scholarly journals A study of Babylonian planetary theory III. The planet Mercury

Author(s):  
Teije de Jong

AbstractIn this series of papers I attempt to provide an answer to the question how the Babylonian scholars arrived at their mathematical theory of planetary motion. Papers I and II were devoted to system A theory of the outer planets and of the planet Venus. In this third and last paper I will study system A theory of the planet Mercury. Our knowledge of the Babylonian theory of Mercury is at present based on twelve Ephemerides and seven Procedure Texts. Three computational systems of Mercury are known, all of system A. System A1 is represented by nine Ephemerides covering the years 190 BC to 100 BC and system A2 by two Ephemerides covering the years 310 to 290 BC. System A3 is known from a Procedure Text and from Text M, an Ephemeris of the last evening visibility of Mercury for the years 424 to 403 BC. From an analysis of the Babylonian observations of Mercury preserved in the Astronomical Diaries and Planetary Texts we find: (1) that dates on which Mercury reaches its stationary points are not recorded, (2) that Normal Star observations on or near dates of first and last appearance of Mercury are rare (about once every twenty observations), and (3) that about one out of every seven pairs of first and last appearances is recorded as “omitted” when Mercury remains invisible due to a combination of the low inclination of its orbit to the horizon and the attenuation by atmospheric extinction. To be able to study the way in which the Babylonian scholars constructed their system A models of Mercury from the available observational material I have created a database of synthetic observations by computing the dates and zodiacal longitudes of all first and last appearances and of all stationary points of Mercury in Babylon between 450 and 50 BC. Of the data required for the construction of an ephemeris synodic time intervals Δt can be directly derived from observed dates but zodiacal longitudes and synodic arcs Δλ must be determined in some other way. Because for Mercury positions with respect to Normal Stars can only rarely be determined at its first or last appearance I propose that the Babylonian scholars used the relation Δλ = Δt −3;39,40, which follows from the period relations, to compute synodic arcs of Mercury from the observed synodic time intervals. An additional difficulty in the construction of System A step functions is that most amplitudes are larger than the associated zone lengths so that in the computation of the longitudes of the synodic phases of Mercury quite often two zone boundaries are crossed. This complication makes it difficult to understand how the Babylonian scholars managed to construct System A models for Mercury that fitted the observations so well because it requires an excessive amount of computational effort to find the best possible step function in a complicated trial and error fitting process with four or five free parameters. To circumvent this difficulty I propose that the Babylonian scholars used an alternative more direct method to fit System A-type models to the observational data of Mercury. This alternative method is based on the fact that after three synodic intervals Mercury returns to a position in the sky which is on average only 17.4° less in longitude. Using reduced amplitudes of about 14°–25° but keeping the same zone boundaries, the computation of what I will call 3-synarc system A models of Mercury is significantly simplified. A full ephemeris of a synodic phase of Mercury can then be composed by combining three columns of longitudes computed with 3-synarc step functions, each column starting with a longitude of Mercury one synodic event apart. Confirmation that this method was indeed used by the Babylonian astronomers comes from Text M (BM 36551+), a very early ephemeris of the last appearances in the evening of Mercury from 424 to 403 BC, computed in three columns according to System A3. Based on an analysis of Text M I suggest that around 400 BC the initial approach in system A modelling of Mercury may have been directed towards choosing “nice” sexagesimal numbers for the amplitudes of the system A step functions while in the later final models, dating from around 300 BC onwards, more emphasis was put on selecting numerical values for the amplitudes such that they were related by simple ratios. The fact that different ephemeris periods were used for each of the four synodic phases of Mercury in the later models may be related to the selection of a best fitting set of System A step function amplitudes for each synodic phase.

