
X Ray ◽  
Mineral Particles ◽  
Anthropogenic Air Pollutants

Aerosol samples were collected in Phoenix, Arizona on eleven dates between July 1989 and April 1990. Elemental compositions were determined for approximately 1000 particles per sample using an electron microprobe with an energy-dispersive x-ray spectrometer. Fine-fraction samples (particle cut size of 1 to 2 μm) were analyzed for each date; coarse-fraction samples were also analyzed for four of the dates.The data were reduced using multivariate statistical methods. Cluster analysis was first used to define 35 particle types. 81% of all fine-fraction particles and 84% of the coarse-fraction particles were assigned to these types, which include mineral, metal-rich, sulfur-rich, and salt categories. "Zero-count" particles, consisting entirely of elements lighter than Na, constitute an additional category and dominate the fine fraction, reflecting the importance of anthropogenic air pollutants such as those emitted by motor vehicles. Si- and Ca-rich mineral particles dominate the coarse fraction and are also numerous in the fine fraction.

Study of Natural Minerals of U-Ryrochlore-Type Structure as Analogues of Plutonium Ceramic Waste-form

2002 ◽  
Vol 713 ◽  
Author(s):  
Roman V. Bogdanov ◽  
Yuri F. Batrakov ◽  
Elena V. Puchkova ◽  
Andrey S. Sergeev ◽  
Boris E. Burakov
Keyword(s):  
Chemical Shifts ◽  
Pyrochlore Structure ◽  
Type Structure ◽  
Waste Form ◽  
X Ray ◽  
Ceramic Waste ◽  
Natural Minerals ◽  
The Us ◽  
Pyrochlore Type

ABSTRACTAt present, crystalline ceramic based on titanate pyrochlore, (Ca,Gd,Hf,Pu,U)2Ti2O7, is considered as the US candidate waste form for the immobilization of weapons grade plutonium. Naturally occuring U-bearing minerals with pyrochlore-type structure: hatchettolite, betafite, and ellsworthite, were studied in orders to understand long-term radiation damage effects in Pu ceramic waste forms. Chemical shifts (δ) of U(Lδ1)– and U(Lβ1) – X-ray emission lines were measured by X-ray spectrometry. Calculations were performed on the basis of a two-dimensional δLá1- and δLδ1- correlation diagram. It was shown that 100% of uranium in hatchettolite and, probably, 95-100% of uranium in betafite are in the form of (UO2)2+. formal calculation shows that in ellsworthite only 20% of uranium is in the form of U4+ and 80% of the rest is in the forms of U5+ and U6+. The conversion of the initial U4+ ion originally occurring in the pyrochlore structure of natural minerals to (UO2)2+ due to metamict decay causes a significant increase in uranium mobility.

Analysis of crystallite size changes in a hematite and magnetite formed on steel used in the power idustry

2017 ◽  
Vol 1 (21) ◽  
pp. 65-73
Author(s):  
Monika Gwoździk
Keyword(s):  
Elevated Temperature ◽  
Oxide Layer ◽  
Cross Section ◽  
X Ray ◽  
Term Operation ◽  
Diffraction Line Profile ◽  
Crystallite Sizes ◽  
Scherrer Formula ◽  
Pipe Outlet

The paper presents results of studies on the crystallite sizes of oxide layer formed during a long-term operation on 10CrMo9-10 steel at an elevated temperature (T = 545° C, t = 200,000 h). This value was determined by a method based on analysis of the diffraction line profile, according to a Scherrer formula. The oxide layer was studied on a surface and a cross-section at the outer and inner site on the pipe outlet, at the fire and counter-fire wall of the tube. X-ray studies were carried out on the surface of a tube, then the layer’s surface was polished and the diffraction measurements repeated to reveal differences in the originated oxides layer.

scholarly journals Enhancing carbonation and chloride resistance of autoclaved concrete by incorporating nano-CaCO3

