scholarly journals Novel 500-GHz Band Waveguide Stepped Septum-Type Circular Polarizer with a New High-Accuracy and Very Small Waveguide Flange

2020 ◽  
Author(s):  
Yutaka Hasegawa ◽  
Hiroyuki Maezawa ◽  
Hideo Ogawa
Keyword(s):  
High Performance ◽  
High Accuracy ◽  
Circular Polarizer ◽  
New Methods ◽  
Position Errors ◽  
Surface Flatness ◽  
Atmospheric Observations ◽  
Dimensional Errors ◽  
Determination Mechanism ◽  
Better Than

Abstract A new waveguide stepped septum-type circular polarizer (SST-CP) was developed to operate in the 500-GHz band for radio astronomical and planetary atmospheric observations. In a previous study, we developed a practical SST-CP for the 230-GHz band. However, several issues prevent this device being easily scaled down to the 500-GHz band, such as manufacturing dimensional errors and waveguide flange position errors. In this study, we developed a new waveguide flange with a high-accuracy position determination mechanism and a very small size of 10 × 10 mm. We also developed a new fabrication technique to obtain very good flatness for the device’s blank materials by high-accuracy polishing using a resin fixture. Using these new methods, the manufactured 500-GHz band SST-CP achieved a cross-polarization talk level of better than – 30 dB at 465–505 GHz, a device surface flatness of within 3 μm, and also the horizontal positioning error of ± 3 μm. These results indicate that the developed 500-GHz band SST-CP has high performance in the high-frequency band, and thus the new manufacturing methods are effective in the 500-GHz band.

Advances in imaging SIMS studies of stained and BrdU-labelled human metaphase chromosomes

1995 ◽  
Vol 53 ◽  
pp. 932-933
Author(s):  
R. Levi-Setti ◽  
J. M. Chabala ◽  
R. Espinosa ◽  
M. M. Le Beau
Keyword(s):  
High Performance ◽  
Secondary Ion Mass Spectrometry ◽  
Analytical Sensitivity ◽  
Metaphase Chromosomes ◽  
Banding Patterns ◽  
Sector Mass Spectrometer ◽  
Staining Methods ◽  
The University ◽  
Secondary Ion ◽  
Better Than

We have shown previously that isotope-labelled nucleotides in human metaphase chromosomes can be detected and mapped by imaging secondary ion mass spectrometry (SIMS), using the University of Chicago high resolution scanning ion microprobe (UC SIM). These early studies, conducted with BrdU- and 14C-thymidine-labelled chromosomes via detection of the Br and 28CN- (14C14N-> labelcarrying signals, provided some evidence for the condensation of the label into banding patterns along the chromatids (SIMS bands) reminiscent of the well known Q- and G-bands obtained by conventional staining methods for optical microscopy. The potential of this technique has been greatly enhanced by the recent upgrade of the UC SIM, now coupled to a high performance magnetic sector mass spectrometer in lieu of the previous RF quadrupole mass filter. The high transmission of the new spectrometer improves the SIMS analytical sensitivity of the microprobe better than a hundredfold, overcoming most of the previous imaging limitations resulting from low count statistics.

A Design of High-Accuracy Displacement Measurement Instrument from Principles of Optics

2012 ◽  
Vol 170-173 ◽  
pp. 2924-2928
Author(s):  
Sheng Biao Chen ◽  
Yun Zhi Tan
Keyword(s):  
Measurement Instrument ◽  
High Accuracy ◽  
Mechanical Tests ◽  
Total Reflection ◽  
Displacement Measurement ◽  
New Method ◽  
Water Volume ◽  
Water Drainage ◽  
Accuracy Of Measurement ◽  
Better Than

In order to measure the water drainage volume in soil mechanical tests accurately, it develop a new method which is based on principles of optics. And from both physical and mathematic aspects, it deduces the mathematic relationship between micro change in displacement and the increment projected on screen. The result shows that total reflection condition is better than refraction condition. What’s more, the screen could show the water volume micro variation clearly, so it can improve the accuracy of measurement.

scholarly journals Performance of Seven Consumer Sleep-Tracking Devices Compared with Polysomnography

SLEEP ◽  
2020 ◽  
Author(s):  
Evan D Chinoy ◽  
Joseph A Cuellar ◽  
Kirbie E Huwa ◽  
Jason T Jameson ◽  
Catherine H Watson ◽  
...  
Keyword(s):  
Performance Measures ◽  
Gold Standard ◽  
High Performance ◽  
Sleep Stage ◽  
Sleep Laboratory ◽  
Sleep Assessment ◽  
Sleep Condition ◽  
Different Populations ◽  
Tracking Devices ◽  
Better Than

