scholarly journals Recent trends in Ni(II) sorption from aqueous solutions using natural materials

2021 ◽  
Author(s):  
Sylwia Charazińska ◽  
Ewa Burszta-Adamiak ◽  
Paweł Lochyński
Keyword(s):  
Aqueous Solutions ◽  
Sorption Capacity ◽  
High Efficiency ◽  
Quality Parameters ◽  
Ease Of Use ◽  
Industrial Scale ◽  
Waste Products ◽  
Nickel Ions ◽  
Sorption From Aqueous Solutions ◽  
Microbial Flocculant

AbstractThe use of materials of natural origin for the adsorption of heavy metal ions from aqueous solutions has gained attention in recent years among the scientific community. This is explained by the fact that nickel compounds, due to severe health consequences, are considered to be among the most dangerous to the environment. This article reviews the results of studies on the use of biosorbents for purification of aqueous solutions from nickel ions, and then attempts to classify them according to their origin. The characteristics of materials and their sorption capacity have been compared, and the removal mechanisms identified of which chemisorption and ion exchange are considered to be the most common. From the analyses, a major trend is the use of biomass; however, biosorbents from other groups also continue to attract the interest of researchers. Conducting laboratory studies can help select materials with high efficiency. The highest sorption capacity values for the materials in each group were: for waste products 56 mg Ni·g−1 (olive stone), for peat 61 mg Ni·g−1, for miscellaneous 225 mg Ni·g−1 (microbial flocculant GA1), for biomass 286 mg Ni·g−1 (Plantanus orientalis bark) and for composites/modified materials calcinated eggshells 769 mg Ni·g−1 (calcinated eggshells). However, for some materials the sorption phenomenon may be accompanied by precipitation in the presence of hydroxides, which significantly affects the sorption capacity achieved. There is a need to transfer these experiments to an industrial scale so as to verify their applicability. In such industrial scale applications, attention should be paid not only to the effectiveness of the material, but also to its availability, price, and ease of use, as well as the effect of the biosorbent in terms of changing the quality parameters of the aquatic environment.

scholarly journals Simultaneous Removal of Lead and Nickel Ions from Aqueous Synthetic Solutions by Chitosan Coated Cobalt Ferrite

2017 ◽  
Vol 68 (1) ◽  
pp. 1-5
Author(s):  
Rodica Elena Patescu ◽  
Claudia Maria Simonescu ◽  
Cristian Onose ◽  
Teodor Laurentiu Busuioc ◽  
Daiana Elena Pasarica ◽  
...  
Keyword(s):  
Experimental Data ◽  
Aqueous Solutions ◽  
Sorption Capacity ◽  
Cobalt Ferrite ◽  
Second Order ◽  
Simultaneous Removal ◽  
Order Model ◽  
Diffusion Kinetic ◽  
Nickel Ions ◽  
Pseudo Second Order

This research study deals with lead and nickel simultaneous removal from aqueous solutions by the use of chitosan coated cobalt ferrite as adsorbent. Batch removal tests were performed in order to establish the main parameters that influence the sorption capacity, removal efficiency and the selectivity of this adsorbent. The values of sorption capacity for lead and nickel experimentally determined are: 56.23 mg/g and respectively 45.11 mg/g. Langmuir and Freundlich adsorption isotherms were used to interpret the sorption experimental data. The kinetic data were explored by pseudo-first order, pseudo-second order and intraparticle diffusion kinetic models. The experimental data were well fitted with the pseudo-second order model for both heavy metals. The main conclusion that can be drawn from this research is that this material can be successfully used for the removal of lead and nickel from binary aqueous solutions and wastewater.

scholarly journals THE INFLUENCE OF THE DEACETYLATION DEGREE OF CHITOSAN IN THE FORM OF FLAKES ON THE EFFECTIVENESS OF NITRATES V SORPTION FROM AQUEOUS SOLUTIONS

