scholarly journals Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

2021 ◽  
Author(s):  
Ahmad Safwan Ismail ◽  
Mohammad Jawaid ◽  
Norul Hisham Hamid ◽  
Ridwan Yahaya ◽  
Azman Hassan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polymer Blends ◽  
Epoxy Polymer ◽  
Curing Temperature

scholarly journals Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 773
Author(s):  
Ahmad Safwan Ismail ◽  
Mohammad Jawaid ◽  
Norul Hisham Hamid ◽  
Ridwan Yahaya ◽  
Azman Hassan
Keyword(s):  
Mechanical Properties ◽  
Phase Separation ◽  
Polymer Blends ◽  
Epoxy Polymer ◽  
Flexural Modulus ◽  
Polymeric Materials ◽  
Morphological Properties ◽  
Comparison Results ◽  
Unique Material ◽  
Different Types

Polymer blends is a well-established and suitable method to produced new polymeric materials as compared to synthesis of a new polymer. The combination of two different types of polymers will produce a new and unique material, which has the attribute of both polymers. The aim of this work is to analyze mechanical and morphological properties of bio-phenolic/epoxy polymer blends to find the best formulation for future study. Bio-phenolic/epoxy polymer blends were fabricated using the hand lay-up method at different loading of bio-phenolic (5 wt%, 10 wt%, 15 wt%, 20 wt%, and 25 wt%) in the epoxy matrix whereas neat bio-phenolic and epoxy samples were also fabricated for comparison. Results indicated that mechanical properties were improved for bio-phenolic/epoxy polymer blends compared to neat epoxy and phenolic. In addition, there is no sign of phase separation in polymer blends. The highest tensile, flexural, and impact strength was shown by P-20(biophenolic-20 wt% and Epoxy-80 wt%) whereas P-25 (biophenolic-25 wt% and Epoxy-75 wt%) has the highest tensile and flexural modulus. Based on the finding, it is concluded that P-20 shows better overall mechanical properties among the polymer blends. Based on this finding, the bio-phenolic/epoxy blend with 20 wt% will be used for further study on flax-reinforced bio-phenolic/epoxy polymer blends.

Microstructure and mechanical properties of aminated polystyrene spheres/epoxy polymer blends

2014 ◽  
Vol 66 ◽  
pp. 58-64 ◽  
Author(s):  
Tao Sun ◽  
Zhanjun Wu ◽  
Qin Zhuo ◽  
Xin Liu ◽  
Zhi Wang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polymer Blends ◽  
Epoxy Polymer ◽  
Polystyrene Spheres ◽  
Microstructure And Mechanical Properties

Structure and mechanical properties of heterogeneous polymer blends

1995 ◽  
Vol 55 (10) ◽  
pp. 1375-1383 ◽  
Author(s):  
M. Kozlowski
Keyword(s):  
Mechanical Properties ◽  
Polymer Blends ◽  
Heterogeneous Polymer

Dynamic Mechanical Analysis of Bio-Based and Synthetic Petroleum Based Polymer Foams with Powder Type Organic Filler at Prolonged Ultra-Violet Exposure

2020 ◽  
Vol 01 (01) ◽  
Author(s):  
M A Zulhakimie ◽  
◽  
Anika Zafiah M. Rus ◽  
N S S Sulong ◽  
A Syah Z A ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Epoxy Polymer ◽  
Loss Modulus ◽  
Ultra Violet ◽  
Mechanical Analysis ◽  
Uv Exposure ◽  
Polymer Foams ◽  
Polymer Foam ◽  
Powder Filler ◽  
Tan Δ

Wood powder filler applied to the bio-based and epoxy polymer foams has the potential to reinforce the polymer foam structure. The 'Meranti' wood filler type was used as the filler in this analysis. In order to observe the pore size of each sample when exposed to different hours of UV exposure using optical microscopy (OM), this study was made.This analysis was conducted to compare the mechanical properties of each sample with different filler ratios of 0 wt%, 5 wt%, 10 wt%, 15wt% and 20 wt% at different UV exposure hours, which is 0 hour to 6000 hours with a 2000 hour rapid increase. Using the DMA Q800 TA unit, the mechanical properties were studied. In order to obtain the product of their mechanical properties, samples having a scale of 40 x 10 x 5 mm were clamped into the machine. The results will show the value of tan δ, loss modulus and storage modulus from the DMA test.The tan δ value shows that the high tanδvalue will be produced by the higher ratio filler. In contrast to bio-based polymer foams, epoxy polymer foams with powder fillers have the highest tan δ value. It shows that the higher filler ratio can be reported with the lower tan δ value. As the filler ratio filler in the polymer foams increased, the consequence of storage and loss modulus was found to increase. The greater the modulus of loss and the modulus of storage, the lower the temperature. As energy is lost as heat during UV irradiation exposure, bio-based polymer foams with a high powder filler ratio can dissipate more energy.

scholarly journals Study of clay minerals effect on curing characteristics of polymer blends and physical-mechanical properties of prepared vulcanizates

2018 ◽  
Vol 157 ◽  
pp. 07010
Author(s):  
Beáta Pecušová ◽  
Mariana Pajtášová ◽  
Zuzana Mičicová ◽  
Darina Ondrušová ◽  
Andrea Feriancová ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Polymer Blends ◽  
Clay Minerals ◽  
Structural Type ◽  
Partial Replacement ◽  
Curing Characteristics ◽  
Dioctahedral Smectite ◽  
The Common ◽  
The Given

The given paper deals with the study of the properties of clay minerals, namely montmorillonite and moreover, it is focused on effect of these clay minerals on the curing characteristics of the polymer blends and the physical-mechanical properties of prepared vulcanizates. Montmorillonite is a major clay mineral which has a wide application in many industrial branches. It belongs to the group of dioctahedral smectite minerals with structural type in the ratio of 2:1. Characteristics of prepared modified and organomodified clay minerals are based on sulphur vulcanisation accelerators which are used for the preparation of real polymer blend where they represent a partial replacement of the common carbon black filler and then, the effect on the curing characteristics of polymer blends as well as physical-mechanical properties of the prepared vulcanizates are investigated. The results exhibit that the clay-based filler (modified and organomodified clay minerals) can be used as a partial replacement while the quality of the prepared blends is preserved.