2003 ◽  
Vol 125 (4) ◽  
pp. 234-241 ◽  
Author(s):  
Vincent Y. Blouin ◽  
Michael M. Bernitsas ◽  
Denby Morrison

In structural redesign (inverse design), selection of the number and type of performance constraints is a major challenge. This issue is directly related to the computational effort and, most importantly, to the success of the optimization solver in finding a solution. These issues are the focus of this paper, which provides and discusses techniques that can help designers formulate a well-posed integrated complex redesign problem. LargE Admissible Perturbations (LEAP) is a general methodology, which solves redesign problems of complex structures with, among others, free vibration, static deformation, and forced response amplitude constraints. The existing algorithm, referred to as the Incremental Method is improved in this paper for problems with static and forced response amplitude constraints. This new algorithm, referred to as the Direct Method, offers comparable level of accuracy for less computational time and provides robustness in solving large-scale redesign problems in the presence of damping, nonstructural mass, and fluid-structure interaction effects. Common redesign problems include several natural frequency constraints and forced response amplitude constraints at various frequencies of excitation. Several locations on the structure and degrees of freedom can be constrained simultaneously. The designer must exercise judgment and physical intuition to limit the number of constraints and consequently the computational time. Strategies and guidelines are discussed. Such techniques are presented and applied to a 2,694 degree of freedom offshore tower.


2012 ◽  
Vol 2012 (HITEC) ◽  
pp. 000301-000306 ◽  
Author(s):  
Michael C. Brown

Full computational systems are needed at extreme environments (to 300°C) to increase functionality and reduce cost in the ever advancing oil/gas, geothermal, aeronautic, and automotive industries. Commercially available electronic components are not available to build a reliable system. A single microcontroller device can be used in systems of varying complexity, from small, mid, large, and multiprocessor scale. The 32-bit microcontroller will use a low power silicon-on-insulator CMOS process to increase long term reliability. Communication ports are provided to allow for simple systems with a single processor to complex multiprocessor systems with multiple controlled devices and external memory. As no adequate non-volatile solution is available for extreme conditions, multiple boot options are available to load instructions from external sources. Fault tolerance should be provided by system error detection. Battery backup must be provided for program and data retention. The resulting microcontroller will allow a wide variety of extreme environment systems, from simple to complex.


Author(s):  
S. F. Lukomskii ◽  
G. S. Berdnikov

We consider a class of (N, M)-elementary step functions on the p-adic Vilenkin group. We prove that (N, M)-elementary step function generates a MRA on p-adic Vilenkin group if and only if it is generated by a special N-valid rooted tree on the set of vertices {0,1,…p - 1} with the vector (0,…,0) ∈ ℤN as a root.


2015 ◽  
Vol 2015 ◽  
pp. 1-5
Author(s):  
Ping Zhou ◽  
Rongji Bai ◽  
Hao Cai

Based on an integer-order Brushless DC motors (IO-BLDCM) system, we give a fractional-order Brushless DC motors (FO-BLDCM) system in this paper. There exists a chaotic attractor for fractional-order0.95<q≤1in the FO-BLDCM system. Furthermore, using the Lyapunov direct method for fractional-order system, a control scheme is proposed to stabilize the FO-BLDCM chaotic system in the sense of Lyapunov. Numerical simulation shows that the control scheme in this paper is valid for the FO-BLDCM chaotic system.


1975 ◽  
Vol 69 (3) ◽  
pp. 859-870 ◽  
Author(s):  
Patrick J. McGowan ◽  
Robert M. Rood

This paper is a partial systematic test of Morton A. Kaplan's “theory” of alliance behavior in balance of power international systems first proposed in his well-known System and Process in International Politics (1957). Three hypotheses are inferred from Kaplan's writings predicting that in a stable balance of power system, (a) alliances will occur randomly with respect to time; (b) the time intervals between alliances will also be randomly distributed; and (c) a decline in systemic alliance formation rates precedes system changing events, such as general war. We check these hypotheses by applying probability theory, specifically a Poisson model, to the analysis of new data on fifty-five alliances among the five major European powers during the period 1814–1914. Because our research questions are so general, our findings should not be regarded as definitive; however, the data very strongly support our hypotheses. We conclude that Kaplan's verbal model of a balance of power international system has had its credibility enhanced as a result of this paper.