2018 ◽  
Vol XXIII ◽  
pp. 88-96
Author(s):  
Tomasz Jóźwiak ◽  
Urszula Filipkowska ◽  
Paula Bugajska ◽  
Małgorzata Kuczajowska-Zadrożna ◽  
Artur Mielcarek
Keyword(s):  
Aqueous Solutions ◽  
Sorption Capacity ◽  
Process Time ◽  
Effect Of Ph ◽  
Maximum Sorption Capacity ◽  
Degree Of Deacetylation ◽  
Deacetylation Degree ◽  
Maximum Sorption ◽  
Sorption From Aqueous Solutions

The influence of the degree of deacetylation of chitosan from the range of DD = 75–90% on the effectiveness of sorption of nitrates from aqueous solutions was investigated. The scope of the research included: determining the effect of pH on the effectiveness of N-NO3 binding on chitosan sorbents and determining the sorption capacity of chitosan sorbents with different degrees of deacetylation after 5, 15, 30 and 60 minutes. The effectiveness of sorption of nitrates on chitosan sorbents increased in the series DD=75% < DD=85% < DD=90%. Regardless of the degree of deacetylation, the sorption effectiveness of nitrates on chitosan was the highest at pH 4. The amount of nitrate-related sorbents was the highest after 30 min of sorption. A process time which was too long resulted in desorption of nitrates. The maximum sorption capacity for chitosan with the degree of deacetylation DD = 75, 85 and 90% was 0.59 mg N-NO3/g, 0.60 mg N-NO3/g and 0.87 mg N-NO3/g, respectively.

THE INFLUENCE OF CHITOSAN FLAKE DEACETYLATION DEGREE ON ORTHOPHOSPHATE SORPTION EFFICIENCY FROM AQUEOUS SOLUTIONS

2018 ◽  
Vol XXIII ◽  
pp. 33-44 ◽  
Author(s):  
Paula Bugajska ◽  
Urszula Filipkowska ◽  
Tomasz Jóźwiak ◽  
Małgorzata Kuczajowska-Zadrożna
Keyword(s):  
Aqueous Solutions ◽  
Sorption Capacity ◽  
Ph Value ◽  
Sorption Process ◽  
Phosphorus Compounds ◽  
Desorption Process ◽  
Maximum Sorption Capacity ◽  
Deacetylation Degree ◽  
Maximum Sorption ◽  
Sorption From Aqueous Solutions

The article presents the effectiveness of orthophosphate sorption from aqueous solutions depending on the deacetylation degree of chitosan flakes. The first stage of the research was to determine the pH value at which the sorption process was the most effective (from the pH range 2–11). In the second stage, research was carried out to determine the maximum sorption capacities of chitosan with deacetylation degrees of 75%, 85% and 90% in relation to PO43-. The highest effectiveness of orthophosphate removal on chitosan, regardless of its deacetylation degree, was obtained at pH 4. At pH 2 and 3, the chitosan flakes dissolved. This study showed that the sorption effectiveness of phosphorus compounds depends on the deacetylation degree of chitosan. Along with the increase in deacetylation degree, the sorption capacity of chitosan also increases in relation to orthophosphates. It is related to the higher number of amino groups in the structure of chitosan, which are responsible for the sorption of pollutants in the form of anions. The maximum sorption capacity of chitosan-DD = 75% in relation to biogen was 5.13 mg/g, chitosan-DD = 85% was 5.65 mg/g, and chitosan-DD = 90% was 5.91 mg/g. After 60 minutes, the desorption process had begun and was most likely caused by an increase in the pH of the solution. Due to chitosan's ability to neutralise the sample and the associated risk of desorption, the time of sorbent contact with sewage cannot be longer than 60 minutes.