Abstract Study Objectives Consumer sleep-tracking devices are widely used and becoming more technologically advanced, creating strong interest from researchers and clinicians for their possible use as alternatives to standard actigraphy. We therefore tested the performance of many of the latest consumer sleep-tracking devices, alongside actigraphy, versus the gold-standard sleep assessment technique, polysomnography (PSG). Methods In total, 34 healthy young adults (22 women; 28.1 ± 3.9 years, mean ± SD) were tested on three consecutive nights (including a disrupted sleep condition) in a sleep laboratory with PSG, along with actigraphy (Philips Respironics Actiwatch 2) and a subset of consumer sleep-tracking devices. Altogether, four wearable (Fatigue Science Readiband, Fitbit Alta HR, Garmin Fenix 5S, Garmin Vivosmart 3) and three non-wearable (EarlySense Live, ResMed S+, SleepScore Max) devices were tested. Sleep/wake summary and epoch-by-epoch agreement measures were compared with PSG. Results Most devices (Fatigue Science Readiband, Fitbit Alta HR, EarlySense Live, ResMed S+, SleepScore Max) performed as well as or better than actigraphy on sleep/wake performance measures, while the Garmin devices performed worse. Overall, epoch-by-epoch sensitivity was high (all ≥0.93), specificity was low-to-medium (0.18-0.54), sleep stage comparisons were mixed, and devices tended to perform worse on nights with poorer/disrupted sleep. Conclusions Consumer sleep-tracking devices exhibited high performance in detecting sleep, and most performed equivalent to (or better than) actigraphy in detecting wake. Device sleep stage assessments were inconsistent. Findings indicate that many newer sleep-tracking devices demonstrate promising performance for tracking sleep and wake. Devices should be tested in different populations and settings to further examine their wider validity and utility.

scholarly journals Temperature Prediction of PMSMs Using Pseudo-Siamese Nested LSTM

2021 ◽  
Vol 12 (2) ◽  
pp. 57
Author(s):  
Yongping Cai ◽  
Yuefeng Cen ◽  
Gang Cen ◽  
Xiaomin Yao ◽  
Cheng Zhao ◽  
...  
Keyword(s):  
Electric Vehicles ◽  
Simple Structure ◽  
High Accuracy ◽  
Stator Winding ◽  
High Power Density ◽  
Temperature Prediction ◽  
Permanent Magnet Synchronous Motors ◽  
Training Performance ◽  
Synchronous Motors ◽  
Better Than

Permanent Magnet Synchronous Motors (PMSMs) are widely used in electric vehicles due to their simple structure, small size, and high power-density. The research on the temperature monitoring of the PMSMs, which is one of the critical technologies to ensure the operation of PMSMs, has been the focus. A Pseudo-Siamese Nested LSTM (PSNLSTM) model is proposed to predict the temperature of the PMSMs. It takes the features closely related to the temperature of PMSMs as input and realizes the temperature prediction of stator yoke, stator tooth, and stator winding. An optimization algorithm of learning rate combined with gradual warmup and decay is proposed to accelerate the convergence during the training and improve the training performance of the model. Experimental results reveal the proposed method and Nested LSTM (NLSTM) achieves high accuracy by comparing with other intelligent prediction methods. Moreover, the proposed method is slightly better than NLSTM in temperature prediction of PMSMS.

scholarly journals A high-fidelity realization of the Euclid code comparison N-body simulation with Abacus

2019 ◽  
Vol 485 (3) ◽  
pp. 3370-3377 ◽  
Author(s):  
Lehman H Garrison ◽  
Daniel J Eisenstein ◽  
Philip A Pinto
Keyword(s):  
Power Spectrum ◽  
High Performance ◽  
High Fidelity ◽  
Step Size ◽  
Time Step ◽  
Code Comparison ◽  
Force Accuracy ◽  
Integration Errors ◽  
Better Than ◽  
Good Agreement