Image analysis and the finite element method in the characterization of the influence of porosity parameters on the mechanical properties of porous EVA/PMMA polymer blends

2019 ◽  
Vol 129 ◽  
pp. 1-14 ◽  
Author(s):  
Nataša Z. Tomić ◽  
Predrag Milanović ◽  
Bojan Međo ◽  
Marija M. Vuksanović ◽  
Đorđe Veljović ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Finite Element Method ◽  
Finite Element ◽  
Image Analysis ◽  
Polymer Blends ◽  
The Finite Element Method ◽  
Pmma Polymer ◽  
Element Method

scholarly journals A Study on the Mechanical Properties for Ternary Polymer Blends

2017 ◽  
Vol 6 (3) ◽  
pp. 27
Author(s):  
Awham M. Hameed
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Polymer Blends ◽  
Hardness Test ◽  
Flexural Behavior ◽  
Ternary Blend ◽  
Mixing Ratios ◽  
Hardness Tests ◽  
Ternary Polymer

In this work, two ternary polymer blends were prepared by mixing EP with (UP/PSR) and (PVC/PSR) respectively. Different mixing ratios were used (5, 10, 15 and 20) wt.% of the added polymers. Impact, tensile, compression, flexural and hardness tests were performed on the prepared blends. The results of testing showed that the first ternary blend A (EP/UP/PSR) records tensile strength values higher than that of the second ternary blend B (EP/ PVC/PSR). At 20wt.% of mixing, the blend B records higher impact strength than that of the blend A. There is large difference in the flexural behavior between A and B blends where the blend A records the highest value of flexural strength (F.S) at (5wt.%) while the blend B records the highest value of (F.S) at (20wt.%). From compression test, it is obvious that the values of compressive strength decrease of blend B more than that of the blend A as well as the same behavior can be obtained through the hardness test.

scholarly journals Effects of Irradiation by UV- Acceleration on Mechanical Properties of Polymer Blends (Polyester: Starch)

2018 ◽  
Vol 21 (1) ◽  
pp. 147 ◽  
Author(s):  
Sihama I. Salih ◽  
Qahtan A. Hamad ◽  
Safaa N. Abdul Jabbar ◽  
Najat H. Sabit
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Polymer Blends ◽  
Modulus Of Elasticity ◽  
Unsaturated Polyester ◽  
Flexural Modulus ◽  
Weight Ratio ◽  
Weight Fraction ◽  
Elongation Percentage

This work covers mixing of unsaturated polyester (un- polyester) with starch powders as polymer blends and study the effects of irradiation by UV-acceleration on mechanical properties of its. The unsaturated polyester was mixing by starch powders at particle size less than (45 µm) at selected weight fraction of (0, 0.5, 1, 1.5, 2, 2.5 and 3%). These properties involve ultimate tensile strength, modulus of elasticity, elongation percentage, flexural modulus, flexural strength, fracture toughness, impact strength and hardness. The results illustrate decrease in the ultimate tensile strength at and elongation percentage, while increasing modulus of elasticity, with increasing the weight ratio of starch powder to 3 % weight fraction, whereas the maximum value of hardness and flexural, impact properties happened at 1 % weight fraction for types of polymer blends.

scholarly journals Mechanical properties of bulk Sylgard 184 and its extension with silicone oil

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
R. Moučka ◽  
M. Sedlačík ◽  
J. Osička ◽  
V. Pata
Keyword(s):  
Mechanical Properties ◽  
Tensile Test ◽  
Ambient Temperature ◽  
Oil Content ◽  
Silicone Oil ◽  
Polymer System ◽  
Industrial Applications ◽  
Curing Temperature ◽  
Rotational Rheometer ◽  
Oil Concentration

AbstractDue to its simple curing and very good mechanical properties, Sylgard 184 belongs to the most widely and frequently used silicones in many industrial applications such as microfluidics and microengineering. On top of that its mechanical properties are further controllable through the curing temperature, which may vary from ambient temperature up to 200 °C; the lower the curing temperature the lower the mechanical properties (Johnston et al. in J Micromech Microeng 24:7, 2014. 10.1088/0960-1317/24/3/035017). However, certain specialised application may require even a softer binder than the low curing temperature allows for. In this study we show that this softening can be achieved with the addition of silicone oil into the Sylgard 184 system. To this end a series of Sylgard 184 samples with varying silicone oil concentrations were prepared and tested (tensile test, rotational rheometer) in order to determine how curing temperature and silicone oil content affect mechanical properties. Curing reaction of the polymer system was found to observe 2nd order kinetics in all cases, regardless the oil concentration used. The results suggest that within the tested concentration range the silicone oil addition can be used to soften commercial silicone Sylgard 184.

Sign in / Sign up

Export Citation Format

Share Document