Phosphorus transport in saturated slag columns: experiments and mathematical models

1996 ◽  
Vol 34 (1-2) ◽  
pp. 153-160 ◽  
Author(s):  
S. H. Lee ◽  
S. Vigneswaran ◽  
K. Bajracharya
Keyword(s):  
Mathematical Models ◽  
Sorption Capacity ◽  
Algal Blooms ◽  
Sandy Loam ◽  
Dynamic Condition ◽  
Water Environment ◽  
Breakthrough Curves ◽  
Column Experiments ◽  
Phosphorus Transport ◽  
Waste Products

Excessive phosphorus (P as orthophosphate) is one of the major pollutants in natural water that are responsible for algal blooms and eutrophication. P removal by slag is an attractive solution if the P sorption capacity of slag is significant. To design an efficient land treatment facility, basic information on the behaviour of P in the media-water environment is required. In this study, detailed column experiments were conducted to study the P transport under dynamic condition, and mathematical models were developed to describe this process. The column experiments conducted with dust and cake waste products (slag) from a steel industry as adsorbing indicated that they had higher sorption capacity of P than that of a sandy loam soil from North Sydney, Australia. P transport in the dust and cake columns exhibited characteristic S-shaped or curvilinear breakthrough curves. The simulated results from a dynamic physical nonequilibrium sorption model (DPNSM) and Freundlich isotherm constants satisfactorily matched the corresponding experimental breakthrough data. The mobility of P is restricted by the adsorbents and it is proportional to the sorption capacity of them.

scholarly journals Preparation and Characterization of Novel Magnesium Composite/Walnut Shells-Derived Biochar for As and P Sorption from Aqueous Solutions

Agriculture ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 714
Author(s):  
Vladimír Frišták ◽  
Martin Pipíška ◽  
Vladimír Turčan ◽  
Stephen M. Bell ◽  
Haywood Dail Laughinghouse ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Anthropogenic Sources ◽  
Walnut Shell ◽  
Natural Ecosystems ◽  
Functional Changes ◽  
P Sorption ◽  
Sorption Efficiency ◽  
Walnut Shells ◽  
Potential Capacity ◽  
Sorption From Aqueous Solutions

Elevated or unnatural levels of arsenic (As) and phosphorus (P) concentrations in soils and waterbodies from anthropogenic sources can present significant hazards for both natural ecosystems and human food production. Effective, environmentally friendly, and inexpensive materials, such as biochar, are needed to reduce mobility and bioavailability of As and P. While biochar features several physicochemical properties that make it an ideal contaminant sorbent, certain modifications such as mineral-impregnation can improve sorption efficiencies for targeted compounds. Here, we conducted sorption experiments to investigate and quantify the potential utility of magnesium (Mg) for improving biochar sorption efficiency of P and As. We synthesized a Mg-modified walnut shells-derived biochar and characterized its ability to remove As and P from aqueous solutions, thereby mitigating losses of valuable P when needed while, at the same time, immobilizing hazardous As in ecosystems. SEM-EDX, FTIR and elemental analysis showed morphological and functional changes of biochar and the formation of new Mg-based composites (MgO, MgOHCl) responsible for improved sorption potential capacity by 10 times for As and 20 times for P. Sorption efficiency was attributed to improved AEC, higher SSA, chemical forms of sorbates and new sorption site formations. Synthetized Mg-composite/walnut shell-derived biochar also removed >90% of P from real samples of wastewater, indicating its potential suitability for contaminated waterbody remediation.

scholarly journals Adsorption of Rare Earth Elements from Aqueous Solutions Using Geopolymers

Proceedings ◽  
2018 ◽  
Vol 2 (10) ◽  
pp. 567 ◽  
Author(s):  
Željka Fiket ◽  
Ana Galović ◽  
Gordana Medunić ◽  
Martina Furdek Turk ◽  
Maja Ivanić ◽  
...  
Keyword(s):  
Rare Earth ◽  
Rare Earth Elements ◽  
Aqueous Solutions ◽  
High Efficiency ◽  
Low Cost ◽  
Coal Ash ◽  
Industrial Sector ◽  
Efficient Removal ◽  
Model Solutions ◽  
Technology Applications