Abstract We present a high-fidelity realization of the cosmological N-body simulation from the Schneider et al. code comparison project. The simulation was performed with our AbacusN-body code, which offers high-force accuracy, high performance, and minimal particle integration errors. The simulation consists of 20483 particles in a $500\ h^{-1}\, \mathrm{Mpc}$ box for a particle mass of $1.2\times 10^9\ h^{-1}\, \mathrm{M}_\odot$ with $10\ h^{-1}\, \mathrm{kpc}$ spline softening. Abacus executed 1052 global time-steps to z = 0 in 107 h on one dual-Xeon, dual-GPU node, for a mean rate of 23 million particles per second per step. We find Abacus is in good agreement with Ramses and Pkdgrav3 and less so with Gadget3. We validate our choice of time-step by halving the step size and find sub-percent differences in the power spectrum and 2PCF at nearly all measured scales, with ${\lt }0.3{{\ \rm per\ cent}}$ errors at $k\lt 10\ \mathrm{Mpc}^{-1}\, h$. On large scales, Abacus reproduces linear theory better than 0.01 per cent. Simulation snapshots are available at http://nbody.rc.fas.harvard.edu/public/S2016.

Copper Ulsi Interconnect Technology

1998 ◽  
Vol 514 ◽  
Author(s):  
D. Edelstein
Keyword(s):  
High Performance ◽  
Stress Testing ◽  
Cmos Technology ◽  
Functional Verification ◽  
Functional Modules ◽  
Mos Devices ◽  
Potential Problems ◽  
Cu Contamination ◽  
Interconnect Technology ◽  
Better Than

ABSTRACTRecently IBM announced the first implementation of full copper ULSI wiring in a CMOS technology, to be manufactured on its high-performance 0.22 um CMOS products this year. Features of this technology will be presented, as well as functional verification on CMOS chips. To reach this level, extensive yield, reliability, and stress testing had to be done on test and product-like chips, including those packaged into product modules. Data will be presented fom all aspects of this testing, ranging from experiments designed to promote Cu contamination of the MOS devices, to temperature/humidity/bias stressing of assembled functional modules. The results in all areas are shown to be equal to or better than standards set by our current AI(Cu)/Wstud technology. This demonstrates that the potential problems associated with copper wiring that have long been discussed can be overcome.

scholarly journals PHEMTO: the polarimetric high energy modular telescope observatory

2021 ◽  
Author(s):  
P. Laurent ◽  
F. Acero ◽  
V. Beckmann ◽  
S. Brandt ◽  
F. Cangemi ◽  
...  
Keyword(s):  
Black Holes ◽  
Energy Range ◽  
High Performance ◽  
Angular Resolution ◽  
High Energy ◽  
Thermal Processes ◽  
Scientific Performance ◽  
X Ray ◽  
Measurement Capability ◽  
Better Than

AbstractBased upon dual focusing techniques, the Polarimetric High-Energy Modular Telescope Observatory (PHEMTO) is designed to have performance several orders of magnitude better than the present hard X-ray instruments, in the 1–600 keV energy range. This, together with its angular resolution of around one arcsecond, and its sensitive polarimetry measurement capability, will give PHEMTO the improvements in scientific performance needed for a mission in the 2050 era in order to study AGN, galactic black holes, neutrons stars, and supernovae. In addition, its high performance will enable the study of the non-thermal processes in galaxy clusters with an unprecedented accuracy.

Optimal Data-Driven Modeling-Free Differential-Inversion-Based Iterative Control: A Wafer Stage Example

2020 ◽  
Author(s):  
Zezhou Zhang ◽  
Qingze Zou
Keyword(s):  
System Dynamics ◽  
High Performance ◽  
Random Noise ◽  
High Accuracy ◽  
Data Driven ◽  
Modeling Process ◽  
Random Disturbances ◽  
Noise Disturbances ◽  
Data Driven Modeling ◽  
Iterative Control

Abstract In this paper, an optimal data-driven modeling-free differential-inversion-based iterative control (OMFDIIC) method is proposed for both high performance and robustness in the presence of random disturbances. Achieving high accuracy and fast convergence is challenging as the system dynamics behaviors vary due to the external uncertainties and the system bandwidth is limited. The aim of the proposed method is to compensate for the dynamics effect without modeling process and achieve both high accuracy and robust convergence, by extending the existed modeling-free differential-inversion-based iterative control (MFDIIC) method through a frequency- and iteration-dependent gain. The convergence of the OMFDIIC method is analyzed with random noise/disturbances considered. The developed method is applied to a wafer stage, and shows a significant improvement in the performance.

Sign in / Sign up

Export Citation Format

Share Document