2020 ◽  
Vol 24 (23) ◽  
pp. 17589-17600 ◽  
Author(s):  
Pierluigi Amodio ◽  
Luigi Brugnano ◽  
Felice Iavernaro ◽  
Francesca Mazzia

AbstractWe devise a variable precision floating-point arithmetic by exploiting the framework provided by the Infinity Computer. This is a computational platform implementing the Infinity Arithmetic system, a positional numeral system which can handle both infinite and infinitesimal quantities expressed using the positive and negative finite or infinite powers of the radix $${\textcircled {1}}$$ 1 . The computational features offered by the Infinity Computer allow us to dynamically change the accuracy of representation and floating-point operations during the flow of a computation. When suitably implemented, this possibility turns out to be particularly advantageous when solving ill-conditioned problems. In fact, compared with a standard multi-precision arithmetic, here the accuracy is improved only when needed, thus not affecting that much the overall computational effort. An illustrative example about the solution of a nonlinear equation is also presented.


1992 ◽  
Vol 152 ◽  
pp. 25-32 ◽  
Author(s):  
Gerald D. Quinlan

We have integrated the motion of the four Jovian planets on Myr timescales in fictitious solar systems in which the orbits differ from those of the real solar system. A change of ≲1% in the major axis of any one of the planets from its real value can lead to chaotic motion with a Lyapunov exponent larger than 10-5 yr−1. A survey of fifty solar systems with initial conditions chosen at random from a reasonable probability distribution shows the majority of them to be chaotic.


1995 ◽  
Vol 03 (02) ◽  
pp. 569-577 ◽  
Author(s):  
ERIK PLAHTE ◽  
THOMAS MESTL ◽  
STIG W. OMHOLT

A new method for analysing stationary states in complex differential equation systems when the interaction terms contain sigmoid functions is presented. Originally aimed at simplifying the analysis of certain gene regulatory networks, the method is applicable to models comprising a wide range of sigmoid functions. The basic idea is to analyse the limiting case when the sigmoids approach the step function, and consider sigmoids with finite steepness as a perturbation. After a brief presentation the method is applied to a model for a herbivore feeding on two competing autotrophs. Analytical expresssions for the stationary points in the step function limit are given, and their dependence on the parameter values is analysed and interpreted.


2007 ◽  
Vol 2 (1) ◽  
Author(s):  
Davide Manca

The manuscript is focused on the optimization of a batch distillation column that is actually formulated in terms of control problem. The final objective is finding the optimal time-dependent reflux profile. In order to fulfill the call for simplicity and functionality from the industries, the reflux profile was approximated by means of a piece-wise function with three time intervals. A first-principles model, derived from the literature, proved to be a good trade-off between computational effort and accuracy. The capacity factor (CAP), defined as the on-specification products produced per time unit, is the performance index that must be maximized. The optimization problem was solved by a specifically modified Simplex method that demonstrated a good behavior in case of discontinuous objective function. Finally, a graphical analysis of the capacity factor was performed to show the irregularities of such a function.


Robotica ◽  
1984 ◽  
Vol 2 (3) ◽  
pp. 161-167 ◽  
Author(s):  
Ajit M. Karnik ◽  
Naresh K. Sinha

SUMMARYThe increased demand on the performance and efficiency of industrial robots, has led to the design of sophisticated control systems. Such control systems require an accurate dynamic model of the system. A commonly used method of modeling an industrial robot, involves the description of a set of dynamic equations, relating actuator torques to loads and accelerations. These equations are generally quite complex and inconvenient for implementation on digital computers.Another method often used for identification, is the ‘indirect method’, in which the transfer function is obtained in two steps. The discrete time model is first derived from samples of the input and output measurements, which is then transformed to the continuous-time model. A limitation of this method is that it requires the excitation to be of the ‘persistently exciting’ type, thus precluding the application of simple inputs like the step signal.This paper describes a ‘direct’ method for identification of an ‘industrial robot’ from samples of input and output observations. Results of modeling an industrial robot and two simulations are presented. One of the simulations, and the industrial robot uses the step input as excitation. The other example was excited with an exponential input.


Sign in / Sign up

Export Citation Format

Share Document