2020 ◽  
Vol 9 (1) ◽  
pp. 998-1008
Author(s):  
Guo Li ◽  
Zheng Zhuang ◽  
Yajun Lv ◽  
Kejin Wang ◽  
David Hui
Keyword(s):  
Cement Hydration ◽  
Mercury Intrusion Porosimetry ◽  
Hardened Concrete ◽  
Optimal Dosage ◽  
Hydration Products ◽  
X Ray Diffraction ◽  
Carbonation Depth ◽  
X Ray ◽  
Chloride Resistance

AbstractThree nano-CaCO3 (NC) replacement levels of 1, 2, and 3% (by weight of cement) were utilized in autoclaved concrete. The accelerated carbonation depth and Coulomb electric fluxes of the hardened concrete were tested periodically at the ages of 28, 90, 180, and 300 days. In addition, X-ray diffraction, thermogravimetry, and mercury intrusion porosimetry were also performed to study changes in the hydration products of cement and microscopic pore structure of concrete under autoclave curing. Results indicated that a suitable level of NC replacement exerts filling and accelerating effects, promotes the generation of cement hydration products, reduces porosity, and refines the micropores of autoclaved concrete. These effects substantially enhanced the carbonation and chloride resistance of the autoclaved concrete and endowed the material with resistances approaching or exceeding that of standard cured concrete. Among the three NC replacement ratios, the 3% NC replacement was the optimal dosage for improving the long-term carbonation and chloride resistance of concrete.

scholarly journals The Effect of Long-Term Impact of Elevated Temperature on Changes in Microstructure and Mechanical Properties of HR3C Steel

2016 ◽  
Vol 61 (2) ◽  
pp. 761-766 ◽  
Author(s):  
A. Zieliński ◽  
M. Sroka ◽  
A. Hernas ◽  
M. Kremzer
Keyword(s):  
Mechanical Properties ◽  
Elevated Temperature ◽  
X Ray ◽  
Qualitative And Quantitative ◽  
Microstructure And Mechanical Properties ◽  
Transmission Electron ◽  
Quantitative Identification ◽  
Working Parameters ◽  
Long Term Impact

Abstract The HR3C is a new steel for pressure components used in the construction of boilers with supercritical working parameters. In the HR3C steel, due to adding Nb and N, the compounds such as MX, CrNbN and M23C6 precipitate during service at elevated temperature, resulting in changes in mechanical properties. This paper presents the results of microstructure investigations after ageing at 650, 700 and 750 °C for 5,000 h. The microstructure investigations were carried out using scanning and transmission electron microscopy. The qualitative and quantitative identification of the existing precipitates was carried out using X-ray analysis of phase composition. The effect elevated temperature on microstructure and mechanical properties of the examined steel was described.

scholarly journals ESA’s X-Ray Astronomy Mission, XMM

1990 ◽  
Vol 123 ◽  
pp. 129-140
Author(s):  
B.G. Taylor ◽  
A. Peacock
Keyword(s):  
Resolving Power ◽  
Science Program ◽  
Eccentric Orbit ◽  
Ccd Cameras ◽  
Optical Telescope ◽  
X Ray ◽  
Medium Resolution ◽  
Reflection Gratings ◽  
Better Than

AbstractESA’s X-ray Astronomy Mission, XMM, scheduled for launch in 1998, is the second of four cornerstones of ESA’s long term science program Horizon 2000. Covering the range from about 0.1 to 10 keV, it will provide a high throughput of 5000 cm2 at 7 keV with three independant telescopes, and have a spatial resolution better than 30 arcsec. Broadband spectrophotometry is provided by CCD cameras while reflection gratings provide medium resolution spectroscopy (resolving power of about 400) in the range 0.3–3 keV. Long uninterrupted observations will be made from the 24 hr period, highly eccentric orbit, reaching a sensitivity approaching 10−15 erg cm−2 s−1 in one orbit. A 30 cm UV/optical telescope is bore-sighted with the x-ray telescopes to provide simultaneous optical counterparts to the numerous serendipitous X-ray sources which will be detected during every observation.