Rare earth elements, i.e., lanthanides, are important components of many recently developed technology applications. However, their increasing use in the industrial sector, medicine, and agriculture over the last few decades has provided them with the title of “new pollutants”. Different methods are now applied for the removal of various pollutants from wastewaters, whereby the emphasis is placed on adsorption due to its simplicity, high efficiency, and low cost. In the present study, geopolymers prepared from coal ash were examined regarding their capacity for the adsorption of lanthanides from model solutions. The obtained results indicate the efficient removal of lanthanides by prepared geopolymers, depicting them as effective adsorbents for this group of elements.

scholarly journals The use of the method of controlling the electrochemical parameters of aqueous solutions to combat complications in the operation of oil field pipelines

2021 ◽  
Vol 225 ◽  
pp. 01008
Author(s):  
Oleg Latypov ◽  
Sergey Cherepashkin ◽  
Dina Latypova
Keyword(s):  
Aqueous Solutions ◽  
Oil And Gas ◽  
High Efficiency ◽  
Oil Field ◽  
Oil Fields ◽  
Control Methods ◽  
Test Results ◽  
Chemical Reagents ◽  
Electrochemical Parameters ◽  
Very High

Corrosion of equipment in the oil and gas complex is a global problem, as it contributes to huge material costs and global disasters that violate the environment. Corrosion control methods used to protect equipment do not always ensure the absolute safety of the operation of oil and gas facilities. Moreover, they are quite expensive. The developed method for controlling the electrochemical parameters of aqueous solutions to combat complications during the operation of oil-field pipelines provides the necessary protection against corrosion. The method is economical and environmentally friendly, since it does not require the use of chemical reagents. The test results have shown a very high efficiency in dealing with complications in oil fields.

Effect of ascorbic acid, oxygen and storage duration on patulin in cloudy apple juice produced on a semi-industrial scale

2020 ◽  
pp. 1-12
Author(s):  
C. El Hajj Assaf ◽  
N. De Clercq ◽  
E. De Paepe ◽  
G. Vlaemynck ◽  
E. Van Coillie ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Apple Juice ◽  
Quality Parameters ◽  
Industrial Scale ◽  
Penicillium Expansum ◽  
Innovative Technology ◽  
Reaction Products ◽  
Low Oxygen ◽  
Storage Duration ◽  
Oxygen Conditions

Patulin (PAT), a mycotoxin mainly produced by Penicillium expansum, is of high concern with regard to human food safety. This study examined the stability of PAT in artificially contaminated cloudy apple juice (CAJ) produced on a semi-industrial scale using an innovative technology allowing degassing and pressing under low-oxygen conditions (VaculIQ 1000). The effects of adding ascorbic acid (AA), degassing during production and storing in the dark at 20 °C on the PAT concentration were studied, as well as possible degradation and reaction products formed. The highest PAT degradation (50%) was observed for flash-pasteurised juice with AA added, produced under low-oxygen conditions and degassed and stored for 14 days at 20 °C in the dark in aluminium laminate aseptic bags. Juices produced showed no significant differences in the quality parameters measured and did not show significant formation of reaction products. Further research needs to be focused on the fate of PAT in CAJ produced on an industrial level with and without addition of AA.

scholarly journals Adsorption of Model Dyes on Recycled Silica Gel

Proceedings ◽  
2019 ◽  
Vol 48 (1) ◽  
pp. 10
Author(s):  
Fatima Sbait Wahshi ◽  
Maitha Dhaiman Alqahtani ◽  
Manhal Abdulla ◽  
Tholkappiyan Ramachandran ◽  
Fathalla Hamed ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Silica Gel ◽  
Adsorption Process ◽  
Food Colorants ◽  
Waste Products ◽  
Optimal Procedure ◽  
Biological Stains

Silica gel was used as an adsorbent for dyes in aqueous solutions. Afterwards, the silica gel with the adsorbed dye was heated to 600 °C, at which the dye combusted, leaving behind clean silica gel. This silica gel can be reused in the adsorption process. The operation leaves behind little waste products. It is an optimal procedure for educational and other research laboratories which are working with biological stains, food colorants and some non-commercial dyes.

Sign in / Sign up

Export Citation Format

Share Document