scholarly journals Distribution of strontium and mineralization in iliac bone biopsies from osteoporotic women treated long-term with strontium ranelate

2011 ◽  
Vol 165 (3) ◽  
pp. 469-476 ◽  
Author(s):  
Audrey Doublier ◽  
Delphine Farlay ◽  
Mohamed T Khebbab ◽  
Xavier Jaurand ◽  
Pierre J Meunier ◽  
...  
Keyword(s):  
Bone Mineralization ◽  
Progressive Increase ◽  
Tissue Level ◽  
Term Treatment ◽  
Iliac Bone ◽  
X Ray ◽  
Long Term Treatment ◽  
Bone Biopsies

ObjectiveTo investigate interactions between strontium (Sr) and bone mineral and its effects on mineralization in osteoporotic women treated long-term with Sr ranelate (SrRan).DesignIn this study, 34 iliac bone biopsies were analyzed after 2, 12, 24, 36, 48, and 60 months of treatment with SrRan.MethodsSr global distribution was analyzed by X-ray cartography and the percentage of bone area containing Sr was calculated in the bone samples. The focal distribution of Sr in all bone samples was investigated by X-ray microanalysis. The degree of mineralization was assessed by quantitative microradiography.ResultsAbsent from old bone formed before the beginning of treatment, Sr was exclusively present in bone formed during this treatment with a much higher focal Sr content in new bone structural units than in old ones. A progressive increase in the extent of areas containing Sr was observed during treatment. The focal bone Sr content in recently formed bone was constant over treatment. Secondary mineralization was maintained at a normal level during treatment.ConclusionThus, the quality of bone mineralization (density and heterogeneity at tissue level) was preserved after a long-term treatment with SrRan.

Dissolution Characteristics and Morphology of Large-sized Scorodite Particles Synthesized from Fe(II) and As(V) in Aqueous Solution

2012 ◽  
Vol 31 (4-5) ◽  
pp. 451-458 ◽  
Author(s):  
S. Fujieda ◽  
K. Shinoda ◽  
T. Inanaga ◽  
M. Abumiya ◽  
S. Suzuki
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solution ◽  
Surface Defects ◽  
Atmospheric Temperature ◽  
Orthorhombic Structure ◽  
X Ray ◽  
Long Term Storage ◽  
Transmission Electron ◽  
Term Storage

AbstractA novel process for preparing scorodite particles with a diameter of approximately 20 µm from Fe(II) and As(V) in aqueous solution has been developed by DOWA Metals and Mining. In the present study, the dissolution characteristics of iron and arsenic from the scorodite particles synthesized by this process have been investigated under different conditions. The results show that the concentration of arsenic dissolved from the particles in aqueous solution is very low, but it has a complicated dependence on the temperature and pH of the solution. Transmission electron microscopy (TEM) with an energy dispersive X-ray spectrometer (EDS) was used to analyze the morphology, structure, and composition of the scorodite particles. The results indicate that the scorodite particles exhibit a nearly octahedral shape with planes composed of almost (111) planes in the orthorhombic structure. The concentration of iron at the surface of the particles is higher than that of iron inside of the particles. This characteristic morphology, along with the minimal surface defects of the scorodite particles, is considered to be responsible for the low dissolution of arsenic from the particles in aqueous solution. Atmospheric temperature and solution conditions were also found to be important for the safe, long-term storage of arsenic using scorodite particles.

scholarly journals Long-term X-ray variability of ultraluminous X-ray sources

2015 ◽  
Vol 454 (2) ◽  
pp. 1644-1657 ◽  
Author(s):  
Lupin Chun-Che Lin ◽  
Chin-Ping Hu ◽  
Albert K. H. Kong ◽  
David Chien-Chang Yen ◽  
Jumpei Takata ◽  
...  
Keyword(s):  
X Ray
Sign in / Sign up

Export Citation Format

Share Document